EtherWAN EX78900X Manual

EtherWAN bryter EX78900X

Læs gratis den danske manual til EtherWAN EX78900X (2 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om EtherWAN EX78900X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

W70G-EX78900XQ3 Page 1

Installation Guide

EX78900X Series | Hardened Managed Ethernet Switch

Switch

Unpacking

Open the carton and unpack the items. Your package should include:

▪ One EX78934X hardened managed switch

▪ One RJ-45 console cable

If any items are missing or damaged, notify your EtherWAN representative. If

possible, save the carton and packing material in case you need to ship or store the

switch in the future.

What Else You Need

▪ Appropriate cables for data ports. To prevent damage to the switch from

electrical surges, it is recommended to use STP (Shielded twisted pair)

cabling.

▪ Personal computer or laptop

▪ Appropriate SFP modules for SFP ports

Select a Location

▪ Installations: DIN-Rail mount.

▪ Select a power source within 6 feet (1.8 meters).

▪ Choose a dry area with ambient temperature between -40 and 75ºC (-40

and 167ºF).

▪ For use at altitudes up to 2000 meters, indoor use only.

▪ Humidity range (Operational): 5% to 95%, non-condensation

▪ For use in Pollution 2 environment.

▪ Do not block the device ventilation holes.

Connect to the Data Ports

Depending on the model, your switch can have the following ports:

EX78934X-0VB

12-port 10/100/1000BASE-T(12 x 90W) PoE

+ 4-port 1G/10G SFP+

EX78934X-0VB-CC

12-port 10/100/1000BASE-T(12 x 90W) PoE

+ 4-port 1G/10G SFP+

10/100/1000BASE-TX (PoE) Ports

Ports that support Power over Ethernet provide power to networked devices such

as IP Phones, Wireless LAN Access Points, and IP security cameras with a power

budget of 360 Watts.

PoE 90W Limitation

When using PoE ports at 90 Watts, use PoE ports – 1, 4, 8, and 9 for 90W PoE. See

example below:

1G/10G SFP Ports

SFP transceivers can be installed directly into SFP slots. Ensure that the same type

of transceiver is used at both ends of the link and that the correct type of fiber

cable is used.

Connect Power

▪ The switch has two pairs of power inputs.

▪ Only one power input is required to operate the switch. However,

redundant power supply functionality is supported.

▪ Power rating:

▪ PoE 30 Watts per port: 52–57 VDC, 7.3-6.7 A

▪ PoE 90 Watts per port: 54–57 VDC, 7.1-6.7 A.

▪ The power input specification complies with the requirements of SELV

(Safety Extra Low Voltage), and the power supply should comply with UL

61010-1 and UL 61010-2-201.

Terminal Block

The switch provides two power inputs on a 52-57VDC terminal block. The

terminal block has 5 terminal posts.

Description

Power 1

52-57VDC

−

Power Ground

Power 2

52-57VDC

Power Ground

Earth Terminal

Relay Output

Rating

0.5A @48VDC

Relay Output Alarm

The switch provides two relay output contacts. Both Relay 1 and Relay 2 signal

actions from one of the digital inputs. The relay outputs can be connected to an

alarm signaling device. The Current is 0.5A@48VDC at Normal Open or Normal

Close.

3 Normal Open | 2 Ground | 1 Normal Close

Power-Up Sequence

When the switch is powered up:

▪ All Link/ACT LEDs blink momentarily.

▪ The Power 1 LED light goes ON.

▪ LEDs for every port connected to a device will flash, as the switch conducts a

brief Power On Self-Test (POST).

Front Panel LEDs

LED

Color

Status

Power 1 & 2

Green

On: Power on

Off: Power off

Link/Act

Green

On: Network connection established

Flashing: Port sending or receiving data

PoE

Amber

On: Powered device is connected

Off: Powered device is disconnected

Alarm

Red

Link down or power down

Produkt Specifikationer

Mærke:	EtherWAN
Kategori:	bryter
Model:	EX78900X

Har du brug for hjælp?

Hvis du har brug for hjælp til EtherWAN EX78900X stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

bryter EtherWAN Manualer

EtherWAN EX17008 Manual

4 November 2025

EtherWAN EX78900X Manual

4 November 2025

EtherWAN EX75000 Manual

3 November 2025

EtherWAN EasyPoE Box Manual

2 November 2025

EtherWAN EG97023 Manual

2 November 2025

EtherWAN ED3601 Manual

2 November 2025

EtherWAN InfraGreEn IG5 Manual

2 November 2025

EtherWAN EX26484 V2 Manual

2 November 2025

EtherWAN EX78162 Manual

1 November 2025

EtherWAN EX17082A Manual

1 November 2025

bryter Manualer

Nyeste bryter Manualer

D-Link DMS-1016 Manual

3 November 2025

D-Link DMS-1024 Manual

3 November 2025

F-Tronic JUMBO60+10 Manual

3 November 2025

Dahua Technology PFS3210-8ET2GF-96 Manual

26 Oktober 2025

TP-Link Omada DS106GPP Manual

19 Oktober 2025

Draytek VigorSwitch PQ2200xb Manual

17 Oktober 2025

Kramer VS-88H2 Manual

16 Oktober 2025

Lancom GS-3126X Manual

16 Oktober 2025

Lancom GS-2310 Manual

16 Oktober 2025

Lancom GS-3628X Manual

16 Oktober 2025