Cyber Acoustics PS-2370 Manual

Cyber Acoustics Vugge & Dockingstation PS-2370

Læs gratis den danske manual til Cyber Acoustics PS-2370 (2 sider) i kategorien Vugge & Dockingstation. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Cyber Acoustics PS-2370, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PS-2370

WIRELESS STEREO SPEAKER

Your PS-2370 speaker contains Bluetooth® technology, allowing you to wirelessly play music from nearly any

Bluetooth enabled device. Now you can enter the room, select music to play on most smartphones, tablets, or

laptops, and control your listening enjoyment from the comfort of your lap. From your device, you can easily

control and change music tracks, playlists, adjust volume up or down, or even listen to podcasts, or many other

audio applications available on your device.

Congratulations

Wireless mono speaker

Cables

Carry pouch

Owner’s Guide with connection diagram

Box contents

• Read Instructions Carefully – All safety and operating instructions should be read before this device is operated.

• Heat – Keep speakers out of extreme heat and away from sources producing extreme heat, such as, space heaters, radiators, stoves and other devices

emitting heat.

• Water and Moisture – Keep speakers out of the rain and humid conditions to avoid electric shock. Keep speakers away from water, such as, sinks, bathtubs,

swimming pools, washing machines, tubs of water, etc. in order to avoid electric shock. Keep water from dripping on the device, do notput objects

containing water, such as vases on top of the device, and do not put the device near standing water.

• Cleaning – Use a dry cloth for cleaning. Do not wipe any part of the system with cleaning solvents, such as, furniture wax, bleach, benzene, or ammonia.

Speaker connection

Caution

Please read the step by step instructions along with the diagrams provided.

Charging

• Turn off the speaker.

• Plug in the included USB charging cable for charging (mini-USB plug to speaker and standard USB plug to USB power source),

or fold down the built-in wall prongs and plug the speaker into an available wall socket.

• LED will be red while the speaker is charging.

(LED will be purple while the speaker is powered on and charging)

USB cable for charging

:03

1 2 3 4 5

CA-901BT Conne ct ed

Headse t Not Conne cted

AUX

3.5mm

(not included)

Pairing with the speakers for the ﬁrst time

Before you start, please fully charge up the PS-2370 speaker.

Ensure the Bluetooth capability of your source device is turned on and ready to discover new items. If needed, see your device’s instructions to add or setup a

Bluetooth device.

When you ﬁrst turn on the PS-2370 speaker system, the Bluetooth functionality is not engaged. Below steps are the guidelines for you to connect with

PS-2370 speaker.

To wirelessly connect with the Bluetooth function of your speakers:

1. Make sure the speaker is fully charged up. Switch on the device by press & hold the Power / Bluetooth button for 3 seconds, or until you hear an audible melody. The

device is now switched on with blue LED light up.

2. Press the Power / Bluetooth button for once to trigger “Bluetooth pairing” mode. You are hear another audible melody and LED will now blink in red and blue alternatively.

3. With your audio source (smartphone, tablet, iPod, etc.), ﬁnd the Bluetooth device list and look for “PS-2370.” Select it to pair/connect with the speakers.

4. When the device connects, you will hear a short audible beep, the LED will stop blinking and will turn to a solid “on” state.

5. Now you can go to your music applications; press play and enjoy your music.

Turning off your source device will automatically disconnect your speakers. If you plan on not using your speakers again for an hour or more, we recommend you turn off your

PS-2370 speakers to save battery until you are ready to listen again.

Pairing with the speakers after the ﬁrst time

Once you’ve successfully paired your speakers, your device will automatically connect with it on successive returns to the room in which they are situated. You will be able to

immediately go the audio application of your choice, select your audio tracks, and begin enjoying almost at once.

Powering off the speakers by pressing and holding for approximately 3 seconds will disconnect from your source device automatically. Turn your speakers back on by

pressing and holding the power button for 3 seconds. While your device is still Bluetooth-enabled, it will allow your device to reconnect within just a couple of seconds,

without any further effort.

Disconnecting and pairing with a new device

Ensure the speaker is fully charged up. Switch on the device by press & hold the Power / Bluetooth button for 3 seconds, or until you hear an audible melody.

The device is now switched on with blue LED light up.

Repeat step 2 – 5 as with the ﬁrst time you connected with the speaker. .

Playing Audio via AUX in jack*

1. Make sure the speaker is fully charged.

2. Power on the device by pressing and holding for about 3 seconds on the power / Bluetooth button.

3. Plug in a 3.5mm AUX cable into AUX jack.

4. Connect another end of the AUX cable with your secondary audio source.

5. Music will play from the speaker system when you start the playback on the secondary audio source

* AUX input is prioritized (overrides Bluetooth audio source) whenever a 3.5mm cable is plugged in.

110V Wall outlet for charging

Additional support

Make sure the speaker is charged up.

Speaker Does Not Produce Sound.

Trouble shooting

Symptom

Speaker System Will Not Power

solution

Verify the speaker is getting power. Check above steps.

Verify that all cables are plugged into the correct jacks or that the Bluetooth is paired correctly.

Adjust the sound source’s master volume control by balancing the volume until it’s centered.

Sound Is Distorted.

Can’t connect for the ﬁrst time

1. Turn off the speaker completely by pressing and holding the power / Bluetooth button for around 3 seconds until LED turns off.

2. Check your Bluetooth source device and be sure you have found the section that allows you to see nearby Bluetooth products. If you see the PS-2370 on the list, but

cannot connect, you may need to try and synch again. To start fresh, with your Bluetooth device, select “Forget this device,” to remove the PS-2370 from the list. You

may need to turn off the Bluetooth function on your device to fully clear your list.

3. Turn the speakers back on by pressing and holding the power / Bluetooth button for around 3 seconds. And go into the “pairing mode” by repeat

step 2 – 5 as with the ﬁrst time you connected with the speaker.

4. Return to your source device, and re-enable the Bluetooth function. Look for the PS-2370 speakers to show back up on the list.

5. Select these speakers on your screen, and listen for the audible beep to conﬁrm pairing.

Can’t connect when returning

1. If, for some reason, the PS-2370 does not automatically connect back with your Bluetooth-enabled device, you may need to physically go into your device’s Bluetooth

settings and select “PS-2370” to reconnect.

2. If the above step does not work, see steps 1-5 in the “Can’t connect for the ﬁrst time” section above.

Audio is choppy, has erratic static, or keeps disconnecting

1. Be sure to check your room environment. Today’s Bluetooth technology has a designed limit of approximately 30 feet, line of sight. This generally means your best

results will be limiting your source device and speakers to the same room. Extremely large rooms, or rooms with a lot of wireless electronics, routers, etc, may

affect the quality of sound, connection, or connection consistency.

2. Check for obstructions, walls or other objects that might impede the Bluetooth signal.

3. Try returning to the source device to a closer proximity with your speakers.

Still can’t connect

1. Be sure to check your room environment. Today’s Bluetooth technology has a designed limit of approximately 30 feet, line of sight. This generally means

your best results will be limiting your source device and speakers to the same room. Extremely large rooms, or rooms with lots of wireless electronics,

wi-ﬁ routers, radio transmitters, etc, may affect your ability to pair.

2. Check to see if any other devices are already connected to the PS-2370. The speakers can only pair with one device at a time. If you need to unpair,

choose “Forget this device” from your source. Then follow the setup pairing options as detailed above.

3. Check the battery life of your source device and charge if necessary. Most devices operate best when charged above 20% minimum battery level.

Incoming phone calls

When connecting to some Android smartphones (depends on OS version), incoming voice audio may go to the Bluetooth speaker. To ensure you can answer

the call through your phone only, uncheck the “Phone Audio” option of the device name under Bluetooth settings. Or you can switch to phone audio manually,

when there is an incoming call.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trouble shooting Bluetooth connections

Online

The latest updated video tutorials, FAQ, and product feature speciﬁcations are available online 24/7

http://cyberacoustics.com

In person

Technical support is also available at 360-883-0333, M-F 8-5 West Coast time.

Produkt Specifikationer

Mærke:	Cyber Acoustics
Kategori:	Vugge & Dockingstation
Model:	PS-2370
Tænd-/slukkontakt:	Ja
Bredde:	182.88 mm
Dybde:	68.58 mm
Højde:	66.04 mm
Vægt:	- g
Brugervejledning:	Ja
Produktfarve:	Sort
Indbygget skærm:	Ingen
Produkttype:	Bærbar mono højttaler
Pakkevægt:	498.952 g
Pakkedybde:	83.82 mm
Pakkebredde:	205.74 mm
Pakkehøjde:	177.8 mm
Wi-Fi:	Ingen
Bluetooth:	Ja
Indbygget lommelygte:	Ingen
Batteriteknologi:	Lithium-Ion (Li-Ion)
Antal højttalere:	1
Udgangseffekt (RMS):	- W
Volumenkontrol:	Digital
Kabler inkluderet:	USB
Anbefalet brug:	Universel
Forbindelsesteknologi:	Kabel & trådløs
Lyd-output kanaler:	1.0 kanaler
LED-indikatorer:	Ja
Strømkilde type:	AC, Battery, USB
AC-adapter inkluderet:	Ja
Indbygget kortlæser:	Ingen
Batterilevetid (maks.):	8 t
3,5 mm stik:	Ja
USB-tilslutning:	Ja
Batteritype:	Indbygget
AUX-indgang:	Ja
Bærehåndtag:	Ingen
Produktdesign:	Rør
USB-opladningsport:	Ja
Rejseetui:	Ja
Indbygget oplader:	Ja