Genelec 7382A Manual

Genelec Subwoofer 7382A

Læs gratis den danske manual til Genelec 7382A (8 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 106 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 53.5 anmeldelser. Har du et spørgsmål om Genelec 7382A, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Genelec 7382A
Smart Active Subwoofer
Operating Manual
7300 Series
Genelec 7382A Smart Active Subwoofer
Introduction
Thank you for choosing a Genelec product!
Fullling our customers' dreams by oering
people the most truthful sound reproduction
possible has been the source of our
enthusiasm since 1978. There´s already over
one million Genelec monitors around the
world - welcome to our story!
All Genelec monitors are designed, hand
assembled and individually tested at our
factory in Iisalmi, Finland. Our products are
designed to last for decades and we take
care that our customers receive excellent
support and technical services throughout
the lifetime of the products.
Please register your monitor at http://
www.community.genelec.com/. You will
receive an extended 5 year warranty for
spare parts. More information about our
service and technical support: http://www.
genelec.com/customer-service.
System Description
The Genelec 7382A SAM subwoofer is
designed for professional use and integrates
easily into environments based on analog or
digital interfacing. The 7382A even introduces
outstanding GLM™ features to the lower
octaves of monitoring systems based on
main speakers from a dierent vendor.
Multichannel AES/ EBU signals can be
monitored by using the 9301A multichannel
digital audio interface device connected to the
subwoofer.
The 7382A is intended to be calibrated
to the monitoring room acoustics using
the Genelec Loudspeaker Manager (GLM)
computer software. The GLM software
runs on Mac OS and Windows computers
and enables detailed acoustic calibration
permanently inside the subwoofer. It is
also possible to use the GLM software as
a monitoring management system for more
than 30 SAM monitors and subwoofers.
In its power save mode, the 7382A
consumes less than 1 W of power. Energy
saving Intelligent Signal Sensing (ISS) can
automatically put the subwoofer into a
power save mode when audio has been
absent for a selected time. Upon sensing an
input signal, the subwoofer wakes up to full
operation. The time before entering the ISS
power save mode can be congured using
the GLM software.
Package content
Each subwoofer is supplied with an
individually calibrated RAM-SW amplifier
unit. If several 7382A subwoofers are used
in the same system, it is very important
not to mix the subwoofer/amplier pairs. A
mains cable, a 10 m (33.3 ft) Speakon signal
cable, one 5 m GLM network cable and this
operating manual are also included.
Operating Environment
This subwoofer is designed for indoor use
only. The permissible ambient temperature
is 15-35 degrees Celsius (50-95°F) and
relative humidity 20 – 80% (noncondensing).
When the product has been stored or
transported in a cool environment and is
taken into a warm room, wait about one
hour before opening packing to prevent
condensation of humidity before connecting
to mains power.
Genelec Loudspeaker
Manager™ (GLM™) Software
And GLM User Kit
The GLM software gets the most out of
7382A and tailor-ts it to your room. GLM
is available for download free of charge at
www.genelec.com/glm. Check in from time
to time to take advantage of new features,
or consider using the cloud-based version.
A GLM User Kit comprising the necessary
hardware, including the GLM Adapter and
measuring microphone is needed for building
and operating the GLM network. This kit can
be purchased at certied Genelec dealers.
Connections
Before connecting signal cables, switch the
subwoofer amplier and monitors o.
Analog Inputs 1 and 2
The 7382A SAM subwoofer accepts
balanced XLR inputs. These are the outputs
typically provided in a console or a monitor
controller. The maximum balanced audio
signal level is +24 dBu.
LFE In
A dedicated XLR input is provided for the
analog LFE signal. The bandwidth for a signal
fed to the LFE input is 120 Hz. The LFE input
sensitivity can be set the same as for the
main channels or at +10 dB relative to the
main channels. This feature is set in the GLM
software.
IN Digital
One AES/EBU digital audio XLR input is
available on the 7382A subwoofer. This can
take a stereo digital audio signal.
Multichannel digital audio monitoring is
possible with the 9301A interface device.
The 9301A connects to the digital audio input
in the 7382A subwoofer and expands the
number of digital audio inputs to four XLR
digital audio inputs. This supports a 7.1 audio
system, including an LFE channel.

Produkt Specifikationer

Mærke: Genelec
Kategori: Subwoofer
Model: 7382A

Har du brug for hjælp?

Hvis du har brug for hjælp til Genelec 7382A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Subwoofer Genelec Manualer

Genelec

Genelec 7382A Manual

29 Juli 2024
Genelec

Genelec 7071A Manual

22 Juli 2024
Genelec

Genelec 7040A Manual

22 Juli 2024
Genelec

Genelec 7050 CPM Manual

13 April 2024
Genelec

Genelec 5041A Manual

10 Februar 2024
Genelec

Genelec 7370APM Manual

17 Januar 2024
Genelec

Genelec 7360APM Manual

16 Juni 2023
Genelec

Genelec F One Manual

14 Januar 2023

Subwoofer Manualer

Nyeste Subwoofer Manualer

Audison

Audison Prima APBMW S8-2.2 Manual

28 September 2025
Audison

Audison Prima APBMW S8-4.2 Manual

28 September 2025
Boston Acoustics

Boston Acoustics BT1100 Manual

25 September 2025
Boston Acoustics

Boston Acoustics Classic CPS 10Wi Manual

25 September 2025
Boston Acoustics

Boston Acoustics Classic CPS 8Wi Manual

24 September 2025
Boston Acoustics

Boston Acoustics Classic CPS 12Wi Manual

24 September 2025
Ground Zero

Ground Zero GZRW 250-D2 FLAT Manual

24 September 2025
Ground Zero

Ground Zero GZNW 38NEO-SPL Manual

24 September 2025
Ground Zero

Ground Zero GZIW 200 Manual

24 September 2025
Ground Zero

Ground Zero GZIW 250 Manual

24 September 2025