EXSYS EX-60300 Manual


Læs nedenfor 📖 manual på dansk for EXSYS EX-60300 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.4 stjerner i gennemsnit af 2 brugere

Side 1/2
DC RUN LED
PoE LEDRUN
6 5
Mit dem Gigabit Ethernet PoE Injektor EX 60300 im Metallgehäuse können Endgeräte wie -
beispielsweise IP Telefone, IP Kameras, WLAN Access Points etc. über das Netzwerkkabel mit - -
Spannung versorgt werden. Er unterstützt den PoE+ Standard IEEE 802.3at. Die Maximalleis-
tung (PD) am PoE Port beträgt im Typ 1 12.95W und im Typ 2 25.50W. Die Stromversorgung
vom externen Netzteil erfolgt über die +12~52V DC Buchse. Der EX 60300 gewährleistet eine -
sichere Datenübertragung und exzellente Performance von bis zu 1000Mbit/s. Das robuste
Metallgehäuse ist zur Wandmontage geeignet. Im Lieferumfang ist ein 36W Netzteil enthalten.
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Anleitun
Vers. 1.0 / 01.12.22
E 6030
Kompatibilität: Gigabit Ethernet 10/100/1000Base T -
PoE: IEEE 802.3af/at (PoE+)
PoE (PSE): Typ 1 = 15.4W / Typ 2 = 34.2W
Betriebssysteme: Alle Betriebssysteme
Anschlüsse: 2x RJ45 Buchse, 1x DC Buchse 12~52VDC - -
Lieferumfang: 60300, Netzteil 24V/1.5A, Anleitung EX-
Zertifikate:
HARDWARE INSTALLATION
CONNECTORS & LED'S
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
12V to 52V DC Jack:
ATTENTION!
Please pay attention to the correct polarity!
Status LEDs:
LED Name Color LED Function
DC RUN Green
On: Powered
Off: no power connection
PoE RUN
Green
On: PoE activated
Off: no (PD) device connected
RJ45 Port:
To clean the device, please use only a dry, non fibrous cloth and remove the dirt with light -
pressure. In the area of the connections, please make sure that no fibers of the cloth are left in
the socket. Attention! Never use a moist or wet cloth for cleaning!
CLEANING
Please read the following installation instructions.
1. Connect the power connector of the power supply to the DC Jack and turn on the power
supply.
2. When the power is turned on, the PWR indicator lights up. If the indicator is not lit, check
for proper connection to the power supply.
3. Connect your router to the RJ45 input of the PoE injector.
4. Now connect your PoE PD device to the PoE port.
5. If all cables are connected correctly, the indicators light according to the port status of the
LEDs (page 5).
RJ45 Port
Pin Signal PoE Pin Signal PoE
1 BI_DA+ VCC+ 5 BI_DC VCC+ -
2 BI_DA VCC+ 6 BI_DB VCC - - -
3 BI_DB+ VCC 7 BI_DD+ VCC - -
4 BI_DC+ VCC+ 8 BI_DD VCC - -
-
+
RJ45 Downlink (PoE/Daten)-
12- 52V DC Buchse für Netzteil
PoE RUN LED
RJ45 Uplink (Daten)-
DC RUN LED
RJ45 Anschluss
Pin Signal PoE Pin Signal PoE
1 BI_DA+ VCC+ 5 BI_DC VCC+ -
2 BI_DA VCC+ 6 BI_DB VCC - - -
3 BI_DB+ VCC 7 BI_DD+ VCC - -
4 BI_DC+ VCC+ 8 BI_DD VCC - -
Beachten Sie bitte die folgenden Installationshinweise.
1. Schließen Sie den Stromanschluss des Netzteils an den DC Jack an und schalten Sie das
Netzteil ein.
2. Nach dem Einschalten des Geräts leuchtet die DC RUN Anzeige. Wenn die Anzeige nicht
leuchtet, überprüfen Sie den korrekten Anschluss an die Stromversorgung.
3. - - Verbinden Sie Ihren Router mit dem RJ45 Eingang des PoE Injectors.
4. -Schließen Sie nun Ihr PoE PD- Gerät an den PoE Anschluss an.
5. Wenn alle Kabel korrekt angeschlossen sind, leuchten die Anzeigen entsprechend dem
Portstatus der LEDs (Seite 2).
2 3
HARDWARE INSTALLATION
ANSCHLÜSSE & LED'S
LAYOUT
Manua
Vers. 1.0 / 01.12.22
E 6030
ACHTUNG!
Bitte auf die richtige Polarität achten!
Schweiz:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Deutschland:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
Status LEDs:
LED Name Farbe LED Funktion
DC RUN Grün
An: Stromversorgung an
Aus: keine Stromversorgung
PoE RUN
Grün
An: PoE ist aktiv
Aus: Kein (PD) Gerät angeschlossen
With the Gigabit Ethernet PoE Injector EX 60300 in a metal housing, end devices such as IP -
telephones, IP cameras, WLAN access points, etc. can be supplied with power via the network
cable. It supports the PoE+ standard IEEE 802.3at. The maximum power (PD) at the PoE port
is 12.95W in type 1 and 25.50W in type 2. Power is supplied from the external power supply via
the +12~52V DC jack. The EX 60300 ensures secure data transmission and excellent perfor--
mance of up to 1000Mbps. The robust metal housing is suitable for wall mounting. A 36W
power supply is included in the delivery.
DESCRIPTION & TECNICAL INFORMATION
Compatibility: Gigabit Ethernet 10/100/1000Base T -
PoE: IEEE 802.3af/at (PoE+)
PoE (PSE): type 1 = 15.4W / type 2 = 34.2W
Operating System: All operating systems
Connectors: 2x RJ45 Port 1x DC Jack 12~52VDC - ,
Extent of Delivery: 60300, Power Supply 24V/1.5A, Manual EX-
Certificates:
RJ45 Anschluss:
Zur Reinigung des Gerätes verwenden Sie bitte ausschließlich ein trockenes nicht faserndes
Tuch und entfernen Sie die Verschmutzung mit leichtem Druck. Im Bereich der Anschlüsse bitte
darauf achten, dass keine Fasern des Tuchs in der Buchse hinterlassen werden. Verwenden
Sie bitte zu Reinigung in keinem Fall ein feuchtes oder nasses Tuch!
REINIGUNG
DC RUN LED
PoE LEDRUN
12V bis 52V DC Buchse
RJ45 Downlink (PoE/Data)-
12- 52V DC Jack for power supply
PoE RUN LED
DC RUN LED
RJ45 Uplink (Data)-
-
+


Produkt Specifikationer

Mærke: EXSYS
Kategori: Ikke kategoriseret
Model: EX-60300
Kode for international beskyttelse (IP): IP30
Bredde: 77.5 mm
Dybde: 76.5 mm
Højde: 27 mm
Vægt: 675 g
Brugervejledning: Ja
Produktfarve: Grå
Opbevaringstemperatur (T-T): -40 - 80 °C
Relativ luftfugtighed ved drift (H-H): 5 - 95 %
Relativ luftfugtighed ved opbevaring (H-H): 5 - 95 %
Ethernet LAN-porte (RJ-45): 2
Driftstemperatur (T-T): -4 - 131 °F
Ethernet LAN-datahastigheder: 10,100,1000 Mbit/s
Husmateriale: Metal
Kabelteknologi: 10/100/1000
Netværksstandarder: IEEE 802.3af, IEEE 802.3at
DC-in-stik: Ja
LED-indikatorer: Status
Kan monteres på væggen: Ja
AC-adapter inkluderet: Ja
Bæredygtighedscertifikater: CE, Federal Communications Commission (FCC), RoHS
Indgangsspænding: 12 - 52 V
Strømledning inkluderet: Ja
Oprindelsesland: Kina
Plug and play: Ja
Strøm over Ethernet (PoE): Ja
Overholdelse af bæredygtighed: Ja
Ethernet-grænsefladetype: Gigabit Ethernet
Antal produkter inkluderet: 1 stk
Strømstiktype: Type F
RJ-45 indgangs-porte: 1
Total Power over Ethernet (PoE): 30 W
Power over Ethernet (PoE) effekt pr. port: 30 W
RJ-45 udgangs-porte: 1
Power over Ethernet (PoE) spænding: - V

Har du brug for hjælp?

Hvis du har brug for hjælp til EXSYS EX-60300 stil et spørgsmål nedenfor, og andre brugere vil svare dig