Dahua Technology DS11 Manual

Dahua Technology Ikke kategoriseret DS11

Læs gratis den danske manual til Dahua Technology DS11 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Dahua Technology DS11, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Wireless Chime

Quick Start Guide

V1.1.01.2.51.32.16560-000

This chapter describes the contents covering proper handling of the

device, hazard prevention, and prevention of property damage.

Read these contents carefully before using the device, comply with them

when using, and keep it well for future reference.

About the Manual

The manual is for reference only. If there is inconsistency between the

manual and the actual product, the actual product shall prevail.

We are not liable for any loss caused by the operations that do not

comply with the manual.

The manual would be updated according to the latest laws and

regulations of related regions. For detailed information, see the paper

manual, CD-ROM, QR code or our official website. If there is

inconsistency between paper manual and the electronic version,the

electronic version shall prevail.

All the designs and software are subject to change without prior written

notice. The product updates might cause some differences between

the actual product and the manual. Please contact the customer

service for the latest program and supplementary documentation.

There still might be deviation in technical data, functions and operations

description, or errors in print.

If there is any doubt or dispute, please refer to our final explanation.

Upgrade the reader software or try other mainstream reader software

if the manual (in PDF format) cannot be opened.

All trademarks, registered trademarks and the company names in the

manual are the properties of their respective owners.

Appearance

Indicator Light

Pairing Button

Speaker

Description of Pairing Button

Description of Indicator Light

Blue Solid

Wi-Fi is connected successfully.

Blue Flashing

Wi-Fi is not connected.

Enable hotspot.

Description of Reset Button

Reset Button

Dismantling Buckle

Power Plug

Troubleshooting

Important Safeguards and Warning

Q: The device cannot work normally?

Restore default settings of the device, and then configure the device

again.

Q: How to restore factory settings?

Tap and hold the pairing button or the reset button for 10 seconds.

The blue light will be on and then off, and voice prompts "Device is

undergoing hard reset."

Q: How to enter wireless configuration mode?

Tap the pairing button, the indicator light flashes blue and voice

prompts "Wi-Fi hotspot is enabled."

Check the LED indicator light. If it is flashing blue, it means that the

device failed to connect to the network. Make sure that the wireless

router can connect to the network. If the network connection is

successful, please configure network for the device again.

Q: The device is not online?

Start to Use

CAUTION

If your Wi-Fi network signal is weak during the setup process, please

move your router closer to your chime or add a Wi-Fi extender.

Note that ordless product might affect the Wi-Fi signal.

Do not place or install the device in a place exposed to sunlight or near

the heat source.

Keep the device away from dampness, dust or oot.

Keep the device installed horizontally on the stable place to prevent it

from falling.

Do not drop or splash liquid onto the device, and make sure there is no

object filled with liquid on the device to prevent liquid from flowing into

the device.

Install the device in a well-ventilated place, and do not block the

ventilation of the device.

Operate the device within the rated range of power input and output.

Do not dissemble the device.

Transport, use and store the device under the allowed humidity and

temperature conditions.

Operation Requirements

Q: Connection is overtime?

After the device has enabled hotspot, your smartphone doesn’t

connect to the hotspot for a long time, which leads to connection

overtime.

Before the app prompts waiting to connect to the network, the

device already starts configuration.

Please visit our website, contact the supplier or customer service if

there is any problem occurred when using the device.

If there is any uncertainty or controversy, please refer to our final

explanation.

Press the button to enable/disable hotspot, and voice

prompts "Wi-Fi hotspot is enabled/disabled."

Press and hold the button for about 10 seconds to restore

factory defaults, and voice prompts "Device is undergoing

hard reset."

Step 1: Download and Log in to App

Connect your mobile phone to Wi-Fi , and then scan QR code below

to download and install the app.

Step 2: Add Device

Tap "+" at the upper-right conner on the Home page and tap SN/Scan

Scan QR code on the device or the packaging box to get the SN, or

manually enter the SN.

Power on the chime, tap the pairing button to enable Wi-Fi hotspot,

the voice prompts "Wi-Fi hotspot is enabled", and the indicator light

flashes blue.

Run the app, and register an account for the first-time use.

Step 3: Link Chime

Connect your mobile phone with hotspot. Hotspot Wi-Fi name is

Doorbell-device serial number.

Go back to the app, and then set a password for your chime.

Follow the app guide to connect your chime.

Note:

Make sure that you have added a video doorbell.

Se ptu

A c fu ydd Su cess ll

Config

Network

Password

Connect

Chime

Ring Linkage

XXXXXXXXXXXXXXX

Ring Setup

Link Chime

Ring Linkage

Ad vicd e D e

Device

Scan

Setup

Password

Soft-AP

enable device hotspot

Press and hold the button on the side panel of

the chime with a pin for about 10 seconds to

restore factory defaults, and voice prompts

"Device is undergoing hard reset."

On app Home interface, select the video doorbell, and then tap

Device Details.

Tap . The wireless chime list is displayed.Ring Linkage

Select the chime on the list, and then tap to add it.Save

Produkt Specifikationer

Mærke:	Dahua Technology
Kategori:	Ikke kategoriseret
Model:	DS11

Har du brug for hjælp?

Hvis du har brug for hjælp til Dahua Technology DS11 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Dahua Technology Manualer

Dahua Technology ITSE1200-TA-N08 Manual

17 November 2025

Dahua Technology XVR5104/08H-X-4/8P Manual

15 November 2025

Dahua Technology XVR7216AN-4K-I2 Manual

15 November 2025

Dahua Technology EVS5016S-V2 Manual

15 November 2025

Dahua Technology DHL49 Manual

15 November 2025

Dahua Technology XVR7104/08E-4KL-B-X Manual

14 November 2025

Dahua Technology HAC-T3A41-VF Manual

14 November 2025

Dahua Technology XVR5232AN-4KL-I2 Manual

13 November 2025

Dahua Technology EVS7124S Manual

13 November 2025

Dahua Technology HAC-HDBW3231E-ZH Manual

13 November 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ELO 5054L Manual

29 November 2025

Gladiator GAWU16MSPK Manual

29 November 2025

Sunbeam DiamondForce HGM3000DF Manual

29 November 2025

Vevor WK320018-2 Manual

29 November 2025

Vevor KT2027B Manual

29 November 2025

Icon LivePod Manual

29 November 2025

Mars Gaming MC-PULSAR Manual

29 November 2025

Reflexion ACW2190 Manual

29 November 2025

Microchip PIC32AK1216GC41036 Manual

29 November 2025

Hilti PLT 400 Manual

29 November 2025