Ernitec 0070-08316 Manual

Ernitec Overvågningskamera 0070-08316

Læs gratis den danske manual til Ernitec 0070-08316 (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Ernitec 0070-08316, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Special Announcement

For more information, please refer to website.

Fully understand this document before using this device, and

strictly observe rules in this document when using this device. If

you install this device in public places, provide the tip "You have

entered the area of electronic surveillance" in an eye-catching

place. Failure to correctly use electrical products may cause fire

and severe injuries.

It alerts you to moderate dangers which, if not

avoided, may cause minor or moderate injuries.

It alerts you to risks. Neglect of these risks may

use device damage, data loss, device

performance deterioration, or unpredictable results.

It provides additional information.

Ÿ Strictly observe installation requirements when installing the

device. The manufacturer shall not be held responsible for

device damage caused by users' non-conformance to these

requirements.

Ÿ Strictly conform to local electrical safety standards and use

power adapters that are marked with the LPS standard when

installing and using this device. Otherwise, this device may be

damaged.

Ÿ Use accessories delivered with this device. The voltage must

meet input voltage requirements for this device.

Ÿ If this device is installed in places with unsteady voltage, ground

this device to discharge high energy such as electrical surges in

order to prevent the power supply from burning out.

Ÿ When this device is in use, ensure that no water or any liquid

flows into the device. If water or liquid unexpectedly flows into

the device, immediately power off the device and disconnect all

cables (such as power cables and network cables) from this

device.

Ÿ Do not focus strong light (such as lighted bulbs or sunlight) on

Ÿ Avoid heavy loads, intensive shakes, and soaking to prevent

damages during transportation and storage. The warranty does

not cover any device damage that is caused during secondary

packaging and transportation after the original packaging is

taken apart.

Ÿ Protect this device from fall-down and intensive strikes, keep the

device away from magnetic field interference, and do not install

the device in places with shaking surfaces or under shocks.

Ÿ Clean the device with a soft dry cloth. For stubborn dirt, dip the

cloth into slight neutral c

leanser, gently wipe the dirt with the

cloth, and then dry the device.

Ÿ Do not jam the ventilation opening. Follow the installation

instructions provided in this document when installing the device.

Ÿ Keep the device away from heat sources such as radiators,

electric heaters, or other heat equipment.

Ÿ Keep the device away from moist, dusty, extremely hot or cold

places, or places with strong electric radiation.

Ÿ If the device is installed outdoors, take insect- and moisture-

proof measures to avoid circuit board corrosion that can affect

monitoring.

Ÿ Remove the power plug if the device is idle for a long time.

Ÿ Before unpacking, check whether the fragile sticker is damaged.

If the fragile sticker is damaged, contact customer services or

sales personnel. The manufacturer shall not be held responsible

for any artificial damage of the fragile sticker.

Ÿ All complete products sold by the manufacturer are delivered

along with nameplates, quick setup guide and accessories after

strict inspection. The manufacturer shall not be held responsible

for counterfeit products.

Ÿ The manufacturer will update this manual according to product

function enhancement or changes and regularly update the

software and hardware described in this manual. Update

information will be added to new versions of this manual without

prior notice.

Ÿ This manual may contain misprints, technology information that

is not accurate enough, or product function and operation

description that is slightly inconsistent with the actual product,

the final interpretation of company is as a standard.

Ÿ This manual is only for reference and does not ensure that the

information is totally consistent with the a

ctual product. For

consistency, see the actual product.

Precautions

Open the package, check the appearance of product for no

obvious damage, and confirm the item list for table 1-1 is

consistent.

Table 1-1 Packing list

2.1 Device Ports

Different devices may have different multi-head cables;

Please refer to the actual product.

NOTE

this device. Otherwise, the service life of the image sensor may

be shortened.

Ÿ If this device is installed in places where thunder and lightning

frequently occur, ground the device nearby to discharge high

energy such as thunder strikes in order to prevent device

damage.

Ÿ The laser from the laser high speed camera can not directly face

the human eyes to avoid possible damage to the human eyes.

Ÿ Laser high-speed cameras’ lasers may cause fire hazards when

directly facing flammable objects within short distance, Please

keep a certain safe distance during instal

lation.

Figure 2-1 Multi-head cable

Table 2-1 Multi-head cable description

2.2 Camera Dimensions

Figure 2-2 Dimensions (Unit :mm)

Different devices may have different dimensions; Please

refer to the actual product.

NOTE

CAUTION

WARNING

CAUTION

Device Structure

Open Package Examination

Core Function Description

N/A

Audio output Connect to an external audio

device such as a speaker.

N/A

Audio input

Receive an analog audio signal

from devices such as a

sound pickup device

N/A

Supply power

DC12V

Yellow

green

Grounding wire

Connect to ground.

N/A

Network interface

Connect to a standard Ethernet

cable.

Purple

Alarm input 1

Alarm input and alarm output

ports.

Gray Alarm input COM

Yellow Alarm input 2

Orange

Alarm output COM

White Alarm output 1

Component

Quantity

Remark

High Speed Dome Camera

Quick Setup Guide 1

Power adapter 1

Power wire 1

A pair of gloves 1

Wall mount bracket 1 Optional

L Wrench 1

Stainless hexagon screw

Expansion bolt 4

292.6

150

Figure 2-3 Installing SD card

Loose the four screws

take out the device core

Plug SD card in

φ173.2

φ42

φ38

Reset button

Jupiter Pro Network Camera

5MP PTZ 30x Zoom Optical

Quick Setup Guide

Item no.: 0070-08316

Produkt Specifikationer

Mærke:	Ernitec
Kategori:	Overvågningskamera
Model:	0070-08316
Kode for international beskyttelse (IP):	IP66
Type:	IP-sikkerhedskamera
Vekselstrømsindgangsspænding:	24 V
Højde:	362.8 mm
Vægt:	5500 g
Produktfarve:	Black, White
Wi-Fi:	Ingen
Bluetooth:	Ingen
Formfaktor:	Pære
Relativ luftfugtighed ved drift (H-H):	0 - 90 %
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Understøttede lydformater:	G.711, PCM
Strømforbrug (typisk):	30 W
Driftstemperatur (T-T):	-40 - 60 °C
Maksimal opløsning:	2592 x 1944 pixel
Husmateriale:	Metal
Beskyttelsesfunktioner:	Vandtæt
Understøttelse af sprog:	Flere
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	1 kanaler
Understøttede netværksprotokoller:	IPv4, IPv6, TCP / IP, HTTP, HTTPS, UPnP, RTSP / RTP / RTCP, IGMP / Multicast, SMTP, DHCP, NTP, DNS, DDNS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, TLS
Webbaseret administration:	Ja
Strømkilde type:	AC, DC, PoE
Monteringstype:	Væg
Diameter:	226 mm
Indbygget kortlæser:	Ja
Indbygget HDD:	Ingen
Understøttet placering:	Indendørs & udendørs
Antal brugere:	10 bruger(e)
Bæredygtighedscertifikater:	CE, Federal Communications Commission (FCC)
Hvidbalance:	Auto, Manual
Sensortype:	CMOS
Samlet antal megapixels:	5 MP
Optisk zoom:	30 x
Digital zoom:	16 x
Fokus:	Motordrevet/manuel
Autofokus:	Ja
Maksimal størrelse på hukommelseskort:	256 GB
Hældningsvinkelområde:	0 - 90 °
Progressiv scanning:	Ja
Overholdelse af bæredygtighed:	Ja
Bredt dynamikområde (WDR):	Ja
Dag/nat funktion:	Ja
Infrarød (IR) cut-off filter:	Ja
Kamerapanorering kontrol:	Ja
Kontrol af kamerahældning:	Ja
Minimumsbelysning:	0 Lux
Panoreringsområde:	0 - 360 °
Rotationsvinkel:	360 °
Antal sensorer:	1
Optisk sensorstørrelse:	1/2.8 "
Zoom kapacitet:	Ja
Maksimale blænderåbning tal:	4.3
Nattesyn:	Ja
LED type:	IR
Billedhastighed:	30 fps
Justering af billedkvalitet:	Brightness, Contrast, Saturation, Sharpness
Fortrolighedspolitik maskering:	Ja
Ethernet-grænsefladetype:	Hurtigt ethernet
Bevægelsessensor (video):	Ja
DC udgangsspænding:	36
Antal kameraer:	1
Brændviddeområde:	5.3 - 159 mm
Kameraets lukkerhastighed:	1/5 - 1/20000 sek./side
Signal/støjforhold:	55 dB
Mindste blænderåbnimg tal:	1.6
Antal linser:	1
Streaming metode:	Unicast
PTZ-kontrol:	Ja
Nattesyn, afstand:	200 m
Intelligent Video Surveillance (IVS) systemfunktioner:	Crossing line, Human detection, Intrusion, People counting, Vehicle detection
Bit-rate:	100 kbps - 12 Mbps
Spejl:	Ja
Region of Interest (ROI) kodning:	Ja
Kompensation for baggrundslys:	Ja
Antal sprog:	10
Objektivets synsvinkel, vandret:	56.62 - 2.48 °
Alarmindgang/-udgang:	Ja
Objektivets synsvinkel, lodret:	42.76 - 1.91 °
Lyd, indgående kanaler:	1 kanaler
Highlight Compensation (HLC):	Ja
Auto-sporing:	Ja
Antal forudindstillede programmer:	400
Smart IR:	Ja
Forudindstillet hastighed:	180 grader i sekundet
Støjreduktionsteknologi:	3D støjreduktion
PTZ-tilstande:	Forudindstillet punkt
Bitrate kontrol:	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)
Tilt forudindstillet hastighed:	90 grader i sekundet
Kan bruges i tåge:	Ja
Alarm indgangskanaler:	7
Alarm udgangskanaler:	2
Antal videostreams:	3
Antal områder med Privacy-maskering:	40
Panoreret manuel hastighed:	0.1 - 180 grader i sekundet
Vippet manuel hastighed:	0.1 - 90 grader i sekundet
PTZ-statusvisning:	Ja