Edelkrone HeadONE Manual


Læs gratis den danske manual til Edelkrone HeadONE (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Edelkrone HeadONE, eller vil du spørge andre brugere om produktet?

Side 1/2
1.
2.
3.
4.
5.
6.
7.
8.
LANC port
3/8”-16 to 1/4"-20 reducer bushing**
3/8”-16 mounting port
1/4”-20 mounting port
HeadONE
3/8”-16 mounting screw
Built in LP-E6 battery bracket
Shutter trigger port
3
2
1
8
6
7
3
2
1
TABLE OF CONTENTS
WHAT’S IN THE BOX & THE BASICS
3/8” REDUCER BUSHING & 1/4” POP UP MOUNTING SCREW
MOUNTING (CAMERA-TRIPOD-FLEXTILT HEAD 2)
USING WITH FLEXTILT HEAD 2
START USING
1.
2.
3.
4.
5.
1. WHAT’S IN THE BOX & THE BASICS
3. MOUNTING (CAMERA-TRIPOD-FLEXTILT HEAD 2)
4
5
2. 3/8” REDUCER BUSHING & 1/4” POP UP MOUNTING SCREW
1. Attach your HeadONE on your tripod
by rotating it clockwise.
2. Attach your FlexTILT Head 2 on your
HeadONE by rotating it clockwise.
3. Attach your camera on your FlexTILT Head 2
or on your tripod head.
A detailed video explaining the mounting process can be found at:
http://edel.kr/ho
**Reducer busing (6) is mounted on the 3/8”-16 mounting port (7)
Dettach the 3/8”-16 Reducer bushing
by turning it counter clockwise.
HeadONE has 3/8”-16 screw hidden
inside for your tripod head. You can
access this screw with the help of a coin.
Turn the screw using a coin until it
pops out. To hide the screw back in its
place, just press it down and turn it
counter clockwise.


Produkt Specifikationer

Mærke: Edelkrone
Kategori: Ikke kategoriseret
Model: HeadONE

Har du brug for hjælp?

Hvis du har brug for hjælp til Edelkrone HeadONE stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Edelkrone Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer