Ensemble Designs BrightEye 11-HD Manual

Ensemble Designs Ikke kategoriseret BrightEye 11-HD

Læs gratis den danske manual til Ensemble Designs BrightEye 11-HD (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Ensemble Designs BrightEye 11-HD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

This user guide provides detailed information for using the BrightEye™11-HD

HD/SD SDI to Analog Converter module.

The information is organized into the following sections:

• Product Overview

• Functional Description

• Rear Connectors

• Operation

• Front Panel Controls and Indicators

• Using the BrightEye Control Application

• Warranty and Factory Service

• Specifications

• Glossary

BrightEye-1

BrightEye 11-HD

HD/SD SDI to Analog

Converter

Revision 2.0 SW v1.0

ENSEMBLE

DESIGNS

BrightEye 11-HD HD/SD SDI to Analog Converter

PRODUCT OVERVIEW

BrightEye 11-HD provides HD or SD digital to analog video conversion with the

full range of analog output formats available for HD and SD. When an HD input

is present, HD RGB or YPrPb are output. When an SD input is present, Beta,

SMPTE, RGB, or composite with simultaneous Y/C is put.

12 bit processing and conversion at 8x oversampling produce the best looking

images possible. Output format and gain are controlled from the front panel. A

status display indicates input presence. Video levels can be adjusted through

BrightEye Mac or PC software.

FUNCTIONAL DESCRIPTION

As shown in the functional block diagram below, serial digital video is fed to the

converter on a single BNC connector. The SDI input is routed directly to the SDI

Out BNC and the reclocking and deserializing circuitry before entering the D to A

converter.

The converted analog signal is then encoded to the desired output format as

chosen on the front panel or with BrightEye PC. During this stage, gain can be

adjusted for the correct output levels.

BrightEye 11-HD is powered by a 12 volt DC universal power supply. This power

supply can accept an input voltage between 90 and 230 volts, at 50 or 60 Hertz. It

uses a standard IEC line cord and can be used anywhere in the world. It is

normal for the converter to be quite warm to the touch when operating.

BrightEye-2

HD or SD

SDI In

Y, Pb, B Out

Reclocker

Deserializer

12-bit

D to A

Converter

and

Video Encoder

HD SDI In Yields HD Analog Out.

SD SDI In Yields SD Analog Out.

C, Pr, R Out

Cpst, Y, G Out

SDI Out

Front Panel Controls

Gain Adjust

BrightEye 11-HD Functional Block Diagram

Produkt Specifikationer

Mærke:	Ensemble Designs
Kategori:	Ikke kategoriseret
Model:	BrightEye 11-HD

Har du brug for hjælp?

Hvis du har brug for hjælp til Ensemble Designs BrightEye 11-HD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ensemble Designs Manualer

Ensemble Designs BrightEye 16 Manual

27 September 2025

Ensemble Designs BrightEye 70 Manual

27 September 2025

Ensemble Designs BrightEye 20 Manual

27 September 2025

Ensemble Designs BrightEye 72 Manual

27 September 2025

Ensemble Designs BrightEye 83-F Manual

20 Juni 2025

Ensemble Designs BrightEye 10 Manual

20 Juni 2025

Ensemble Designs BrightEye 90-A Manual

20 Juni 2025

Ensemble Designs BrightEye 2 Manual

19 Juni 2025

Ensemble Designs BrightEye 90-FA Manual

19 Juni 2025

Ensemble Designs BrightEye 46 Manual

19 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

10 Oktober 2025

10 Oktober 2025

10 Oktober 2025

10 Oktober 2025

Oras Saga 3970 Manual

10 Oktober 2025

TOA AT-4030B-EB Manual

10 Oktober 2025

TOA VX-030DA Manual

10 Oktober 2025

TOA RS-481 Manual

10 Oktober 2025

TOA AT-4200B-EB Manual

10 Oktober 2025

Xerox DocuShare Manual

10 Oktober 2025