EtherWAN ED3575 Manual


Læs gratis den danske manual til EtherWAN ED3575 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5 anmeldelser. Har du et spørgsmål om EtherWAN ED3575, eller vil du spørge andre brugere om produktet?

Side 1/2
W70G-ED3575XQ5 Page 1
Installation Guide
ED3575 Series | Managed Switch / Ethernet Extender
Copyright 2023 EtherWAN Systems, Inc. All Rights Reserved 03/29/2023
1 Unpacking
Unpack the items. Your package should include:
One ED3575 Series hardened managed Ethernet
Extender
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton and
packing material.
2 What Else You Need
Category 5 or better cable for RJ-45 ports
Appropriate cables for fiber and SFP ports
Telephone wire (24AWG with minimum 0.5mm
diameter) for Ethernet Extender ports (RJ-11
connector or Terminal Block)
Personal computer with a DB9 straight cable
3 Select a Location
Installations: Desktop, Wall-mount, DIN-Rail
mount.
Installation must be at a height of at least 6 feet
(1.8 meters) above the floor.
Identify a power source within 6 feet (1.8 meters).
Choose a dry area with ambient temperature
between -40 and 75ºC (-40 and 167ºF).
Keep away from heat sources, sunlight, warm air
exhausts, hot-air vents, and heaters.
Be sure there is adequate airflow.
Keep the Ethernet Extender at least 6 ft. (1.83 m)
away from the nearest source of electromagnetic
noise, such as a photocopy machine.
4 Connect to the Data Ports
Depending on the model, your Ethernet Extender can
have the following ports:
6 10/100BASE-TX ports
2 Gigabit combo ports
2 Ethernet Extender ports (RJ-11 connector or
Terminal Block)
1 Gbps Combo/SFP Ports
If your switch model has combo ports, you can
connect them to network devices such as a computer,
printer, network video recorder (NVR), network
storage, or they can connect to the network itself.
Combo ports operate in “either/or” fashion. This
means that attaching to a 1 Gbps combo port renders
the equivalent partner combo port unavailable.
Ethernet Extender Ports
Insert the voice grade copper wire between one pair
of Ethernet Extenders via Ethernet Extender port (RJ-
11 connector or Terminal Block). One device must be
set to LOC mode and the other to RMT mode when
two devices are connected.
5 Front Panel LEDs
LED
Color
Status
10/100Base-TX LEDs
Link/Act
Green
ON = valid network connection is
established.
Flashing = port sending or
receiving data.
10/100/1000Base-TX LEDs
Link/Act
Green
ON = valid network connection is
established.
Flashing = port sending or
receiving data.
1000Base SFP LEDs
Link/Act
Green
ON = valid network connection is
established.
Flashing = port sending or
receiving data.
Ethernet Extender Port LEDs
Link/Act
Green
ON = valid network connection is
established.
Flashing = port sending or
receiving data.


Produkt Specifikationer

Mærke: EtherWAN
Kategori: Ikke kategoriseret
Model: ED3575

Har du brug for hjælp?

Hvis du har brug for hjælp til EtherWAN ED3575 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret EtherWAN Manualer

EtherWAN

EtherWAN EX42905 Manual

4 November 2025
EtherWAN

EtherWAN ED3575 Manual

4 November 2025
EtherWAN

EtherWAN AiR PACE CL Manual

4 November 2025
EtherWAN

EtherWAN EX41922 Manual

3 November 2025
EtherWAN

EtherWAN SmartE Manual

3 November 2025
EtherWAN

EtherWAN PD1041 Manual

1 November 2025
EtherWAN

EtherWAN EX94000 Manual

1 November 2025
EtherWAN

EtherWAN EX87000 Manual

1 November 2025
EtherWAN

EtherWAN ED3541 Manual

1 November 2025
EtherWAN

EtherWAN EX89000 Manual

31 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer