Erica Synths Pico VCO2 Manual


Læs gratis den danske manual til Erica Synths Pico VCO2 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Erica Synths Pico VCO2, eller vil du spørge andre brugere om produktet?

Side 1/3
FEATURESTECHNICAL SPECS
Thank you for purchasing Erica Synths Pico Series module!
With Pico Series we challenged ourselves can we make ANY
superior functionality synth module 3HP wide and affordable?
Yes, we can.
When we decided to expand the Pico series, we realized, we need
more analogue designs. Therefore we give you
Erica synths Pico VCO2 powerful, full analogue VCO with
great tracking over 8 octaves just in 3HP! Combine two of those,
add some PWM and have a sound of real analogue beast!
Manual TUNE and PWM controls
+-1 octave switch
1V/oct input with good tracking across 8 octaves
PWM CV input
Pulse and triangle waveform outputs
Input protection against overvoltage
Protection against reverse PSU connection
Output signal amplitude -5V - +5V
PWM CV input (full span) -5V - +5V
Power consumption +21mA, -19mA
Module width 3HP
Module depth 35mm
VCO2
PICO
PICO
VCO2
Patch the sequencer or any
FM source here
Adjust the tune of the VCO manually!
1V/oct CV is added to the setting
of this knob
Adjust Pulse Width manually!
PWM CV is added to the setting
of this knob
This is Pulse wave output
Three position switch allow you
to transpose the pitch of the VCO
one octave up or down
This is PWM CV input. Experiment
with different modulation sources
to get drones, rhythmic patterns
and fat analogue sound
This is gentle sounding
Triangle wave output


Produkt Specifikationer

Mærke: Erica Synths
Kategori: Ikke kategoriseret
Model: Pico VCO2

Har du brug for hjælp?

Hvis du har brug for hjælp til Erica Synths Pico VCO2 stil et spørgsmål nedenfor, og andre brugere vil svare dig