Erica Synths Pico Mod Manual


Læs gratis den danske manual til Erica Synths Pico Mod (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Erica Synths Pico Mod, eller vil du spørge andre brugere om produktet?

Side 1/3
FEATURESTECHNICAL SPECS
Thank you for purchasing Erica Synths Pico Series module!
With Pico Series we challenged ourselves can we make ANY
superior functionality synth module 3HP wide and affordable?
Erica Pico Modulator combines Envelope Generator and VCA in
one module with straight-forward controls for live
performances.
Selectable AD or ASR modes
Selectable lin or log envelope shapes
Loop mode without Gate in
Envelope output
Gate in and output signal control LEDs
Attack time 0-4" (8" in loop mode)
Decay/Release time 0-4" (8" in loop mode)
EG amplitude 0V 10V
VCA attenuation level (0V CV In) -80dB
VCA gain 1
Power consumption +28mA, -5mA
Module width 3HP
Module depth 35mm
MOD
PICO
PICO
MOD
Use this knob to set Attack time
Switch between Triggered (AD) or
Gated (ASR) modes! In TRIG mode the
module ignores Gate length and
triggers the envelope in AD mode on
the rising edge of incoming signal
This LED indicates incoming gate signal
This LED gives visual feedback on
envelope out signal
Tis is VCA input. Patch here audio
signal, you wish to modulate. The input
is AC coupled to avoid clipping
Patch the Gate signal here to trigger
the envelope. When no cable is patched
here, the module automatically
advances to looping mode
Switch between linear or logarithmic
envelopes
This is envelope output
Tis is VCA output
Use this knob to select Decay/Release
time


Produkt Specifikationer

Mærke: Erica Synths
Kategori: Ikke kategoriseret
Model: Pico Mod

Har du brug for hjælp?

Hvis du har brug for hjælp til Erica Synths Pico Mod stil et spørgsmål nedenfor, og andre brugere vil svare dig