FSP Nano 600 Manual

FSP UPS Nano 600

Læs gratis den danske manual til FSP Nano 600 (41 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om FSP Nano 600, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/41
5 Oplossing van problemen .
Probleem
Mogelijke oorzaak
Oplossing
Het waarschuwingslampje
op de voorzijde van de UPS
brandt niet
Lege accu.
Laat de UPS ten minste 6 uur opladen.
Defecte accu.
Vervang de accu door een nieuwe van
hetzelfde type.
De UPS is niet ingeschakeld.
Druk kort op de schakelaar van de UPS,
zodat de in gebruik genomen wordt.
Het alarm klinkt
voortdurend, ook al werkt
het elektriciteitsnet
normaal.
De UPS is overbelast.
Ontkoppel een gedeelte van de belasting.
Controleer vóórdat u de apparaten opnieuw
aansluit, of de belasting beantwoordt aan de
capaciteit van de UPS die in de specificaties
is vermeld.
UPS fout
Het toestel terug naar het service
center.
Het alarm klinkt
voortdurend, ook al
werkt het
elektriciteitsnet normaal.
Defecte accu.
Vervang de batterij met de batterijen
van hetzelfde type.
opladen aan boord is
beschadigd
Het toestel terug naar het service
center.
Bij een stroomuitval werkt
de UPS slechts korte tijd.
De UPS is overbelast.
Ontkoppel een gedeelte van de belasting.
De accuspanning is te laag.
Laat de UPS ten minste 6 uur opladen.
Defecte accu. Het kan om een
gebrek gaan dat veroorzaakt
wordt door een te hoge
omgevingstemperatuur of door
slijtage van de accu.
Vervang de accu door een nieuwe van
hetzelfde type.
Het elektriciteitsnet werkt
normaal, maar de
controle-LED knippert.
De voedingskabel zit los.
Controleer zorgvuldig de aansluiting van de
voedingskabel.
6. Specificaties
Model
Nano 400
Nano 600
Nano 800
CAPACITEIT
400 VA / 240 W
600 VA / 360 W
800 VA / 480 W
Spanning
110/120 VAC of 220/230/240 VAC
Tolerantie
90~145 VAC of 180~270 VAC
frequentie
50 Hz of 60 Hz
Spanningsregeling
+/-10%
Schakeltijd:
Gewoonlijk 2-6 ms
Golfvorm
Gesimuleerde sinusgolf
Type en aantal
12 V / 4.5 AH x 1
12 V / 7 AH x 1
12 V / 9 AH x 1
Oplaadtijd
8 90%uur voor opladen tot van de capaciteit
Afmetingen (l x b x h)
228 82.5 207 mm (@ vertically stand) x x
Gewicht (kg)
2.2
2.7
3.1
Vochtigheid
0-90 %
Temperatuur
0-4 ) 0°C (niet-condenserend
1. Package Contents
You should have received the following items inside of package:
- UPS Unit
- Quick Guide
- Power cable (only for the IEC-type model)
2. Product Overview
Front View:
Back View:
Standby UPS Quick Guide V. 1.1
Power Switch
UPS status indicator
Fault/Battery status indicator
AC input
Output receptacles
EN
82
1
CAUTION: NEVER connect a laser printer or scanner to the
UPS unit. This may cause the damage of the unit.
8 hours
3. Installation and Initial Startup
NOTE: Before installation, please inspect the unit. Be sure that nothing
inside the package is damaged.
Placement & Storage Conditions
Install the UPS in a protected area that is free of excessive dust and has adequate air flow.
Please place the UPS away from other units at least 20 cm to avoid interference. Do NOT
operate the UPS where the temperature and humidity is outside the specific limits. (Please
check the specs for the limitations.)
Connect to Utility and Charging
Plug in the AC input cord to the wall outlet. For the best
results, suggest to charge the battery at least 8 hours (8
Stunden) before initial use. The unit charges its battery
while connecting to the utility.
Connect the Loads
Plug in the loads to output receptacles on the rear panel of the UPS. Simply turn on the
power switch of UPS unit, then devices connected to the UPS will be protected by UPS unit.
Turn On/Off the Unit
Turn on the UPS unit by pressing the power switch. Turn off the UPS unit by pressing again
the power switch.
4. Important Safety Warning (SAVE THESE INSTRUCTIONS)
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity
controlled indoor area free of conductive contaminants. (See the specifications for the
acceptable temperature and humidity range.)
CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents and
avoid exposing the unit to direct sunlight or installing the unit near heat emitting appliances
such as space heaters or furnaces.
CAUTION! Do not attach non-computer-related items, such as medical equipment,
life-support equipment, microwave ovens, or vacuum cleaners to UPS.
CAUTION! Do not plug the UPS input into its own output.
CAUTION! Do not allow liquids or any foreign object to enter the UPS. Do not place beverages
or any other liquid-containing vessels on or near the unit.
CAUTION! In the event of an emergency, press the OFF button and disconnect the power
cord from the AC power supply to properly disable the UPS.
CAUTION! Do not attach a power strip or surge suppressor to the UPS.
CAUTION! If the UPS is with metal chassis, for safety purpose, grounding is a must during
UPS installation in order to reduce leakage current below 3.5mA.
Attention hazardous through electric shock. Also with disconnection of this unit from the
mains, hazardous voltage still may be accessible through supply from battery. The battery
supply should be therefore disconnected in the plus and minus pole at the quick connectors of
the battery when maintenance or service work inside the UPS is necessary.
CAUTION! Servicing of batteries should be performed or supervised by personnel
knowledgeable of batteries and the required precautions. Keep unauthorized personnel away
from batteries.
CAUTION! When replacing the batteries, use the same number and type of batteries.
CAUTION! Internal battery voltage is 12VDC. Sealed, lead-acid, 6-cell battery.
CAUTION! Do not dispose of batteries in a fire. The battery may explode. Do not open or
mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes.
CAUTION! Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
CAUTION! A battery can present a risk of electric shock and high short circuit current. The
following precaution should be observed before replacing batteries:
1) Remove watches, rings, or other metal objects.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not lay tools or metal parts on top of batteries.
5) Disconnect charging source prior to connecting or disconnecting batteries terminal.
.
2
3

Produkt Specifikationer

Mærke: FSP
Kategori: UPS
Model: Nano 600

Har du brug for hjælp?

Hvis du har brug for hjælp til FSP Nano 600 stil et spørgsmål nedenfor, og andre brugere vil svare dig


UPS FSP Manualer

FSP

FSP Nano 600 Manual

1 September 2024
FSP

FSP Nano 800 Manual

1 September 2024
FSP

FSP FP 600 Manual

31 August 2024
FSP

FSP FP 1500 Manual

31 August 2024
FSP

FSP NanoFit 800 Manual

31 August 2024
FSP

FSP Champ Tower 2K 2000VA Manual

31 August 2024
FSP

FSP Clippers 3k 3000VA Manual

31 August 2024
FSP

FSP FP 2000 Manual

31 August 2024
FSP

FSP NanoFit 600 Manual

31 August 2024
FSP

FSP iFP 600 Manual

31 August 2024

UPS Manualer

Nyeste UPS Manualer

APC

APC RBC150 Manual

2 April 2025
APC

APC RBC151 Manual

2 April 2025
APC

APC Symmetra LX 4kVA Manual

30 Marts 2025
APC

APC RBC145J Manual

29 Marts 2025
APC

APC RBC140J Manual

29 Marts 2025
APC

APC AP9922 Manual

29 Marts 2025
APC

APC RBC148 Manual

29 Marts 2025
Teltonika

Teltonika BAT120 Manual

30 Januar 2025
APC

APC BX1000M Manual

30 Januar 2025
APC

APC BX850 Manual

30 Januar 2025