Fetco HWD-2110 Manual

Fetco Vanddispenser HWD-2110

Læs gratis den danske manual til Fetco HWD-2110 (12 sider) i kategorien Vanddispenser. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Fetco HWD-2110, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Temperature On Demand US design patent applied for. Other Temperature On Demand US patents applied for.

FETCO®, is a trademark of Food Equipment Technologies Company.

NOTICE TO INSTALLER: Please leave this book with the machine.

User

UserUser’

’

’’s Guide

s Guide

s Guides Guide

∫

Touch Function Selector Technology

HWD-2110

Hot Water Dispenser

FETCO® Hot Water Dispenser

Hot Water Dispenser

Hot Water Dispenser Hot Water Dispenser

Contact Information

Contact Information Contact Information

FETCO ®

Food Equipment Technologies Company

600 Rose Road

Lake Zurich • IL USA • • 60047-0429

Internet: www.fetco.com

Phone: (800) 338-2699 (US & Canada)

(847) 719-3000

Fax: (847) 719-3001

Email: sales@fetco.com

techsupport@fetco.com

Description & Features

Description & Features Description & Features

W ter tem ratu e sele table to 1 8°-20 °F/ 0-9 C a pe r c 5 476° English and Metric tem erat re ran es sele tab e p u g c l

Maximum single dispense is 24ounces/700cc in 15 seconds maximum dispense time

Non-Temperature on Demand and Temperature on Demand (TOD) configurations is available as separate equipment.

Specifications

Specifications Specifications

Electrical Configurations-DOMESTIC

Configuration

Code

Heater

Configuration

Voltage Phase Wires

Electrical

Connection

Maximum

Amp Draw

Gallons/Hour

H211011 1 X 5 kW 20 -240 1 2+G NEMA 6-30P pl g 3. -5.1 1 . -21 . -13. gallon*/3 -51 liter 0 u 6 7 4 9 5 56

Electrical Configurations-EXPORT & CANADA

H211021 1 X 5 kW 200-240 1 2+G Cord Only† 3.6-5.1 17.4-21 9.5-13.5gallon*/36-51 liter

* O :N TE Temperature ranges selectable from 158°-20 °F/70-9 °C based4 6 on 207 F/97°C hot water ta k tempe° n rature. † For EXPORT, Cord witho ut plug will be a ached tt

Temperature of dispensed hot water may vary up to 3 ½ % of displayed temperature selection.

*Flow rate per hour based on 65-70°F/18-21°C mains water supply temperature at lowest possible electrical supply current

*Factors affecting temperature accuracy include quantity of hot water dispensed, ambient air temperature, distance of container from hot water faucet (pouring over longer distance causes more cooling)

Power Plug Configurations

Pressure: 40-75 psig, (276-517kPa)

Minimum Flow Rate: 1½gpm (5.7lpm)

Water Requirements:

Water connection inlet: ¼ inch male flare fitting.

Wei

hts and Ca

acities

Dispenser Model Height Width Depth Water tank capacity Empty Weight Filled Weight Shipping Weight

HWD-2110 24 1/2 in/62 cm 10 in/25.4 cm 19 1/2 in/49.5 cm 4.6 gallon/17.4 liter 30 lbs/13.6 kg 68.3 lbs/31 kg 44 lbs/20 kg

NEW TECHNOLOGICAL FEATURES

The FETCO hot water dispenser uses new