Electro Harmonix Anniversary Big Muff Pi Manual

Electro Harmonix Ikke kategoriseret Anniversary Big Muff Pi

Læs gratis den danske manual til Electro Harmonix Anniversary Big Muff Pi (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Electro Harmonix Anniversary Big Muff Pi, eller vil du spørge andre brugere om produktet?

Side 1/2
DOUBLE ANNIVERSARY BIG MUFF PI
Congratulations on your purchase of the DOUBLE ANNIVERSARY ELECTRO-
HARMONIX BIG MUFF PI fuzz pedal! This commemorative Muff is inspired by
the rich history of the Big Muff Pi and Electro-Harmonix, with design elements that
pay homage to the many faces of the Big Muff Pi. The Double Anniversary Big Muff
Pi’s limited-edition, laser-etched, golden chassis you now hold in your hands
houses the sweet singing sustain of our most coveted violet Ram’s Head circuit.
CONTROLS AND CONNECTIONS
VOLUME Knob Sets the output level.
TONE Knob Provides a range of sounds from high treble to deep bass. As you
turn the knob clockwise the treble increases and bass decreases.
SUSTAIN Knob Adjusts the amount of sustain and distortion.
Footswitch & Status LED Use the footswitch to toggle between effect and
bypass. The device is active when the LED is lit. When the LED is off, the pedal is
in true bypass.
INPUT Jack Plug the output of your instrument or another effects pedal into
the ¼” INPUT jack. The input impedance presented at this jack is 117kΩ.
AMPLIFIER Jack Connect the device’s ¼” AMPLIFIER jack to the input of your
amplifier or another effects pedal. When the device is in bypass, the AMPLIFIER
jack is connected directly to the IN jack. The output impedance is 25kΩ.
POWER
The Double Anniversary Big Muff Pi is powered from a 9V battery or you can use
an optional 9VDC AC Adapter capable of delivering at least 25mA. We recommend
the EHX 9.6DC-200 AC Adapter. The AC Adapter must have a center negative plug
that fits a 2.1mm center pin. The pedal has a current draw of approximately 12mA
at 9VDC. The external power supply should not exceed 14VDC.
Please Note: Using the wrong adapter or a plug with the wrong polarity
may damage your device and void the warranty.
Changing the Battery To change the 9V battery, remove the center screw on
the bottom of the device. Take off the battery plate and change the battery.
Avoid touching the circuit board while the battery plate is off. Replace the
battery plate and screw.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: Anniversary Big Muff Pi

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix Anniversary Big Muff Pi stil et spørgsmål nedenfor, og andre brugere vil svare dig