Ensemble Designs BrightEye 90-FA Manual

Ensemble Designs Ikke kategoriseret BrightEye 90-FA

Læs gratis den danske manual til Ensemble Designs BrightEye 90-FA (41 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Ensemble Designs BrightEye 90-FA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/41
BrightEye 90-FA - Page 1
This user guide provides detailed information for using the BrightEye 90-FA
HD up/down/cross converter and aspect ratio converter (ARC) with analog audio
and optical output.
The information is organized into the following sections:
• Product Overview
• Functional Description
• Applications
• Rear Connectors
• Operation
• Front Panel Controls and Indicators
• Using The BrightEye Control Application
• Warranty and Factory Service
• Specifications
• Glossary
TM
BrightEye 90-FA
HD Up/Down/Cross Converter
and ARC with Analog Audio
and Optical Output
User Guide
Revision 2.4 SW v1.2.3
BrightEye 90-FA HD Up/Down/Cross Converter and ARC with Analog Audio and Optical Output
BrightEye 90-FA - Page 2
PRODUCT OVERVIEW
BrightEye 90-FA upconverts standard definition (SD) signals into high definition
(HD), downconverts HD signals into SD, cross converts between a variety of HD
standards, and performs format and aspect ratio conversion (ARC). The built-in
frame synchronizer handles any asynchronous signals fed to the unit.
BrightEye 90-FA auto-senses the input format and determines if it should up,
down, or cross convert, based on the user’s selection of output format. The user
only needs to select the preferred output format. BrightEye 90-FA will then accept
any video input and perform the proper video conversion as needed.
As video is processed, audio is processed too, since the BrightEye 90-FA
accommodates both embedded audio and analog audio streams. Up to sixteen
channels of embedded audio are supported. Audio mixing is available for two of
the four embedded audio groups. The analog audio ports can be configured for
eight channels of audio input, eight channels of audio output, or four in/four out.
The rear-panel HDMI output connector is compatible with many LCD monitors
and allows confidence monitoring of signal feeds.
Basic controls are accessed on the front panel. BrightEye PC and BrightEye Mac
Control applications provide access to video processing functions, input and
output, and audio mixer controls that are not available from the front panel.
FUNCTIONAL DESCRIPTION
As shown in the diagram that follows, when a high definition or standard definition
serial digital video input is fed to the BrightEye 90-FA, the signal enters the serial
digital receiver and is frame synchronized to the reference input. Audio is disembedded
and passed around the video processing.
Alternately, when analog composite video is fed to BrightEye 90-FA, the analog
video is converted at 14 bits of resolution to digital YCrCb components (601). The
signal is frame synchronized to the reference input then fed to the upconverter.
Processing for upconversion, downconversion, dross conversion and aspect ratio
conversion is done at 12 and 16 bits. Aspect ratio of the video output is selectable
between Anamorphic, Pillar Box, Letter Box, or Crop. It can also be set manually
if desired.
External audio can be inserted into the SDI stream or replace existing embedded
audio. There are four analog audio Phoenix connectors that can be used for input
or output. There are 3 ways to configure the audio ports: Mux 8 where all
connectors are configured as 8 input channels, Mux 4 where there are 4 input
channels and 4 outputs channels, and Demux 8 where the all connectors are
configured as 8 output channels. Audio level adjustment and channel mixing is
provided.
All 16 channels of audio are passed through. Audio is passed around the video
processing in order to preserve lip sync. Audio is embedded into the video stream
prior to output. Of the sixteen channels of audio, you can select one pair to
monitor through the Audio Monitor headphone jack by making a selection from
the Mon Assign control on the Audio Out menu.
The HDMI output provides confidence monitoring of the same signal that is on
the two SDI outputs. When SD SDI is present on the SDI outputs, composite
video will be present on the composite output BNC.

Produkt Specifikationer

Mærke: Ensemble Designs
Kategori: Ikke kategoriseret
Model: BrightEye 90-FA

Har du brug for hjælp?

Hvis du har brug for hjælp til Ensemble Designs BrightEye 90-FA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Ensemble Designs Manualer

Ensemble Designs

Ensemble Designs BrightEye 90-FA Manual

19 Juni 2025
Ensemble Designs

Ensemble Designs BrightEye 46 Manual

19 Juni 2025
Ensemble Designs

Ensemble Designs BrightEye 11-HD Manual

19 Juni 2025
Ensemble Designs

Ensemble Designs BrightEye 90-F Manual

19 Juni 2025
Ensemble Designs

Ensemble Designs BrightEye 30 Manual

19 Juni 2025
Ensemble Designs

Ensemble Designs BrightEye 25 Manual

19 Juni 2025
Ensemble Designs

Ensemble Designs BrightEye 76 Manual

18 Juni 2025
Ensemble Designs

Ensemble Designs BrightEye 11 Manual

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rane

Rane THX 22 Manual

19 Juni 2025
Icom

Icom LC-192 Manual

19 Juni 2025
Parkside

Parkside PDUW 280 A1 Manual

19 Juni 2025
Curtis

Curtis 840 Manual

19 Juni 2025
Physa

Physa PHY-TW-02 Manual

19 Juni 2025
Spectrasonics

Spectrasonics Trilian Manual

19 Juni 2025
Ridgid

Ridgid RST100 Manual

19 Juni 2025
Chapin

Chapin 97761E Manual

19 Juni 2025
Fiamma

Fiamma Compass Manual

19 Juni 2025
Fiamma

Fiamma A20 Manual

19 Juni 2025