CyberPower CPS600E Manual


Læs gratis den danske manual til CyberPower CPS600E (44 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om CyberPower CPS600E, eller vil du spørge andre brugere om produktet?

Side 1/44
K01-0000208-02
CPS600E-DE
User’s Manual
2
SAFETY AND EMC INSTRUCTIONS
This manual contains important safety instructions. Please read and follow all instructions carefully
during installation and operation of the unit. Read this manual thoroughly before attempting to unpack,
install, or operate your Emergency Power System (EPS).
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled
indoor area free of conductive contaminants. (Please see specifications for acceptable temperature
and humidity range).
CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service the battery.
There are no serviceable parts inside, except for the battery.
CAUTION! EPS must be connected to an AC power outlet with circuit breaker protection. Do not plug
into an outlet that is not grounded. If you need to de-energize this equipment, turn off and unplug the
unit.
CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC power source before
servicing EPS, replacing the external battery or installing equipment.
CAUTION! To reduce the risk of fire, only connect the EPS to a circuit with 10 amperes maximum
branch circuit over-current protection in accordance with the CE requirement.
CAUTION! The building wiring socket outlet (shockproof socket outlet) must be easily accessible and
close to the EPS.
CAUTION! Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable of your
equipment) to connect the EPS to the building wiring socket outlet (shockproof socket outlet).
CAUTION! Please use only VDE-tested, CE-marked power cables to connect the loads to the EPS.
CAUTION! When installing the equipment, ensure that the sum of the leakage current of the EPS and
the connected equipment does not exceed 3.5mA.
CAUTION! Do not disconnect the mains cable on the EPS or the building wiring socket outlet
(shockproof socket outlet) during operations since this would remove the protective ground of the EPS
and of all connected loads.
CAUTION! This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT!
DO NOT use in any circumstance that would affect operation and safety of any life support equipment,
any medical applications or patient care.
DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire or electric shock, do not use
with or near an aquarium. Condensation from the aquarium can cause the unit to short out.
DO NOT INSTALL THE EPS WHERE IT WOULD BE EXPOSED TO DIRECT SUNLIGHT OR NEAR
HEAT!
DO NOT BLOCK OFF VENTILATION OPENINGS IN THE EPS’S HOUSING!
SAFETY:
EN62040-1-1
EMI:
Conducted Emission: IEC/EN 62040-2…Category C2
Radiated Emission: IEC/EN 62040-2……Category C2
Harmonic Current: IEC/EN61000-3-2
Voltage Fluctuations and Flicker: IEC/EN61000-3-3


Produkt Specifikationer

Mærke: CyberPower
Kategori: Uafbrydelig strømforsyning (UPS)
Model: CPS600E
Bredde: 240 mm
Dybde: 162 mm
Højde: 90 mm
Vægt: 4320 g
Produktfarve: Gul
Skærmtype: LCD
Pakkevægt: 5220 g
Pakkedybde: 230 mm
Pakkebredde: 330 mm
Pakkehøjde: 176 mm
Batteriteknologi: Blybatterier (VRLA)
Formfaktor: Tower
Opbevaringstemperatur (T-T): -15 - 45 °C
Relativ luftfugtighed ved drift (H-H): 0 - 95 %
Relativ luftfugtighed ved opbevaring (H-H): 0 - 95 %
Driftstemperatur (T-T): 0 - 40 °C
Udgangseffekt: 420 W
Certificering: CE
LED-indikatorer: Strøm
Bæredygtighedscertifikater: RoHS
Driftshøjde: 0 - 3000 m
Ikke-drift højde: 0 - 15000 m
Indgangsfrekvens: 50/60 Hz
Strømstik: C14 forbinder
AC udgange, antal: 1 AC stikkontakt(er)
Indgående driftsspænding (maks.): 270 V
Output strømkapacitet (VA): 0.6 kVA
Indgående driftsspænding (min.): 170 V
Udgangs driftsspænding (min.): 220 V
Udgangs driftsspænding (maks.): 230 V
Beskyttelse ved overspænding: Ja
Bølgeform: Sine
Antal indgående faser: 1
Antal udgående faser: 1

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower CPS600E stil et spørgsmål nedenfor, og andre brugere vil svare dig