Erica Synths Fusionbox Manual

Erica Synths Ikke kategoriseret Fusionbox

Læs gratis den danske manual til Erica Synths Fusionbox (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Erica Synths Fusionbox, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Thank you for ordering erica SynThS fuSionbox!

Erica Synths Fusionbox is distinct multifunctional analogue eects unit that combines BBD chip based

eects – delay, anger, chorus – with an adjustable tube overdrive in the delay output and feedback path

for extra thickness of sound. For more exibility, lowpass ltering is fully adjustable from none to extreme

for really deep bass sound. Special feature, not found in other contemporary stompboxes or eect units, is

Vintage Stereo Ensemble.

Vintage Stereo Ensemble provides the classic “stereo ensemble” eect, found on many vintage synthesizers from almost any brand

and make. In stereo ensemble eect, the delayed, processed and ltered sound is added back to the dry (mono) audio with inverted

phase for one channel, and direct phase in other. This gives it the distinct and unique moving character, dierent than that obtained

with chorus eects. However, use of inverted phase in stereo eld also adds certain peculiarities to watch out for. For example,

when such stereo audio is played back on an older “surround” decoding sound system, ensemble eect sound may move to the

rear sound channel. Also, if the output gets mixed back to mono, the eect may disappear. This also applies to mono subwoofer

systems, or speakers that are placed too close. This is normal, and occurs with any similar vintage stereo ensemble processing. In

case if such oddities are undesirable, to avoid mono mixing issues, you can choose to use only one of the output channels, or use

two separate ensemble processors for le and right channels.

Fusionbox has adjustable input gain, therefore it works with various sound sources – guitars, units with line level signals

(synthesizers, grooveboxes, etc.) and modular synths. Footswitch allows to switch on or bypass eects making Fusionbox ideal

for guitar players.

Fusionbox Block diagram

FusionBox

WHAT YOU GET?

Fusionbox

Universal 12V PSU

User manual

FEATURES

Delay and Flanger eects

Vintage Ensemble Stereo eect

Tube overdrive in the delay output and feedback path

FX send/receive connector

Footswitch connector

2 BBD chips (1024 and 4096 stages)

Passive Lowpass lter for extreme subbass sound

SPECS

Input signal level ..........................................................................................................................................up to 20V ptp

Input signal amplication ..............................................................................................................................up to +48dB

Power supply: .....................................................................................................................................................110 – 220V

Mass: ...............................................................................................................................................................................0,7kg

Dimensions: ................................................................................................................................................ 185x140x55mm

FusionBox