ETC Unison Foundry Manual

ETC Lettelse Unison Foundry

Læs gratis den danske manual til ETC Unison Foundry (16 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om ETC Unison Foundry, eller vil du spørge andre brugere om produktet?

Side 1/16
ETC Installation Guide
Unison Foundry Phase-Adaptive Dimmer
Corporate Headquarters
Corporate Headquarters
Corporate Headquarters
Corporate HeadquartersCorporate Headquarters Middleton, WI, USA +1 608 831 4116
London, UK
London, UK
London, UK
London, UKLondon, UK +44 (0)20 8896 1000 Holzkirchen, DE
Holzkirchen, DE
Holzkirchen, DE
Holzkirchen, DEHolzkirchen, DE +49 (80 24) 47 00-0
Rome, IT
Rome, IT
Rome, IT
Rome, IT Rome, IT +39 (06) 32 111 683 Hong Kong
Hong Kong
Hong Kong
Hong Kong Hong Kong +852 2799 1220 Paris, FR
Paris, FR
Paris, FR
Paris, FRParis, FR +33 1 4243 3535
Web
Web
Web
WebWeb
etcconnect.com Support
Support
Support
Support Support support.etcconnect.com
Contact
Contact
Contact
Contact Contact etcconnect.com/contactETC © 2019 Electronic Theatre Controls, Inc.
Product information and specifications subject to change. ETC intends this document to
be provided in its entirety. Trademark and patent info: etcconnect.com/ip
7179M2100
7179M2100
7179M2100
7179M21007179M2100 Rev G Released 2019-12
Overview
Overview
Overview
OverviewOverview
The Unison Foundry Phase-Adaptive Dimmer provides control for 120 V and
277 V line voltage loads that require forward-phase or reverse-phase
dimming, up to 600 watts.
The Phase-Adaptive Dimmer can be wired to individual fixtures or used for
zone control, and automatically provides reverse-phase or forward-phase
dimming based on the connected load type.
Control connected loads from any DMX control device. Configure the
Phase-Adaptive Dimmer either remotely via RDM (using a tool like ETC
Concert) or locally on the controller. See
Configure the Phase-Adaptive
Configure the Phase-Adaptive
Configure the Phase-Adaptive
Configure the Phase-Adaptive Configure the Phase-Adaptive
Dimmer
Dimmer
Dimmer
DimmerDimmer
on
page
page
page
pagepage 6
6
6
66
.
Specifications
Specifications
Specifications
SpecificationsSpecifications
Ambient Environment
Ambient Environment
Ambient Environment
Ambient EnvironmentAmbient Environment
For indoor use only. Rated for plenum use.
0°C to 50°C (32°F to 122°F) operating temperatures in 5%–95%
non-condensing humidity.
120
120
120
120120 VAC model
VAC model
VAC model
VAC modelVAC model
shown
shown
shown
shownshown
ETC Installation Guide
Phase-Adaptive Dimmer
Phase-Adaptive Dimmer Page 2 of 16 ETC
Electrical Specificatio
Electrical Specificatio
Electrical Specificatio
Electrical SpecificatioElectrical Specification
n
n
nn
Two models are available:
120 VAC, +/- 10% at 47–63 Hz, maximum load 600 W
277 VAC, +/- 10% at 47–63 Hz, maximum load 600 W
Supported load types:
• Tungsten
2-wire Fluorescent
• LED
Electronic low voltage transformer
Compliance
Compliance
Compliance
ComplianceCompliance
cULus listed
Conforms to UL 508 (Industrial Control Equipment), UL 916 (Energy
Management Equipment) and UL 2043 (Plenum rated)
Certified to CSA C22.2 No. 14 (Industrial Control Equipment) and No.
205 (Signal Equipment)
Note:
Note:
Note:
Note:Note:
ETC does not support the use of the Phase-Adaptive
Dimmer with magnetic loads.


Produkt Specifikationer

Mærke: ETC
Kategori: Lettelse
Model: Unison Foundry

Har du brug for hjælp?

Hvis du har brug for hjælp til ETC Unison Foundry stil et spørgsmål nedenfor, og andre brugere vil svare dig