ELAC Protek PR-71S Manual

ELAC Ikke kategoriseret Protek PR-71S

Læs gratis den danske manual til ELAC Protek PR-71S (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om ELAC Protek PR-71S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PR71-S 8-Outlet Component Surge Protector Setup Guide

PRODUCT FEATURES

USING YOUR SURGE PROTECTOR

1. Ensure the power is o on the devices you will be connecting to the AC outlets on the surge protector.

2. Plug the surge protector into a properly grounded AC wall outlet and turn on the surge protector.

3. Check that the PROTECTED and GROUNDED blue LEDs are illuminated. If the PROTECTED LED is not illuminated, the surge

protector is not operating properly and will not protect your connected devices. If the GROUNDED LED is not illuminated the

outlet the surge protector is connected to is not properly grounded and should not be used. Please have a licensed

electrician diagnose and troubleshoot the aected wall outlet prior to use.

4. Plug your equipment into the outlets on the surge protector and power on your devices as usual.

5. USB devices can be charged/powered by simply connecting the USB power cord to the USB ports on the surge protector.

The USB ports deliver 5V and up to 2.4amps of power.

⑤

④ ⑥ ⑦ ⑧

⑨ ⑩ ⑪

ELAC A

ELAC AELAC AMERICAS I

MERICAS I

MERICAS IMERICAS INC.

NC.

NC. NC.

1938 N. BATAVIA ST. SUITE K

1938 N. BATAVIA ST. SUITE K 1938 N. BATAVIA ST. SUITE K

ORANGE, CA 92865

ORANGE, CA 92865 ORANGE, CA 92865

① Power Button—Press this button (.5 sec to 1 sec) to power on and

o the rear AC outlets. Press and hold for 10 seconds to factory reset

the unit.

② Reboot Button—Pressing and holding the REBOOT button for 1.5

seconds will power cycle all outlets in Group 1.

③ Dimmer Button—Adjusts the brightness of the LCD and other

LEDs to 10%, 35%, 70% and 100%.

④ Voltage Display—Displays the Voltage of the outlet that the surge

protector is plugged into.

⑤ LED Indicators— Indicates the status of the surge protector.

• Protected / Clean Power

Protected / Clean Power

Protected / Clean PowerProtected / Clean Power—LED On: Outlets are Protected. LED

O: Surge Protection is not working and your connected devices

are not protected.

• Ground OK

Ground OK

Ground OKGround OK—LED On: The wall outlet is properly grounded. LED

O: The wall outlet is NOT properly grounded and a licensed

electrician should be called to resolve the problem.

• Reversed Polarity

Reversed Polarity

Reversed PolarityReversed Polarity—LED O: The wall outlet polarity is correct.

LED On: Reverse polarity detected. Please contact a licensed

electrician to resolve the issue.

• Unsafe Voltage

Unsafe Voltage

Unsafe VoltageUnsafe Voltage—LED O: Normal voltage detected. LED On:

Unsafe voltage detected and the surge protector will disconnect

power to your connected devices. Please consult a licensed

electrician.

⑥ Front AC Outlet—This front AC outlet always on unless unsafe

voltage is detected.

⑦ Front Outlet Indicator—Front AC outlet power indicator.

⑧ Dual USB Charging Ports: 5V 2.4 Amp Total USB-A ports for

charging compatible devices.

⑨ Group 2 AC Outlets— These 5 outlets provide 58db of EMI/RFI

ﬁltration and are perfect for source and lower current devices.

⑩ Group 1 AC Outlets—These 2 outlets are designed for high current

devices such as audio ampliﬁers.

⑪ Overload Breaker—This breaker will trip when the surge protector

is overloaded. After resetting, please ensure the Protected/Clean

Power LED is On, if not, your surge protector needs to be replaced.

• RISK OF ELECTRIC SHOCK – Use only in dry locations and only

indoors.

• DO NOT plug into another relocatable power tap.

• DO NOT “daisy chain” surge protectors.

• DO NOT plug into 220V outlet or power source.

• DO NOT use with any aquarium equipment.

• DO NOT connect to an ungrounded outlet.

• DO NOT install this device if there is not at least 30 feet (10 meters),

or more of wire between the electrical outlet and electrical service

panel.

• This device features internal protection that will disconnect the

surge protective component at the end of its useful life

(PROTECTED LED WILL TURN OFF) , but will maintain power to the

outlet – WHICH WILL BE UNPROTECTED. If you don’t want your

equipment at risk, follow the manufacturer’s instructions for replac-

ing the device.

• DO NOT use in any circumstance that would aect the operation or

reliability of life support equipment, any medical applications, or

patient care.

SAFETY INFORMATION TECHNICAL SPECIFICATIONS

Number of AC Outlets 8

Number of USB Ports 2—5V total 2.4A

AC Outlets All 8 ﬁltered with surge protection

Protection Modes L-N, L-G, N-G, Surge

Thermal Fuse Yes

Maximum Current 15 Amps

Line Voltage 120V @ 60Hz

Certiﬁcation UL 1449, UL 1363, FCC, ICES

Max Energy Dissipation 2160 Joules

Max Spike Voltage / Current 6,000V / 144,000A

Response Time 1 Nanosecond

Filtration EMI / RFI G1: 40dB G2: 58dB

Over/Under Voltage Protection Over 135Vac / Under 95Vac

ELAC A

ELAC AELAC AMERICAS I

MERICAS I

MERICAS IMERICAS INC.

NC.

NC. NC.

1938 N. BATAVIA ST. SUITE K

1938 N. BATAVIA ST. SUITE K 1938 N. BATAVIA ST. SUITE K

ORANGE, CA 92865

ORANGE, CA 92865 ORANGE, CA 92865

CAUTIONS!

This surge protector is designed to protect your electronic equipment from AC power surges up to its rated speciﬁcations only. If an electrical

surge above the rated speciﬁcations of this surge protector enter this device, connected devices may not be protected. Please understand that

electrical surges can enter electronics devices through any interconnected conductive connections. These interconnections can include coax

lines, phone lines, ethernet lines, AV connections and any other conductive material.

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

To assure continued FCC compliance:

Any changes or modiﬁcations not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

FCC ID & IC Statements

To assure continued FCC compliance:

1. Any changes or modiﬁcations not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed

and operated with minimum distance 20cm between the radiator & your body.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any interference, including interference peration of the that may cause undesired o

device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator and your body.

Produkt Specifikationer

Mærke:	ELAC
Kategori:	Ikke kategoriseret
Model:	Protek PR-71S

Har du brug for hjælp?

Hvis du har brug for hjælp til ELAC Protek PR-71S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret ELAC Manualer

ELAC Muro OD-M61 Manual

18 Marts 2025

ELAC Muro OD-M81 Manual

18 Marts 2025

ELAC Protek 8 Outlet PB-82S Manual

6 Oktober 2024

ELAC Protek 3 Outlet PB-30S Manual

1 Oktober 2024

ELAC HDX21 Manual

6 September 2024

ELAC Protek PR-71S Manual

1 September 2024

ELAC PB12-W Manual

1 September 2024

ELAC Protek PR-81B Manual

1 September 2024

ELAC LS10 Manual

5 August 2024

ELAC Protek PB-62S Manual

5 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025