Erica Synths Pico MScale Manual

Erica Synths Ikke kategoriseret Pico MScale

Læs gratis den danske manual til Erica Synths Pico MScale (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Erica Synths Pico MScale, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Thank you for purchasing Erica Synths Pico Series module!

With Pico Series we challenged ourselves – can we make ANY superior

functionality synth module 3HP wide and affordable? Yes, we can.

Erica Pico MSCALE (Moog Scale, to be specific) is precision scaler to adapt

Moog Mother 32 to eurorack standard 1V/oct control voltages. Those,

who own Moog Mother 32 know, that it requires -5V - +5V on 1V/oct input

to operate in full range, while the eurorack standard is 0V - +10V. So,

to control Moog Mother 32 from a eurorack sequencer you need to bias

a sequencer output for 5 volts down. And vice versa – Moog Mother 32

sequencer outputs -5V - +5V on 1V/oct output, and, if you wish to control

some eurorack VCO from Moog Mother 32, you need to bias it 5 volts up.

This is exactly what MSCALE does – it has two sections – upper one adds

5V to the input voltage, other subtracts 5V form the input voltage.

Of course, the module is not limited for use with Moog Mother 32 only.

You can use it as a regular eurorack precision voltage scaler.

FEATURESTECHNICAL SPECS

Precision scaler to adapt Moog Mother 32 1V/oct to

eurorack standard

Moog to eurorack section

Eurorack to Moog section

High precision, high temperature stability

Skiff friendly, compact design

Max frequency drift over 5 octaves +-4 CENTS

Power consumption +6mA, -6mA

Module width 3HP

Module depth 25mm

MSCALE

PICO

The upper section

of the module converts

the 1V/oct output of the

Moog Mother 32 sequencer

to the eurorack standard,

namelY, it adds 5V

to the output voltage.

Patch the output of the

Moog Mother 32 sequencer

(marked KB on the Moog

Mother) here!

This is the output

of the top section –

patch eurorack VCO

1V/oct input here

and you can control

the VCO from the

Moog Mother 32

sequencer

This is the output

of the bottom

section –

patch Moog Mother

32 VCO 1V/oct input

here and you can

control it from the

regular eurorack

setup.

The lower section

of the module converts the

1V/oct output of an eurorack

sequencer or CV keyboard

to control Moog Mother 32,

namely, it subtracts 5V from

the input voltage.

Patch the CV output of your

eurorack sequencer or CV

keyboards here!

PICO

MSCALE

Produkt Specifikationer

Mærke:	Erica Synths
Kategori:	Ikke kategoriseret
Model:	Pico MScale

Har du brug for hjælp?

Hvis du har brug for hjælp til Erica Synths Pico MScale stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Erica Synths Manualer

Erica Synths Perkons Voice Manual

30 Juli 2025

Erica Synths Matrix Mixer Manual

30 Juli 2025

Erica Synths Dual Drive Manual

23 August 2024

Erica Synths Fusion VCO2 Manual

21 August 2024

Erica Synths Black DJ VCF Manual

21 August 2024

Erica Synths Black Dual VCF Manual

19 August 2024

Erica Synths Pico Multi Manual

19 August 2024

Erica Synths Hi-Hats A Manual

19 August 2024

Erica Synths Black VC Clock Manual

17 August 2024

Erica Synths Black Modulator v2 Manual

17 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Growatt MIC 600-3300TL-X Manual

25 August 2025

Scanstrut SC-V-S1 Manual

25 August 2025

MSW -PTC-900 Manual

25 August 2025

Sani-Lav H20WS Manual

25 August 2025

Dometic DG3 Manual

25 August 2025

Delfield F2660CP Manual

25 August 2025

MSW -HPB-01 Manual

25 August 2025

Deye SUN-3.6K-SG05LP1-EU Manual

25 August 2025

SilverCrest STKP 800 A1 Manual

25 August 2025

Deye SUN-12K-SG01HP3-US-AM2 Manual

25 August 2025