Genelec 7040A Manual


Læs gratis den danske manual til Genelec 7040A (12 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Genelec 7040A, eller vil du spørge andre brugere om produktet?

Side 1/12
7040A Operating Manual
操作手册
Genelec 7040A Active Subwoofer
力 有 7040A
Introduction
Congratulation and thank you for choosing
Genelec!
Since 1978, Genelec has been guided by a
single idea – to make perfect active monitors
that deliver neutral and accurate sound in
every kind of acoustical environment. In
Genelecs quest for this ultimate goal, our
unrivalled commitment to research and
development has led us to continuously
develop innovative driver technology,
electronic circuitry, enclosure designs and
many more. Our design philosophy is based
on sustainability and environmental values,
where industrial design serves our product
acoustical performance.
Your Genelec product has been designed
and manufactured with care in our factory,
in Finland, using environmentally efficient
solutions to give you reliable operation over
many years.
Please take the time to read this manual.
Happy monitoring!
General Description
The Genelec 7040A is a very compact active
subwoofer for reproducing low frequencies.
The 7040A extends the bass reproduction
of Genelec 8010, 8020 and M030 active
monitors for stereo applications. Using the
7040A extends their frequency responses
down to 30 Hz (-6 dB).
Driver
The 7040A contains one 165 mm (6.5
in) magnetically shielded driver, housed
in Genelec Laminar Spiral EnclosureTM
(LSE™).
Bass Management
Balanced XLR connectors are used for the
audio inputs and outputs. There are two
input connectors and two outputs.
The bass management unit in the 7040A
subwoofer splits the input into low and
high frequency components at 85 Hz.
Frequencies below 85 Hz are reproduced
by the subwoofer. Frequencies above 85
Hz are directed via the subwoofer's output
connectors to the main monitors. The
subwoofer's outputs have the same level as
the inputs.
The subwoofer sensitivity can be adjusted
from +12 to -6 dBu to match the subwoofer
sound level easily with different monitors.
Two "BASS ROLL-OFF" switches provide
bass response adjustment to compensate
for the acoustical environment in three 2
dB steps. Two switches allow alignment
of subwoofer phase with the monitors.
The phase can be adjusted in 90 degree
increments between 0° and -270°.
Amplier
A Class D power amplifier produces 50
W output power with very low THD and
IM distortions. Driver overload protection
is included in the amplifier circuitry. The
a m p l i f i er a l s o i n c or p o r a t es t h e r m a l
overload and short circuit protections.
The power supply accepts mains voltages
from 100 to 240 VAC.
ISS Autostart
The 7040A is equipped with Intelligent
Si g na l Se n s i n g T M (ISS) aut om a t i c
start funct ion. ISS turns t he amplifier
to standby mode if no input signal has
been detected for one hour. The power
consumption in standby mode is less
than 0.5 watts. Playback automatically
resumes once an input signal is detected.
There is a slight delay in the automatic
powering up. In those environments where
the 7040A is required to be on all of the
time, the ISS function can be disabled
by setting the ISS DISABLE switch to
the ON position. Then the subwoofer
is c ont i n u ou s ly p owered a n d can be
turned off using the power switch on the
connector panel. The default position
from the factory is with "ISS DISABLE" in
the OFF position.
Installation
The subwoofer is supplied with a mains
cable and this operating manual. After
unpac king i nspec t the subwoofer for
possible damage in transport . Ensure
that the subwoofer and the monitors are
powered off before connecting cables.
Genelec 7040A Active Subwoofer


Produkt Specifikationer

Mærke: Genelec
Kategori: Subwoofer
Model: 7040A

Har du brug for hjælp?

Hvis du har brug for hjælp til Genelec 7040A stil et spørgsmål nedenfor, og andre brugere vil svare dig