Fetco HWD-2105 Manual

Fetco Vanddispenser HWD-2105

Læs gratis den danske manual til Fetco HWD-2105 (11 sider) i kategorien Vanddispenser. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Fetco HWD-2105, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

Temperature On Demand US design patent applied for. Other Temperature On Demand US patents applied for.

FETCO®, is a trademark of Food Equipment Technologies Company.

NOTICE TO INSTALLER: Please leave this book with the machine.

User

UserUser’

’

’’s Guide

s Guide

s Guides Guide

∫

Touch Function Selector Technology

HWD-2105

Hot Water Dispenser

NEMA PLUG CONFIGURATION

NEMA 5-15P NEMA 5-20P NEMA 6-15P

FETCO

FETCOFETCO®

®® HWD-2105 Hot Water Dispenser

HWD-2105 Hot Water Dispenser

HWD-2105 Hot Water Dispenser HWD-2105 Hot Water Dispenser

Contact Information

Contact Information Contact Information

FETCO ®

Food Equipment Technologies Company

600 Rose Road

Lake Zurich • IL USA • • 60047-0429

Internet: www.fetco.com

Phone: (800) 338-2699 (US & Canada)

(847) 719-3000

Fax: (847) 719-3001

Email: sales@fetco.com

techsupport@fetco.com

Description & Features

Description & Features Description & Features

W ter tem ratu e sele table to 1 8°-20 °F/ 0-9 C a pe r c 5 476° English and Metric tem erat re ran es sele tab e p u g c l

Maximum single dispense is 24ounces/700cc in 15 seconds maximum dispense time

Non-Temperature on Demand and Temperature on Demand (TOD) configurations is available as separate equipment.

Specifications

Specifications Specifications

Standard Electrical Configurations-DOMESTIC & CANADA

Configuration

Code

Heater

Configuration

Voltage Phase Wires

NEMA

Plug

Maximum

Amp Draw

Gallons/Hour

H210511

1 X 1.44 kW 120 1

2+G

NEMA 5-15P

1.5 12.0 4.0 gallon*/15 liter

H210521

1 X 2.1 kW 120 1

2+G

NEMA 5-20P

2.2 17.5 5.7 gallon*/22 liter

Standard Electrical Configurations-DOMESTIC & SPECIALTY

H210531

1 X 3.2 kW 200-240 1

2+G

NEMA 6-15P

2.3-3.3 11.2-13.4 6-8.7gallon*/22.7-33 liter

Electrical Configurations- EXPORT & CANADA

H210541

1 X 3.2 kW 230 1

2+G

Cord Only†

2.9 12.8 7.8 gallon*/29.5 liter

Temperature range is selectable from 158°-207°F/70-97°C based on 207°F/97°C hot water tank temperature.

*Flow rate based on 65-70°F 18-21°C water mains supply temperature at lowest possible power supply current.

Selectable English and Metric temperature units. † For EXPORT, Cord without plug will be attached

Single touch pad selectable hot water dispense temperature.

Power Plug Configurations

Pressure: 40-75 psig, (276-517kPa)

Minimum Flow Rate: 1½gpm (5.7lpm)

Water Requirements:

Water connection inlet: ¼ inch male flare fitting

NEW TECHNOLOGICAL FEATURES

The FETCO hot water dispenser uses new

∫

∫∫

f f

Touch Function Selector Technology to operate the hot water dispenser.

The

∫

∫∫

f f

Touch Function Selector buttons (above and below display screen) alternately dim and brighten when selection is not active.

Dispensing and Feature Selections activate when touched. The front panel is clean and uncluttered.

Programming, display and error codes are interactive and more intuitive.

Float indicator is built into drip tray to help simplify maintenance and cleaning.

NOTE:

The HWD-2105 Digital Hot Water Dispenser cannot be modified into a HWD-2105 TOD Temperature on Demand Hot Water Dispenser

Weights and Capacities

Dispenser Model

Weight

(empty)

Water tank

Capacity

Weight

(filled)

Height

Inches/cm

Wide

Inches/cm

Deep

Inches/cm

Hot Water Dispenser

HWD-2105

24 lbs/10.9kg

3.2 gallon/12

liter

49 lbs/22kg

24 1/2 in/62

9 in/23 cm

18 1/2 in/47 cm

NOTE: Temperature accuracy of dispensed hot water may vary up to 3 ½ % of displayed temperature selection. Factors affecting accuracy include quantity of hot

water dispensed, ambient air temperature, distance of container from hot water faucet (pouring over longer distance causes more cooling)