Gira 5561000 Manual

Gira Intercomsystem 5561000

Læs gratis den danske manual til Gira 5561000 (2 sider) i kategorien Intercomsystem. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Gira 5561000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

General safety instructions

These instructions are part of the product

and must remain with the end customer.

Necessary accessories

• System 106 intercom module (Item no.

5563 ..) with call-button module

(item no. 555. ..) or door station module

(Item no. 5565 9..).

• Video control device (item no. 1288 00).

• Gira home station video (e.g. surface-

mounted home station video Plus).

• System 106 surface-mounted housing,

1-gang to 5-gang (Item no. 5501 ...,

5502 ..., 5503 ..., 5504 ..., 5505 ...).

Accessories

• Power supply for door communication

DC 24 V 300 mA (item no. 1296 00).

Functional description

The camera module adds the "Video"

functionality to the Gira door

communication system 106.

Scope of supply

1 x System 106 camera module

1 x operating instructions

1 x video cable, short

1 x video cable, long

Ensure the package contents are complete

and undamaged. When filing complaints,

see "Warranty".

Device description

Front view

Electrical devices may only be

installed and connected by a

qualified electrician.

1 Glass front

2 Camera lens aperture

Rear view

Range of detection

Selecting installation site

Observe the following when selecting the

installation site:

•No back light: Do not point the camera

towards a strong back light source, such

as a street light or garden lights. Do not

expose lens to direct sunlight.

•Image background: Do not point camera

to extremely bright image backgrounds

with strong contrasts.

•Lighting: If there is additional lighting in

the entrance area, this should not shine

directly onto the camera lens from the

front (see "back light").

•Mounting height: 1.5 m

(recommendation).

•Angle of detection: 100°

1 Turn-type lock (4 x)

2 Rotary switch: Select image area (0-9)

3 Slot (2 x): System cable

4 Slot: Video cable

5 Glass front mounting (4 x)

1,5 m

1,0 m 3,0 m

100°

1,26 m

1,00 m

Drehknopf Position 9

80°

0,8 m

Drehknopf Position 0

1,00 m

60°

Camera heating

The camera has two internal heaters.

When local conditions cause rapid climatic

changes, the second heater is needed to

prevent the cover glass from fogging up.

If the second heater is used, an additional

power supply is required.

The first heater is automatically activated at

a temperature of < 6 °C and is deactivated

at +12 °C.

Night mode

Noise reduction mode (NR)

The NR mode prevents the camera image

from developing image noise in twilight

conditions.

Infrared illumination

In night mode, IR illumination enables a

glare-free illumination of the field of view.

When an additional power supply is used,

the effective range of the IR illumination

increases to 3 m.

High light compensation (HLC) function

The HCL function serves to invert bright

areas in night mode. Very bright areas are

inverted to black (e.g. car headlights).

Wide dynamic function (WD)

The WD functions automatically adapts the

camera image brightness ensuring that all

image areas are clearly visible. This makes

persons present in dark areas of the camera

image visible.

Installing the module

Automatic changeover to night

mode

For the duration of an active conversation,

the camera automatically switches to night

mode as from a brightness value of < 1 lx.

Night mode = b/w image and HLR is active.

Infrared illumination is only active if this

function has previously been set at the

home station.

Installing the module

The installation instructions for the

System 106 surface-mounted 1-gang to 5-

gang housing describes the following

working steps:

• Lock the module on the mounting

frame.

• Plug in the connection cable.

• Place terminating resistors.

Terminating resistor

From the 2-gang surface-mounted housing

up, there are always two terminating

resistors included.

The terminating resistors are always

connected to the first and last module on

the system cable.

10864530 40/16

System 106 camera

module

5561 000

Operating instructions

Starting up the camera module

When assigning a call button (see operating

instructions for door station and call-button

module), the camera module is

automatically logged in.

All components (System 106 module, home

stations, control devices etc.) must be

installed to successful start-up.previous

Configuring the module

Setting the image area

Fixed image sections (white) of the entire

image (grey) can be enlarged via the rotary

switch located on the rear. Position "0" =

State of delivery.

Rotary

knob posi-

tion

Range of detection

0 Central

1 Top centre

2 Top right

3 Right middle

4 Bottom right

Bottom

middle

6 Bottom left

7 Left middle

8 Top left

4:3,

compressed

Settings via other devices of the

door communication system

The following settings mare made directly

at the home station:

Brightness, contrast, colour and switch-on

time, IR illumination.

Changing the glass front

1. Open the housing and remove the

mounting frame.

2. Unlock the camera module and remove

it from the mounting frame.

3. Remove mounting screws and then

remove the glass front including seals.

4. Position new glass front with a new seal

and assemble in reverse order.

Technical data

1 Glass front

2 Seals

3 System 106 camera module

4 Mounting screws (4 x)

Power supply:

Via system (flat

ribbon cable, 10-

pin)

2 cameras via

Video control

device

Camera 3 and 4 via

external additional

power supply

(DC 24 V)

Power consumption

Stand-by mode

(T > 6 °C): 80 mW

Stand-by mode

(T < 6 °C): 1.2 W (heater 1 on)

Stand-by mode

(T < -2 °C): 3.1 W (additional

supply connected,

heater 1+ 2 on)

Camera active: 2.7 W

Connections: 2 x system (flat

ribbon cable, 10-

pole)

1 x video

(analogue)

Camera sensor

Type: CMOS 1/3"

Resolution: 2 MP

Visible range of

detection: 100°

Displayed detection

range (on screen): 105° (rotary switch

in position 9)

85° at normal 4:3

output

Colour system: PAL

Video signal resolution

(analogue CVBS): 50Hz/625 lines

Switchover threshold

from day to night mode: 1 lx

Light sensitivity

in B/W mode: 0.1 lx

Electronic shutter

speed: up to 1/60 000 s

Mounting height: Recommended:

1.50 m

Ambient temperature: -25 °C to +70 °C

Protection IP54

Dimensions (W x H): 106.5 x 106.5 mm

1 32 4

Warranty

The warranty is provided in accordance with

statutory requirements via the retailer.

Please submit or send faulty devices

postage paid and with an error description

to your sales representative (retailer/

installation company).

The salesperson will forward the devices to

the Gira Service Center.

Gira

Giersiepen GmbH & Co KG

Electrical installation systems

P.O. Box 1220

42461 Radevormwald

Phone: +49 (0) 2195 602 - 0

Fax: +49 (0) 2195 602 - 191

info@gira.de

www.gira.de

Produkt Specifikationer

Mærke:	Gira
Kategori:	Intercomsystem
Model:	5561000
Bredde:	106.5 mm
Højde:	106.5 mm
Produktfarve:	Sort
Produkttype:	Kameramodul
Driftstemperatur (T-T):	-25 - 70 °C
Materiale:	Glass, Metal
Monteringstype:	Overflade
Mærke kompatibilitet:	GIRA
Betragtningsvinkel:	100 °