Electro Harmonix String 9 Manual


Læs gratis den danske manual til Electro Harmonix String 9 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 143 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 72 anmeldelser. Har du et spørgsmål om Electro Harmonix String 9, eller vil du spørge andre brugere om produktet?

Side 1/9
WARNING: This device comes equipped with an Electro-Harmonix 9.6DC-200mA power
supply. It requires at 9VDC with a center negative plug. Use of the wrong adapter 100mA
or a plug with the wrong polarity may damage the device and void the warranty. Do not
exceed 10.5VDC on the power plug. Power supplies rated for less than 100mA will cause
the device to act unreliably.
Operating Instructions
Connect the supplied power adapter to the 9V power jack. Plug your instru-
ment into the INPUT jack. Connect your amp or mixer to the EFFECT OUTPUT
jack. Set the DRY knob to minimum (fully counterclockwise) and set the other
top row knobs to 12 o’clock. Select a preset (“SYMPHONIC” is a good starting
point) and step on the footswitch to turn on the LED. Play your instrument
and adjust controls to your liking.
For further inspiration, check out the STRING9’s Suggested Factory Settings
section. To download a blank User Settings PDF to record your favorite set-
tings, visit www.ehx.com/string9.
Congratulations on your purchase of the Electro-Harmonix STRING9 String
Ensemble. The STRING9 does for lush strings what the B9 does for organs, the
KEY9 does for electric pianos and the SYNTH9 does for analog synthesizers: now
anyone with an electric guitar can play great sounding lead string lines and
chordal string pads. The STRING9 is so amazing at producing atmospheric pads,
we took our groundbreaking Freeze algorithm from the HOG and Superego
and included it in three of the STRING9’s patches. Like our entire line of 9
series synthesizers, no special pickups are needed for clear polyphonic tracking
from single notes to full chords. Grab your favorite electric guitar and a
STRING9 and turn yourself into a string ensemble virtuoso.
1. DRY VOL Knob The DRY VOL knob controls the volume of the untreated
instrument signal present at the EFFECT OUTPUT jack. The DRY knob does not
control the volume of the DRY OUTPUT jack.
2. EFFECT VOL Knob The EFFECT VOL knob controls the overall volume of the
selected patch at the EFFECT OUTPUT jack.
3. CTRL 1 and CTRL 2 Knobs See the preset descriptions on page 4.
4. PATCH Knob Turn the white knob to select a strings patch.
5. BYPASS MUTE Internal DIP Switch Inside the STRING9 is a small DIP switch
labeled dry/mute. This switch allows you to choose the signal output from the
EFFECT jack when the STRING9 is in bypass mode.
While the STRING9 is in Bypass, and the DIP switch is set to (factory dry
default), the EFFECT jack outputs the signal present at the INPUT. This is the
standard guitar pedal routing for bypass. Set the DIP switch to mute, and
- 2 -
Controls and Connections


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: String 9

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix String 9 stil et spørgsmål nedenfor, og andre brugere vil svare dig