Da-Lite Parallax Thin 29170 Manual

Da-Lite Projektionslærred Parallax Thin 29170

Læs gratis den danske manual til Da-Lite Parallax Thin 29170 (4 sider) i kategorien Projektionslærred. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Da-Lite Parallax Thin 29170, eller vil du spørge andre brugere om produktet?

Side 1/4
INSTRUCTION BOOK FOR
Parallax Thin
2
Preparation
Note: It requires two people to install a Parallax Thin. To maintain
optimal projected image geometry and screen alignment, a lat
and straight wall free from obstructions and angular distortions
should be used.
Tools Required For Assembly
Level Measuring Tape
Choose a clean work area for assembly using padded material or
other soft, clean materials. The work area should be larger than
the overall screen size and directly in front of the location where
the screen is to be installed.
Hardware Provided
44 Wall Bracket
(2) 92”, 96 and 105½” Wide Screens
28 Wall Bracket
(2) 80” and 87” Wide Screens
Cleaning
Parallax screen surface can be cleaned as follows:
Using a white clean cloth (100% cotton preferred) that is dampened with clean water, gently wipe the area in a horizontal direction. Do
not wipe in a vertical direction or with a circular motion. Using a dry 100% cotton cloth, wipe screen surface dry in horizontal direction
after each cleaning. Windex Original spray cleaner can be used on tough to clean areas.
Drill Drill Bits
(1) Striker plate with countersunk hole for #10 screw


Produkt Specifikationer

Mærke: Da-Lite
Kategori: Projektionslærred
Model: Parallax Thin 29170

Har du brug for hjælp?

Hvis du har brug for hjælp til Da-Lite Parallax Thin 29170 stil et spørgsmål nedenfor, og andre brugere vil svare dig