Honeywell RTH111 Manual

Honeywell Termostat RTH111

Læs gratis den danske manual til Honeywell RTH111 (9 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Honeywell RTH111, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

RTH111 69-2061EFS 1/-01 11/09 8

Use the System switch to place the system in one of the following

modes.

•Cool: System is in Cooling mode.

•Off: System is off.

•Heat: System is in Heating mode.

CAUTION: EQUIPMENT DAMAGE HAZARD

Do not use Cooling mode when the outdoor temperature

is below 50 °F (10 °C).

Use the Fan switch to select the fan operation.

•Auto: The fan runs only when heating or cooling is actually taking

place (commonly used setting).

•On: The fan runs continuously. Use this setting for improved air

circulation or for more efficient air cleaning.

Press the S or T button once to display the setpoint temperature.

Press either button more than once to change the setpoint.

The ambient (measured) temperature is normally displayed. To view

the setpoint temperature, press either of the temperature adjustment

buttons once. The setpoint temperature will appear for five seconds.

Your thermostat has a feature that helps prevent damage to the

compressor of your air conditioning system. Because damage can

occur if the compressor is restarted too soon after shutdown, this

feature forces the compressor to wait five minutes before restarting.

During the wait time, the message Cool On flashes on the screen.

When the safe wait time has elapsed, the message stops flashing

and the compressor turns on.

Set the System switch to Off before removing the

batteries. Otherwise, the heating/cooling system could

remain activated even when batteries are removed.

Install two fresh AAA batteries when the low-battery icon flashes on

the screen. The icon appears for 60 days before the batteries are

depleted. Replace batteries once a year, or when you will be away for

more than a month.

The settings are stored in non-volatile (permanent) memory and are

thus saved when the thermostat is without batteries.

nn 1.

System switch

Fan switch

Temperature

adjustment buttons

1 When Cool On is flashing, this means the compressor protection is engaged (see

section 1.6).

Temperature

System status

• Cool On: Cooling is

activated. 1

• Heat On: Heating is

activated.

Low-battery warning

Setpoint indicator

Appears when the

setpoint temperature

is displayed.

oo 2.

pp 3.

Screen is blank. • Ensure two fresh AAA alkaline batteries are

correctly installed.

Temperature settings

cannot be changed.

• The System switch is off.

• You are setting the temperatures outside

their allowable ranges:

• Heat: 40 °F to 90 °F (4.5 °C to 32 °C).

• Cool: 50 °F to 99 °F (10 °C to 37 °C).

Cool On is flashing. • The compressor protection delay has been

activated. Cooling will not be activated until

the delay ends (maximum of five minutes).

HI appears on the

screen.

• The ambient (measured) temperature is

above 122 °F (50 °C).

LO appears on the

screen.

• The ambient (measured) temperature is

below 32 °F (0 °C).

E1 appears on the

screen.

• The temperature sensor circuit is opened.

Replace the thermostat.

E2 appears on the

screen.

• The temperature sensor circuit is shorted.

Replace the thermostat.

69-2061EFS-01

RTH111 69-2061EFS 2/-01 11/09 8

Power Supply

• 2 AAA batteries

Maximum Load

• 1 A @ 24 VAC per output

Temperature Ranges

• Heat: 40 °F to 90 °F (4.5 °C to 32 °C)

• Cool: 50 °F to 99 °F (10 °C to 37 °C)

Operating Ambient Temperature

• 32 °F to 122 °F (0 °C to 50 °C)

Shipping Temperature

• -40 °F to 130 °F (-40 °C to 55 °C)

Operating Relative Humidity

• 5% to 90% (non-condensing)

Physical Dimensions (H x W x D)

• 4.7” x 2.9” x 1.1” (120 mm x 74 mm x 28 mm)

Honeywell warrants this product, excluding battery, to be free from defects in

the workmanship or materials, under normal use and service, for a period of

one (1) year from the date of purchase by the consumer. If at any time during

the warranty period the product is determined to be defective or malfunctions,

Honeywell shall repair or replace it (at Honeywell's option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to the place

from which you purchased it, or

(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will

make the determination whether the product should be returned to the

following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885

Douglas Dr N, Golden Valley, MN 55422, or whether a replacement

product can be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty

shall not apply if it is shown by Honeywell that the defect or malfunction was

caused by damage which occurred while the product was in the possession of

a consumer.

Honeywell's sole responsibility shall be to repair or replace the product within

the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY

LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY,

FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR

ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the

exclusion or limitation of incidental or consequential damages, so this

limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL

MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED

WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO

THE ONE-YEAR DURATION OF THIS WARRANTY. Some states do not

allow limitations on how long an implied warranty lasts, so the above limitation

may not apply to you.

This warranty gives you specific legal rights, and you may have other rights

which vary from state to state.

If you have any questions concerning this warranty, please write Honeywell

Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-

800-468-1502. In Canada, write Retail Products ON15-02H, Honeywell

Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario

M1V4Z9.

If you have any questions regarding your thermostat, please go to

http://yourhome.honeywell.com, or call Honeywell Customer Care

toll-free at 1-800-468-1502.

;

6.

Printed in USA

Produkt Specifikationer

Mærke:	Honeywell
Kategori:	Termostat
Model:	RTH111

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell RTH111 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat Honeywell Manualer

Honeywell RTH21B Manual

14 Juni 2025

Honeywell off Manual

15 Januar 2025

Honeywell Round Wireless Modulation - Y87RF1004 Manual

15 Januar 2025

Honeywell Day Night Round T8700A Manual

4 Oktober 2024

Honeywell Round on-off T87G1006 Manual

4 Oktober 2024

Honeywell TH2210DV1006/U Manual

1 Oktober 2024

Honeywell T822L1000/U Manual

29 September 2024

Honeywell CT53K1006/E1 Manual

27 September 2024

Honeywell TH6320WF2003/U Manual

23 September 2024

Honeywell TG512A1009 Manual

22 September 2024

Termostat Manualer

Nyeste Termostat Manualer

Tado Bridge X Manual

16 Juni 2025

Carrier ComfortVu Manual

16 Juni 2025

Mainstreet Equipment GMC-12 Manual

15 Juni 2025

Tado Wireless Temperature Sensor X Manual

9 Juni 2025

Fantini Cosmi CH123E Manual

26 Marts 2025

Netatmo Smart Radiator Valve Manual

26 Februar 2025

Netatmo Smart Thermostat Manual

26 Februar 2025

Rose LM TER-9 Manual

5 Februar 2025

Rose LM TH-H Manual

1 Februar 2025

Danfoss React M30x1.5 Manual

1 Februar 2025