Crestron IW4X8-W Manual


Læs gratis den danske manual til Crestron IW4X8-W (3 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Crestron IW4X8-W, eller vil du spørge andre brugere om produktet?

Side 1/3
The Crestron® Reference speaker REFERENCE IW4X8-W-T-EACH made
by Origin Acoustics delivers the pinnacle of performance for demanding
residential installations.
In the
In the
In the
In the In the Box
Box
Box
BoxBox
1REFERENCE IW4X8-W-T-EACH
 
Additional Items
Additional Items
Additional Items
Additional ItemsAdditional Items
1 Grille
1 Guitar pick (To turn the Spring Lock™ release)
1 Cutout Template
Installation
Installation
Installation
Installation Installation
Prepare the
Prepare the
Prepare the
Prepare the Prepare the Mounting
Mounting
Mounting
Mounting Mounting Hole
Hole
Hole
HoleHole
Before finalizing the speaker location, check to make sure there are no
fixtures, pipes, air ducts, joists, or other possible obstructions. If
applicable, use a good quality stud finder to locate joists. If there are no
obstructions, use the supplied template to trace an outline of the
mounting hole.
To identify obstructions, do the following:
Use a drywall saw to cut a small hole at a 45° angle. An angle cut lsimplifies repair since the removed piece can be reinserted to help
plug the hole.
Use a piece of stiff wire, bent into an L shape, with one end long lenough to explore an area equal to the size of the speaker with the
toggle clamps extended. Insert the wire into the hole, make sure it
rotates freely in a complete circle and that there is sufficient depth.
If there are no obstructions, use the supplied template to trace outlines
of the mounting hole on the wall. Cut the final mounting hole at a 90°
angle to the wall.
REFERENCE
REFERENCE
REFERENCE
REFERENCEREFERENCE IW4X8-W-T-EACH
IW4X8-W-T-EACH
IW4X8-W-T-EACH
IW4X8-W-T-EACHIW4X8-W-T-EACH QuickStart
Reference
Reference
Reference
ReferenceReference 4
4
4
44 in.
in.
in.
in.in. x
x
x
xx 8
8
8
88 in.
in.
in.
in.in. In-Wall
In-Wall
In-Wall
In-WallIn-Wall Speaker,
Speaker,
Speaker,
Speaker,Speaker, White
White
White
WhiteWhite Textured,
Textured,
Textured,
Textured,Textured, Single
Single
Single
SingleSingle
1
1
1
11
Paint the
Paint the
Paint the
Paint the Paint the Speaker Grille
Speaker Grille
Speaker Grille
Speaker GrilleSpeaker Grille
Painting the speaker grille should be done prior to mounting.
1. Carefully remove the thin cloth on the underside of the grille, and set
it aside for re-installation.
2. Lightly spray paint the front of the grille from a distance. Be careful
not to plug any of the holes.
3. Once the paint is dry, put the cloth back on the underside of the grille.
Installing the
Installing the
Installing the
Installing the Installing the Speaker Cable
Speaker Cable
Speaker Cable
Speaker CableSpeaker Cable
Run the speaker cable (not included) from the audio source to the
speaker location, observing all appropriate local codes. Strip the ends of
the speaker cable approximately 0.25 in. to 0.50 in. (~6 mm to ~12 mm)
and twist the strands.
Connecting the
Connecting the
Connecting the
Connecting the Connecting the Speaker Cable
Speaker Cable
Speaker Cable
Speaker CableSpeaker Cable
Connect the speaker cable (not included) to the spring terminals by
pressing the top of the terminals down and inserting the exposed
strands into the hole. Make sure that the positive wire is attached to the
red connection, and the negative wire is attached to the black
connection.
Mount/Remove the
Mount/Remove the
Mount/Remove the
Mount/Remove the Mount/Remove the Speaker
Speaker
Speaker
SpeakerSpeaker
On the speaker, make sure all the Spring Lock notches are in the vertical
position.
1. Fit the speaker into the hole, and using included guitar pick, turn the
Spring Lock releases on the left side 90° clockwise and on the right
side 90° counterclockwise.
2. When you turn each Spring Lock release, you should hear each Spring
Lock clamp down on the wall.
NOTE:
NOTE:
NOTE:
NOTE:NOTE: Do not overtighten the Spring Lock releases.
3. To remove the speaker, turn the Spring Lock releases on the left side
90° counterclockwise and on the right side 90° clockwise.
2
2
2
22
REFERENCE
REFERENCE
REFERENCE
REFERENCEREFERENCE IW4X8-W-T-EACH
IW4X8-W-T-EACH
IW4X8-W-T-EACH
IW4X8-W-T-EACHIW4X8-W-T-EACH QuickStart
Reference
Reference
Reference
ReferenceReference 4
4
4
44in.
in.
in.
in.in. x
x
x
xx8
8
8
88 in.
in.
in.
in.in.In-Wall
In-Wall
In-Wall
In-WallIn-Wall Speaker,
Speaker,
Speaker,
Speaker,Speaker, White
White
White
WhiteWhite Textured,
Textured,
Textured,
Textured,Textured, Single
Single
Single
SingleSingle


Produkt Specifikationer

Mærke: Crestron
Kategori: Højttaler
Model: IW4X8-W

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron IW4X8-W stil et spørgsmål nedenfor, og andre brugere vil svare dig