
Capacity: 27 000 mAh (99.9 Wh)
Accumulator type: Li-Ion 3.7 V
Max. input power: 5 V/3 A; 9 V/3 A; 12 V/3 A; 15 V/3 A; 20 V/5 A
USB-C1 100 W: 5 V/3 A; 9 V/3 A; 12 V/3 A; 15 V/3 A;
USB-A: 5 V/4,5 A (SCP); 9 V/2 A; 12 V/1,5 A
USB-C2 27 W: 5 V/3 A; 9 V/3 A; 12 V/2,25 A – PD 27 W
USB-C1 + USB-C2: PD 127 W max.
USB-C1 + USB-A: PD 100 W + QC 3.0 – 18 W = 118 W max.
PD 100 W + 15 W (5 V/3 A) = 115 W max.
Dimensions: 190 × 74 × 27 mm
Operating temperature: +5 °C ~ 40 °C
Charging time: 2–2.5 hours (approximately)*
* The above charging time may dier depending on ambient
* USB power adapter not included.
* Valid when using a USB adapter or power supply providing max.
input current (PD 100 W).
** When using both USB outlets at the same time, max. output
of the power bank is only 5 V/3 A.
Do not charge the powerbank before rst use. When rst used
allow the power bank to fully discharge. After that, charge the
powerbank fully. Repeat this procedure for the rst 3–5 charge
Power bank battery status indicator:
• To determine the state of charge of the powerbank’s battery,
press the button on the side of the power bank.
• Once the button is pressed, the LED screen will display the
current remaining capacity of the powerbank in %.
• While a connected device is charging, the % goes down and
• While the power bank is charging, the screen is also lit up
To achieve the maximum power of 100 W through the USB port,
use the original cable for the phone or a suitable USB cable.
To extend the life of the power bank’s battery, keep the battery
charged to 25–75 % if possible.
Supported devices: tablets, mobile phones, cameras, camcord-
ers, MP3 players, GPS navigation, soundboxes. The power bank
does not support low-power devices such as headphones and