EC Line EC-3120D-USB Manual

EC Line Etiketprinter EC-3120D-USB

Læs gratis den danske manual til EC Line EC-3120D-USB (3 sider) i kategorien Etiketprinter. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 18 anmeldelser. Har du et spørgsmål om EC Line EC-3120D-USB, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
Installing Windows Printer
Drivers
Contents
Introduction
Step- -By Step Installation (Plug and Play)
Step- -By Step Installation (Manual)
Possible Errors During Driver Installation
Removing Printer Drivers
If You Have Difficulty Printing
Introduction
This document will help you install your Windows printer drivers. Once they are
installed, please refer to the help file included with the driver for answers to the most
commonly asked questions regarding the drivers. The help file also includes a
thorough troubleshooting section.
It is recommended that you install printer drivers using Plug and Play whenever
possible. USB printers may not function correctly unless they are installed using
Plug and Play. If your printer supports this feature, go to Step- -by Step Installation
(Plug and Play).
If you are using a serial or TCP/IP connection, or if your printer does not support
Plug and Play, go to Step- -by Step Installation (Manual).
Step-By-Step Installation (Plug and Play)
1. If your printer supports Plug and Play installation and you are using a USB or
parallel connection, it is recommended that you install the driver using Plug
and Play. Turn off the printer, connect the USB or parallel cable, and then
turn on the printer.
2. Windows should automatically detect the printer, selecting the correct model
and port. When prompted for the driver location, enter the Installation
Directory you specified when extracting the files.
3. Continue with the Add Printer wizard. Select No when asked if you want to
print a test page. The standard Windows test page procedure is designed for
typical office printers, and it does not always print properly on thermal label
printers.
Note:
At some point during installation you may receive a warning that the
driver is not di
g
itall
y
si
g
ned and ma
y
not be compatible with
y
our
Pa
g
e 1 of 3Installin
g
Windows Printer Drivers
16/9/2010file://C:\Sea
g
ull\Installation
_
Instructions.html
operating system. This driver has been tested thoroughly with all
current versions of Windows, and this message may be disregarded.
Step-By-Step Installation (Manual)
1. If your printer does not support Plug and Play, you must launch the Windows
Add Printer wizard manually:
a. Click the Start button.
b. Select Settings.
c. Select Printers. The Printers dialog opens.
d. Double-click Add Printer.
2. On each page of the wizard, answer the questions and press Next. The
pages that appear will vary depending on your version of Windows and how
you answer the questions. Eventually you will reach a page containing a
Have Disk button.
3. Click Have Disk. When prompted for the driver location, enter the
Installation Directory you specified when extracting the files.
4. Continue with the Add Printer wizard. Select No when asked if you want to
print a test page. The standard Windows test page procedure is designed for
typical office printers, and it does not always print properly on thermal label
printers.
Note:
At some point during installation you may receive a warning that the
driver is not digitally signed and may not be compatible with your
operating system. This driver has been tested thoroughly with all
current versions of Windows, and this message may be disregarded.
Possible Errors During Driver Installation
If, during the printer driver installation, there were error messages about a file
already being in use, take these steps:
1. Restart Windows.
2. Close any programs that automatically launched when Windows restarted,
including the Microsoft Office shortcut bar if it opened.
3. Go to Step- -by Step Installation and retry the installation.
Removing Printer Drivers
Many common driver problems are caused by conflicts with older driver files. If you
are experiencing problems after upgrading your printer driver, try removing the old
printer drivers and reinstalling the new driver. Deleting a printer from the printers
folder does not remove all associated files and registry entries from the system. We
provide a utility that will thoroughly clean your system of old printer drivers. To run
this utility, open the Installation Directory and run DriverCleaner.exe.
Page 2 of 3Installing Windows Printer Drivers
16/9/2010file://C:\Sea
g
ull\Installation
_
Instructions.html

Produkt Specifikationer

Mærke: EC Line
Kategori: Etiketprinter
Model: EC-3120D-USB

Har du brug for hjælp?

Hvis du har brug for hjælp til EC Line EC-3120D-USB stil et spørgsmål nedenfor, og andre brugere vil svare dig


Etiketprinter EC Line Manualer

EC Line

EC Line EC-PM-80220 Manual

21 August 2024
EC Line

EC Line EC-80320 Manual

21 August 2024
EC Line

EC Line EC-SIC-80220 Manual

21 August 2024
EC Line

EC Line EC-3120D-USB Manual

20 August 2024
EC Line

EC Line EC-PM-80320 Manual

20 August 2024
EC Line

EC Line EC-3150D-USB Manual

19 August 2024

Etiketprinter Manualer

Nyeste Etiketprinter Manualer

Godex

Godex RT700 Manual

13 September 2025
Godex

Godex EZ6200Plus Manual

12 September 2025
Argox

Argox CP-2140 Manual

12 September 2025
Godex

Godex G500 Manual

12 September 2025
Godex

Godex MX30 Manual

12 September 2025
Godex

Godex EZ6300Plus Manual

12 September 2025
Godex

Godex ZX1300i Manual

12 September 2025
Argox

Argox A-2240 Manual

12 September 2025
Godex

Godex G530 Manual

12 September 2025
Argox

Argox OS-2130DE Manual

12 September 2025