Draper Access/V Manual

Draper Projektionsskærm Access/V

Læs gratis den danske manual til Draper Access/V (8 sider) i kategorien Projektionsskærm. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Draper Access/V, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Contents
Overview - Components .......................................................................................1
Section 1 - Removing Shipping Brackets
(Tab-Tensioned, "V" Surfaces only)
.......2
PLEASE READ - Safety Information ....................................................................2
Section 2 - Hanging Screen .................................................................................3
Section 3 - Bottom Access FIT Panel Installation/Removal ..........................3
Section 4 - Motorized Roller/Fabric Installation ..............................................4
Section 5 - Motorized Roller/Fabric Removal ...................................................4
Section 6 - Operation............................................................................................5
Section 7 - Tab-Tension Adjustment Procedure ..............................................5
Section 8 - Limit Adjustments .............................................................................6
Section 9 - Case Length Dimensions ................................................................. 7
Section 10 - Case Width Dimensions .................................................................7
Section 11 - Mounting Bracket Dimensions......................................................7
Section 10 - Wiring Diagrams: 110-120V Motor and Quiet Motor ..................8
Overview - Components
CAUTION
Read and understand all warnings
(Page 2)
before beginning installation.
Electrical
Cutout
Tab Tensioning
“V” Dowel
“E” Dowel
Mounting Bracket
Mounting Bracket Hoisting Bracket
Leveling Brackets
Hoisting Bracket
“E” Free Hanging
Viewing Surface
“V” Flexible Vinyl
Viewing Surface
Trim Flange
Shipping Brackets Attached
to Dowel and Screen Case
(V Screens Only)
Please Note: Shipping brackets must remain
in place until product has been mounted and
connected to power
(see Sections 1 and 4 in this
document.)
.
Also, DO NOT operate screen before removing
shipping brackets from screen case.
TOOLS REQUIRED
POW R RILE D L
PENCIL
TAP ASUE E M RE
HAR ARDW E
(b oth rs)y e
L LEVE
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2020 All Rights Reserved | FORM: AccessFit_Inst20
Access FIT E and V
Electric projection screen
INSTRUCTIONS
INSTALLATION & OPERATION
If you have any difficulties installing or servicing your
Access FIT screen, call your dealer or Draper, Inc.
PLEASE READ - Safety Information
WARNING
Improper installation and use of the Access Fit E and V screen can result in serious injury or death. Primarily, injuries can occur if the unit falls due to
imprecise installation, mishandling of the unit during installation, or installation on an insufficient wall or ceiling structure. Please use extreme care.
1.
Please read the following installation guidelines thoroughly and follow them
carefully. Failure to do so may cause product to fall or otherwise fail, and could
result in serious injury.
2.
Installation and calibration of the unit should only be performed by an
authorized, qualified, and experienced professional. In particular, electrical
work and wiring [indicated in diagram by dashed lines] must be completed only
by a qualified professional electrician who has read this manual completely
and is familiar with the construction and operation of this equipment and the
hazards involved.
3.
Do not affix the unit to walls or ceilings that have inadequate strength
to permanently hold the unit during use. It is the owner’s and installer’s
responsibility to confirm the wall or ceiling to which the unit attaches is
sufficient to permanently hold the weight and stress loads of the unit at all
times. Draper, Inc., is not responsible for improper installation, application,
testing, or workmanship related to the product at place of installation.
4.
It is the installer’s responsibility to make sure appropriate fasteners are used
for mounting.
5.
All hardware must be installed level. Unit must be level and square.
6.
Never leave the area while operating the unit during installation, maintenance,
or normal operation, unless it is secure and safe.
7.
Before testing or operation, carefully inspect the entire area and path
(especially
underneath)
of unit to be sure no persons or objects are in the area.
8.
Turn off power and any nearby equipment or cables carrying electricity before
connecting switches, wires, controls, or electrical components.
9.
Do not wire motors in parallel without written permission from Draper, Inc.
10.
During testing or operation, carefully watch the surrounding area for any
potential safety concerns including nearby persons or objects.
11.
After installation, the entire system, including all sensors, should be carefully
tested to ensure safe and normal operation. Extreme care should be taken
during testing to remain clear of moving parts to avoid possible injury.
12.
Operation of unit should be performed only by authorized and qualified
personnel, who have been trained in its safe and effective operation and
understand its safety features.
13.
The safety features of the unit should never be disabled, bypassed, or
overridden. The system should not be operated until all safety features are
properly and completely installed, calibrated, and tested.
14.
Unit may need to comply with local, state, or district rules and regulations, in
particular when installed in schools. All applicable rules and regulations should
be reviewed before installation and use.
15.
Failure to precisely follow installation guidelines invalidates all
warranties.
16.
Custom products/installations may not be reflected in this manual. Call Draper,
Inc., if you have questions about the installation of custom products or any
questions about your installation.
Before Beginning Installation
1.
Look for any job site conditions that could interfere with installation or
operation of the system.
2.
Read carefully and be sure to understand all installation instructions and
all related operations manuals. These instructions are intended to serve
as a guide for the installer and owner. They should be followed closely and
combined with the expertise of experienced qualified installers. Draper, Inc., is
not responsible for improper installation, application, testing, or workmanship
related to the product at place of installation. Please retain all instructions for
future use.
3.
Open cartons lengthwise.
4.
Locate and lay out all pieces.
5.
Inspect all boxes to make sure you have received the proper unit and parts.
Controls may be shipped separately, or in same carton as unit.
6.
If you have any difficulties with installing, servicing, or operating your unit, call
your dealer or Draper, Inc., 765-987-7999.
Important Safety Information Important Safety Information
Remove
fasteners from
bracket clamps.
Run screen
DOWN to expose
dowel screws.
Loosen screws
and remove
shipping bracket.
Retighten
dowel endcap
screws.
1
2
3
4
Section 1 - Removing Shipping Brackets
(Tab-Tensioned, "V" Surfaces only)
CAUTION: DO NOT remove shipping
brackets until product has been
mounted and connected to power
(see
Section 4 in this document.)
.
Also, DO NOT OPERATE SCREEN
BEFORE REMOVING SHIPPING
BRACKETS FROM SCREEN CASE.
page 2 of 8
Access FIT E and V

Produkt Specifikationer

Mærke: Draper
Kategori: Projektionsskærm
Model: Access/V

Har du brug for hjælp?

Hvis du har brug for hjælp til Draper Access/V stil et spørgsmål nedenfor, og andre brugere vil svare dig


Projektionsskærm Draper Manualer

Draper

Draper Access/V Manual

13 Februar 2024
Draper

Draper Access FIT V Manual

14 December 2023
Draper

Draper Onyx Manual

14 December 2023
Draper

Draper FocalPoint Manual

22 November 2023
Draper

Draper 85" Consul 216009 Manual

2 November 2023
Draper

Draper Luma 207006 Manual

20 Oktober 2023
Draper

Draper Ultimate Manual

3 August 2023
Draper

Draper Profile Manual

16 Juli 2023
Draper

Draper Traveller Manual

10 Maj 2023
Draper

Draper Ultimate Access V Manual

9 April 2023

Projektionsskærm Manualer

Nyeste Projektionsskærm Manualer

Epson

Epson ELPSC80 Manual

20 Februar 2025
Elite Screens

Elite Screens SableFrame ER114WX1 Manual

9 Februar 2025
Elite Screens

Elite Screens Evanesce Tension ITE108XW2-E24 Manual

9 Februar 2025
Elite Screens

Elite Screens PicoScreen PC35W Manual

9 Februar 2025
Elite Screens

Elite Screens CineTension2 TE165HW2 Manual

9 Februar 2025
Elite Screens

Elite Screens Kestrel FE100V Manual

9 Februar 2025
Elite Screens

Elite Screens ezFrame R100WV1 Manual

8 Februar 2025
Elite Screens

Elite Screens DIY Pro 133" Manual

7 Februar 2025
AWOL Vision

AWOL Vision ALR-220C Manual

28 Januar 2025
Da-Lite

Da-Lite Model C With CSR Manual

11 August 2024