FLIR T4325BN Manual

FLIR Overvågningskamera T4325BN

Læs gratis den danske manual til FLIR T4325BN (1 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 17 anmeldelser. Har du et spørgsmål om FLIR T4325BN, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

PACKAGE CONTENTS: Installing the Camera Adjusting the Camera

Thermal Mini Bullet Camera

T4325BN / T4350BN SERIES

Quick Connection Guide

• Use an appropriate low voltage power cable to prevent fire or electrical shock.

• Make sure to install the camera in an area that can support the camera

weight.

• There are no user serviceable parts inside the camera. Please do not

disassemble the camera.

• Be careful not to leave fingerprints on the camera’s infared optics. Clean only

with low pressure fresh water and a lens cloth.

• Camera is rated for outdoor use (IP66), but is not intended for submersion in

water.

• If using DC power, make sure to follow the correct polarity as marked on the

power cable.

Ethernet Port: Connect the camera to a FLIR NVR or a router or switch

on your network using Cat5e or better Ethernet cable (not included). PoE

Class 3 supported.

Power Input: Connect a 12V DC power source if you are not using PoE.

Video Out (BNC): Analog video ouput to a test monitor (optional).

Ethernet Port: Not used.

Power Input: Connect a 12V DC power source (300mA or higher).

Video Out (BNC): Connect the camera to an analog DVR.

Ethernet Port: Install the MPX Terminator.

When you power up the camera with the

MPX Terminator installed, the camera operates as an MPX camera.

Power Input: Connect a 12V DC power source (300mA or higher).

Video Out (BNC): Connect the camera to a FLIR MPX DVR. Video and

MPX camera control are supported over a standard coaxial cable.

Safety PrecautionsWeights & Dimensions

Connecting the Camera

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

FCC Notice

1 2 3

Information in this document is subject to change

without notice. As our products are subject to continuous

improvement, FLIR Systems, Inc. and our subsidiaries reserve

the right to modify product design, specifications and

prices, without notice and without incurring any obligation.

T4325BN_T4350BN_SERIES_QCG_EN_R1

Use the included mounting template to mark holes

for the screws.

Drill holes for the mounting screws.

Connect cables as shown in the section “Connecting

the Camera”.

Mount the camera to the surface using the included

mounting screws (4x).

NOTE: Use the included drywall anchors if installing

into drywall.

1 x IP Bullet Camera 1 x Mounting Template

Quick Start Guides

1 x Allen Key 1 x RJ45 Waterproof Cap

1 x MPX Terminator

4 x Mounting Screws 4 x Drywall Anchors 2 x Allen Set Screws

Use a Phillips head screwdriver (not included) to

loosen the adjustment screw on the camera stand.

IP / PoE

MPX

Analog

Move the camera to the desired position. Tighten the

adjustment screw when finished.

Insert the included Allen set screws (2x).

Tighten the Allen set screws with the included Allen

key.

3.1” / 78mm

0.95lbs / 0.43kg

Weight

6.8” /

173mm

2.8” /

72mm

Drywall anchors (4x)

Mounting screws (4x)

Mounting template

Adjustment screw

Allen set screws (2x)

For support, visit

Latest software and manuals available on

www.flir.com/security/support

12V DC Power Input Polarity

123

Produkt Specifikationer

Mærke:	FLIR
Kategori:	Overvågningskamera
Model:	T4325BN

Har du brug for hjælp?

Hvis du har brug for hjælp til FLIR T4325BN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera FLIR Manualer

FLIR ioi HD CB-5222 Manual

30 Juli 2025

FLIR Ariel CC-3405 Manual

29 Juli 2025

FLIR Ariel CM-3505 Manual

29 Juli 2025

FLIR FH-Series Manual

22 Juli 2025

FLIR FXV101-H Manual

4 Juli 2025

FLIR M42046 Manual

13 September 2024

FLIR PT-117 Manual

8 September 2024

FLIR Saros DH-390 Manual

4 September 2024

FLIR T4350BN Manual

2 September 2024

FLIR M500 Manual

25 August 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

1 August 2025

31 Juli 2025

31 Juli 2025

31 Juli 2025

Eufy Cam S3 Pro Manual

30 Juli 2025

Telycam Vision+ 4KN 30X Manual

30 Juli 2025

Marshall Electronics CV630-BI Manual

30 Juli 2025

Telycam Vision+ SE Manual

30 Juli 2025

Axis Q6355-LE Manual

29 Juli 2025

Sony SNC-EMX52R Manual

29 Juli 2025