Havis DS-DA-409 Manual

Havis Bilsæt DS-DA-409

Læs gratis den danske manual til Havis DS-DA-409 (2 sider) i kategorien Bilsæt. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Havis DS-DA-409, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

*END RESULT*

FOR ALTERNATIVE PLIER METHOD,

USE THESE 2 LOCATIONS FOR

CLAMPING TOGETHER.

CF29X, 30 PLASTIC CLIP

("L" STANDS FOR LAPTOP)

STEP 1. SELECTING YOUR CLIP

DETAIL A

SCALE 2 : 1

FEATURES THAT SNAP

INTO WINDOWS OF

UPPER BRACKET

STEP 2. INSERTING YOUR CLIP

(FOR USE WITH NIGHT EYES LIGHT,

REFER TO USB-POWERED NIGHT EYE

INSTALLATION INSTRUCTIONS)

USE THESE 2 HOLES

TO MOUNT LOWER BRACKET

STEP 3. ATTACHING SS.X TO DOCK

DS.CF29X/30 SIDE MEMBER

CF18X, 19 PLASTIC CLIP

("T" STANDS FOR TABLET)

USE TO MOUNT LOWER

BRACKET

DS.CF18X/19 SIDE MEMBER

DS.CF29X/30 OR CF18X/19

PLASTIC CLIP

TIGHTENING KNOB

LOWER BRACKET

#4 X 1" PLASTITE SCREW

TORQUE TO 8 IN-LBS

10%

(CF29X/30 ONLY)

#8 X 1-1/4"

SHEET METAL SCREW

TORQUE TO 8 IN-LBS

10%

(CF29X/30 ONLY)

STEEL BRACKET

8-32 X 1-3/4" FLAT HEAD

CAP SCREW (CF18X/19)

TORQUE TO 20 IN-LBS

10%

(SHEET 1/2)

HOLES USED FOR STYLUS

(STYLUS NOT INCLUDED)

PRODUCT I.D.

DATE

WEIGHT: (LBS)

SCREEN STIFFENER

ASSEMBLY

04-20-07

PRODUCT I.D.

DATE

WEIGHT: (LBS)

877-88-LEDCO

www.ledco.net

SS-0018-IS-C

PRODUCT DESCRIPTION

TO BE USED IN CONJUNCTION WITH

PANASONIC DS.CF18X, 19, 29X, 30 TOUGHBOOKS.

PRODUCT I.D.

DATE

WEIGHT: (LBS)

PRODUCT NAME

REV. DATE

DRAWING NUMBER:

SS.X

(DS.CF18X/19/29X/30)

HARDWARE KIT CONTENTS:

INSTALLATION INSTRUCTIONS:

SS.X MUST BE ATTACHED TO THE LEFT-HAND (DRIVER'S) SIDE OF THE

DOCKING STATION:

STEP 1 - SELECTING YOUR CLIP

- IF YOU WILL BE USING THE SS.X WITH A CF-18 OR CF-19 TABLET

COMPUTER, USE THE CLIP MARKED "T" FOR TABLET.

- IF YOU WILL BE USING THE SS.X WITH A CF-28, CF-29, OR CF-30 LAPTOP

COMPUTER, USE THE CLIP MARKED "L" FOR LAPTOP.

STEP 2. - INSERTING YOUR CLIP

AFTER SELECTING YOUR CLIP, INSERT THE CLIP BY HAND INTO THE

STEEL BRACKET AS SHOWN; CLIP WILL SNAP INTO WINDOWS OF THE

STEEL BRACKET. *BE CAREFUL NOT TO OVERBEND EITHER PIECE. THIS

COULD CAUSE BREAKAGE.* IF NECESSARY, USE A PAIR OF PLIERS WITH

SOFT, PROTECTED JAWS AND APPLY PRESSURE IN THE LOCATIONS

NOTED IN THE DIAGRAM TO ASSIST IN THE INSERTION.

STEP 3. - ATTACHING SS.X TO DOCK

REFER TO THE DIAGRAMS IN 3A AND 3B TO AID IN THIS PROCESS.

CF-18 AND CF-19 WITH "T" CLIP

REMOVE THE FLAT HEAD CAP SCREW FROM DOCK IN THE LOCATION

SHOWN IN 3A. ALIGN HOLE OF LOWER BRACKET OF SS.X WITH HOLE IN

SIDEMEMBER OF DOCK AND BEGIN THREADING THE 8-32 X 1-3/4" FHCS.

ALIGN RIDGES OF SIDEMEMBER WITH RIDGES OF LOWER BRACKET AND

TIGHTEN THE 8-32 X 1-3/4" FHCS TO 20 INCH-LBS

10%.

CF-28, CF-29, AND CF-30 WITH "L" CLIP

ALIGN COUNTER-SUNK HOLE OF THE LOWER BRACKET WITH THE

COUNTER-SUNK HOLE OF THE DOCK SIDEMEMBER AS SHOWN IN 3B;

INSERT #8 X 1-1/4" SCREW INTO LOWER BRACKET. TIGHTEN THE #8 X 1-

1/4" SCREW TO FASTEN THE LOWER BRACKET TO THE SIDEMEMBER.

NEXT, SCREW THE #4 X 1" PLASTITE SCREW THRU THE SMALL HOLE AT

THE FRONT OF THE LOWER BRACKET AND INTO THE SMALL HOLE IN THE

SIDEMEMBER OF THE DOCK. TIGHTEN BOTH FASTENERS TO 8 INCH-LBS

10%.

WARNING: ALL

LEDCO

PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER, IT

IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING

LEDCO

MOUNTING AND DOCKING

EQUIPMENT, TO INSURE THAT THE EQUIPMENT IN INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE

OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY

DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN

ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND

MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE

OPERATING VEHICLE.

0.38

01-22-08

Produkt Specifikationer

Mærke:	Havis
Kategori:	Bilsæt
Model:	DS-DA-409
Produktfarve:	Sort
Kompatible produkter:	CF31, CF30, CF29, CF28. DS-PAN-110, DS-PAN-100, DS-PAN-101, DS-PAN-102