Erica Synths Black VCO Manual


Læs gratis den danske manual til Erica Synths Black VCO (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Erica Synths Black VCO, eller vil du spørge andre brugere om produktet?

Side 1/3
TUNE
PULSE WIDTH
FM LEVEL
BLACK VCO
SINE TRI SAW PULSE SUB
SYNC PWM
1V/OCT FM IN
OCTAVE
0+1
+2
-1
-2
THANK YOU FOR PURCHASING ERICA
SYNTHS BLACK SERIES MODULE!
Erica Black Series include high-end, unique
functionality and superior quality modules.
Only the best, highest quality components
are used, all inputs and outputs are
protected against undesired overvoltage.
Erica Black series consist of range of
modules that are needed to put together
entire synth. Enjoy!
Erica Black VCO is analogue VCO with four
simultaneous waveform outputs and one
octave down suboscillator. The core of the
VCO is borrowed from famous Russian synth
Polivoks VCO and in exponential converter
we use the original matched transistor IC
that was used in Polivoks. Unlike harsh logic
divider based suboscillators, Black VCO
transistor-based suboscillator generates
distinct, rounded squarewave. Together with
Black VCO Expander – waveform mixer you
get massive analogue sound source with
plenty of patch points for modular use.
FEATURES:
Simultaneous sine, triangle, saw and pulse
wave outputs
-1 octave suboscillator
Manually adjustable and CV controlled
pulse width
Great tracking across 8 octaves
Exponential FM input with attenuator
Synchronization input
Octave switch – 5 octaves
Ski-friendly design
TECHNICAL SPECIFICATIONS:
CV level -10V - +10V ............................................
Audio output amplitude .......................10Vptp
Octave range C0 – C8 .....................................
Panel width ...............................................12HP
Module depth 35mm .......................................
Power consumption .........................................
................................40mA@+12V, 36mA@-12V
Power consumption w. Expander ..................
................................55mA@+12V, 40mA@-12V
Use Octave switch to tune
the VCO up or down by
octaves instantly
This is VCO Sync input. Patch
another VCO output here to reset
VCO circle. This gives you new,
interesting waveforms
Patch PWM CV source here!
10Vptp CV signal aects
pulse width form 1% to 99%
Patch 1V/oct CV source
here. The VCO tracks well
across 8 octaves
Patch FM CV source here
for vibrato eects! Or try
it out with another VCO
or noise source and get
interesting new timbres!
The TUNE knob allows you
to set the tune of the VCO
across two octaves
These are VCO outputs.
All four waves and
suboscillator are available
simultaneously
This is FM CV attenuator
Adjust pulse width
manually!
BLACK VCO AND VCO EXPANDER
SUB LVL
SUB COLOURSUB MIX
-1 OCT-2 OCT
-2 OCT
OUT
SUBMIX
OUT OUT
BLACK VCO EXPANDER
SINE/TRI LVL SAW LVL
PULSE LVL
SINE
TRI
Erica Black VCO Expander essentially is
advanced waveform mixer plus two octaves
down suboscillator, and it allows you to
explore wave design in brand new areas.
NB! This is expander module that can be
connected only to Black VCO. It will not work
as standalone eurorack module.
FEATURES:
Waveform mixer/inverter
Sine/Triangle/”Tits” waveform switch
Transistor-based -2 octave suboscillator
-1 and -2 octave suboscillator crossfade
Suboscillator lowpass filter
Diode limiter on output signal amplitude
Three simultaneous outputs
Use ribbon cable supplied with the module
to connect it to the Black VCO!
This knob sets direct or
inverted sawtooth waveform
level
Turn this knob CW to
increase suboscillator
level! This knob is assigned
to filtered -1/-2octaves
suboscillator mix
This is suboscillator mix
lowpass filter cuto
frequency knob. In full CW
setting no filtering is applied,
in full CCW setting you have
almost sinewave at very low
frequencies
This is suboscillator
mix output – filtered
suboscillator waves are
present here
This is master mix output
all waveforms are present
here
Turn this konb CW to
set sine/triangle/”tits”
waveform level. Turn this
knob CCW to set inverted
waveform level
This knob sets direct or
inverted pulse wave level.
Apply VCO PWM CV and
get cool waveshaping on
the main output
Use this knob to fade
between -1 and -2 octaves
suboscillators
Use this three position
switch to select, which
waveform is routed to
the top left mixer knob!
Top position is sinewave,
bottom position is triangle,
and mid position give you
distinct “tits” waveform
present in some FM synths
This dedicated -2 octaves
suboscillator output
BLACK VCO AND VCO EXPANDER


Produkt Specifikationer

Mærke: Erica Synths
Kategori: Ikke kategoriseret
Model: Black VCO

Har du brug for hjælp?

Hvis du har brug for hjælp til Erica Synths Black VCO stil et spørgsmål nedenfor, og andre brugere vil svare dig