ELAC Protek PB-62S Manual

ELAC Ikke kategoriseret Protek PB-62S

Læs gratis den danske manual til ELAC Protek PB-62S (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om ELAC Protek PB-62S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

PB62-S 6 Outlet Surge Protector with USB Setup Guide

① Dual USB Charging Ports: 5V 2.4 Amp Total USB-A ports for charging compatible devices

② PROTECTED LED—If illuminated, the unit is working properly. If not illuminated your connected

equipment is not being protected. Contact ELAC Customer Support

③ AC Outlets—Plug Equipment directly into these outlets. Do not use an extension cord, UPS, or

power strip.

①

③

②

PRODUCT FEATURES

USING YOUR SURGE PROTECTOR

1. Ensure the power is o on the devices you will connecting to the AC outlets on the surge protector.

2. Plug the surge protector into a properly grounded AC wall outlet.

3. Check that the PROTECTED blue LED light is illuminated. (If not the surge protector is not operating properly and will not

protect your connected devices).

4. Plug your equipment into the outlets on the surge protector and power on your devices as usual.

5. USB devices can be charged/powered by simply connecting the USB power cord to USB ports on the surge protector. The

USB ports deliver 5V and up to 2.4amps of power.

• RISK OF ELECTRIC SHOCK – Use only in dry locations and only

indoors.

• DO NOT plug into another relocatable power tap.

• DO NOT “daisy chain” surge protectors.

• DO NOT plug into 220V outlet or power source

• DO NOT use with any aquarium equipment.

• DO NOT connect to an ungrounded outlet

• DO NOT install this device if there is not at least 30 feet (10 meters),

or more of wire between the electrical outlet and electrical service

panel.

• This device features internal protection that will disconnect the

surge protective component at the end of its useful life

(PROTECTED LED WILL TURN OFF) , but will maintain power to

outlet – WHICH WILL BE UNPROTECTED

WHICH WILL BE UNPROTECTED

WHICH WILL BE UNPROTECTEDWHICH WILL BE UNPROTECTED. If you don’t want your

equipment at risk, the surge protector will need to be replaced.

• DO NOT use in any circumstance that would aect the operation or

reliability of life support equipment, any medical applications, or

patient care.

SAFETY INFORMATION TECHNICAL SPECIFICATIONS

Number of Outlets 6

Number of USB Ports 2—5V total 2.4A

AC Outlets All 6 ﬁltered with surge protection

Protection Modes L-N, L-G, N-G

Thermal Fuse Yes

Maximum Current 15 Amps

Line Voltage 120V @ 60Hz

Certiﬁcation UL 1449, UL 498A, FCC, ICES

Max Energy Dissipation 540 Joules

Max Spike Voltage / Current 6,000V / 36,000A

Response Time 1 Nanosecond

Filtration EMI / RFI 40dB

ELAC A

ELAC AELAC AMERICAS I

MERICAS I

MERICAS IMERICAS INC.

NC.

NC. NC.

1938 N. BATAVIA ST. SUITE K

1938 N. BATAVIA ST. SUITE K 1938 N. BATAVIA ST. SUITE K

ORANGE, CA 92865

ORANGE, CA 92865 ORANGE, CA 92865

LIMITED LIFETIME WARRANTY

ELAC Americas Inc. warrants to the original purchaser that this product be free from defects and or workmanship for lifetime of this product from

the original date of purchase. During this time period, repair or replacement will be free of charge to the original owner (See below limitations).

Shipping to and return from the repair center will be the responsibility of the original purchaser.

Limitations

LimitationsLimitations

• Warranty begins on the date of original purchase from an authorized ELAC Americas Inc. dealer. Products purchased from an unauthorized

reseller will not be honored.

• Product is warranted only if used in home applications within the rated speciﬁcations of this product. Commercial use of this product is not

warranted.

• Product that has been modiﬁed or altered in anyway will not be warranted.

• Product that has been abused or subjected to faulty equipment will not be warranted.

• Products with defaced or removed serial numbers will not be warranted.

If service is required

If service is requiredIf service is required

In the event that service is required, please contact ELAC America at 714-252-8843 or at customerservice@elac.us to request a return

authorization and to arrange for service or serviced or replaced is at ELAC’s discreti replacement. Whether the product will be on. You will be

responsible to provide proof of purchase (Copy or original sales receipt). Shipping to and from our repair center will be the responsibility of the

original purchaser.

CAUTIONS!

This surge protector is designed to protect your electronic equipment from AC power surges up to its rated speciﬁcations only. If an electrical

surge above the rated speciﬁcations of this surge protector enter this device, connected devices may not be protected. Please understand that

electrical surges can enter electronics devices through any interconnected conductive connections. These interconnections can include coax

lines, phone lines, ethernet lines, AV connections and any other conductive material.

ELAC A

ELAC AELAC AMERICAS IN

MERICAS IN

MERICAS INMERICAS INC.

C. C.

1938 N. BATAVIA ST. SUITE K

1938 N. BATAVIA ST. SUITE K 1938 N. BATAVIA ST. SUITE K

ORANGE, CA 92865

ORANGE, CA 92865 ORANGE, CA 92865

FEDERAL COMMUNICATIONS COMMISSION

INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

To assure continued FCC compliance:

Any changes or modiﬁcations not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

FCC ID & IC Statements

To assure continued FCC compliance:

1. Any changes or modiﬁcations not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator and your body.