Crestron AMPI-8075 Manual

Crestron Modtager AMPI-8075

Læs gratis den danske manual til Crestron AMPI-8075 (10 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Crestron AMPI-8075, eller vil du spørge andre brugere om produktet?

Side 1/10
The Crestron® AMP-8075, AMP-8150, AMPI-8075, and AMPI-8150 are
high-efficiency multichannel power amplifiers offering excellent sound
quality. All four feature similar operation. For simplicity within this guide,
the term "amplifier" is used for all models except where noted.
In the Box
1 AMP-8075, AMP-8150, AMPI-8075, or AMPI-8150,
8-Channel Commercial Amplifier
Additional Items
2 Bracket, Rack Ear, 1U (2032122)
2 Bracket, Rear Mounting (2045677)
8 Connector, 2-Pin (2044402)
8 Connector, 3-Pin (2003575)
AMP-8075 and AMP-8150 Only
1 Fuse, 10.0 A, Time Lag, 1.25 in. x 0.25 in., Ceramic Cartridge,
250 V (2017577)
1 Cable, Power, 6 ft 7 in. (2001134)
AMPI-8075 and AMPI-8150 Only
1 Fuse, 6.3 A, Time Lag, 5 x 20 mm, Ceramic Cartridge,
250 V (2024846)
1 Cable, Power (P/N varies by country)
Install the Device
These devices occupy 1U of rack space.
To install the included rack ears:
1. Use a #1 Phillips screwdriver to remove the three screws from each
side of the front of the amplifier as shown in the following illustration.
2. Use the six screws removed in the previous step to attach the included
rack ears to the amplifier.
AMP(I)-8075 and AMP(I)-8150
QuickStart
Crestron® 8-Channel Commercial Amplifiers
1
To install the included rear mounting brackets:
1. Use a #1 Phillips screwdriver to remove the four screws from the rear
of the amplifier as shown in the following illustration.
2. Use the four screws removed in the previous step to attach the
mounting brackets to the rear of the amplifier.
Then mount the device into the rack using four rack mounting screws (not
included).
Connect the Device
Connect the device as called out in the following illustrations. Connect
power last.
CAUTIONS:
l Keep the device unplugged until all of the input, network, and speaker
wiring is complete.
l Check the speaker cables for shorts and frayed wiring around the
SPEAKER OUTPUTS connectors.
NOTES:
l Ensure the unit is properly grounded by connecting the chassis
ground lug to an earth ground (building steel).
l To prevent overheating, do not operate this product in an area that
exceeds the environmental temperature range listed in the table of
specifications on the product web page. Fans provide side-to-side
airflow for cooling. Do not block the ventilation holes.
2
AMP(I)-8075 and AMP(I)-8150
QuickStart
Crestron® 8-Channel Commercial Amplifiers


Produkt Specifikationer

Mærke: Crestron
Kategori: Modtager
Model: AMPI-8075

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron AMPI-8075 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Modtager Crestron Manualer

Crestron

Crestron AMP-X300 Manual

23 September 2025
Crestron

Crestron AMP-X500 Manual

23 September 2025
Crestron

Crestron AMPI-8150 Manual

23 September 2025
Crestron

Crestron AMP-X50MP Manual

23 September 2025
Crestron

Crestron AMPI-8075 Manual

23 September 2025
Crestron

Crestron HD-DA4-4KZ-E Manual

23 September 2025
Crestron

Crestron AMP-225 Manual

21 August 2024
Crestron

Crestron SRD-AMP-1 Manual

21 August 2024

Modtager Manualer

Nyeste Modtager Manualer