Hudson Valley Verona Beach 7614 Manual

Hudson Valley Lys Verona Beach 7614

Læs gratis den danske manual til Hudson Valley Verona Beach 7614 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Hudson Valley Verona Beach 7614, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
FIXTURE INSTALLATION
1. Attach the CROSSBAR (1) onto the junction box using the MOUNTING SCREWS (2). This fixture is designed to
be mounted on standard round or octagon junction box. The junction box must be securely mounted to the
structure of the building.
2. Open the end link on the CHAIN (8) and attach to the loop on the FIXTURE ASSEMBLY (10). Hang the
FIXTURE ASSEMBLY (10) on the CHAIN (8) at your desired height, and remove excess CHAIN.
3. Feed the wire through the CHAIN (8) , SCREW COLLAR (9), CANOPY (7), SCREW COLLAR LOOP (6),
NIPPLE (5), and CROSSBAR (1), and screw the NIPPLE (5) onto the CROSSBAR (1).
4. Open the top link on the CHAIN (8), and Hang the FIXTURE ASSEMBLY (10) to the SCREW COLLAR LOOP
(6).
5. Cut off excess wire, and strip the insulation off the end of the leads.
6. Attach the Ground wire (Green) to the ground inside the junction box (Generally green or bar copper wire) or
the GROUND SCREW (3) on the MOUNTING PLATE (1). NEVER CONNECT GROUND WIRE TO "HOT"
WIRE! FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
7. Connect the white fixture lead to the neutral (Generally white) wire in the outlet box. Fasten the wires together
with an approved fastener (WIRE NUT) (4). Starting 1" below the fastener, tightly wrap the connection with
electrical tape so that the connections seals the end of the fastener. MAKE SURE THERE ARE NO EXPOSED
WIRE OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT CIRCUIT!
8. Connect the black fixture leads to the hot (Generally black) wire in the junction box. Fasten the joined wires
same as previous step. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW THIS
COULD RESULT IN SERIOUS INJURY OR DEATH!
9. Lift the SHADE (11) up so that the SHADE HOLDER (14) into SHADE (11), screw the RING (11) and secure
with the HEADLESS SCREW (12) by using supplied ALLEN KEY TOOLING(13) .
10. Screw the BULB (16) up into the SOCKET of the fixture.THE 7614 IS RATED FOR 60 WATT LAMP. THE 7616
IS RATED FOR 60 WATT LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
11. Restore power to the outlet at the breaker or fuse box.
VERONA BEACH
7614, 7619
INSTALLATION INSTRUCTIONS
WARNING/CAUTION
· DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS
COMPLETELY BEFORE STARTING INSTALLATION.
· TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL
APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND
MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED
FACTORY TRAINED TECHNICIAN.
· CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS
AFTER USE.
· REMOVE THE FIXTURE, PARTS AND PARTS BAG(S) FROM THE CARTON. BEFORE DISCARDING THE
CARTON, DOUBLE CHECK TO MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR
TO INSTALLATION FOR ANY DAMAGE TO THE FIXTURE.
· DIMMING: THE FIXTURE CAN BE CONTROLLED BY A WALL DIMMING DEVICE. ONLY USE
TRIAC/ELECTRONIC DIMMER. MAKE SURE THE CARTON IS MARKED FOR USE WITH LED COMPACT
FLUORESCENT-INCANDESCENT LIGHT SOURCE ONLY. THESE CAN BE PROVIDED BY YOUR LOCAL
ELECTRICAL DISTRIBUTOR, HOME CENTER, OR HARDWARE STORE.
· PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS
www.hvlgroup.com
Questions? We're here to help!
Contact us at CustomerService@hvlgroup.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ITEM DESCRIPTION PART NUMBER
1
MOUNTING PLATE
HDW-007610
2
MOUNTING SCREW HDW-007610
3
GROUND SCREW
HDW-007610
4
WIRE NUT HDW-007610
5
1/4 NIPPLE
HDW-007610
6
SCREW COLLAR LOOP
HDW-007610
7
CANOPY
CPY-007614
8
CHAIN CHN-007614
9
SCREW COLLAR
SCL-007614
10
FIXTURE ASSEMBLY
FAS-007614, FAS-007619
11
RING RNG-007614
12
HEADLESS SCREW SCR-007614-H
13
ALLEN KEY TOOLING MIS-007614
14
SHADE HOLDER SHD-007614-H
15
SHADE
SHD-007614, SHD-007619
16
BULB NOT INCLUDED

Produkt Specifikationer

Mærke: Hudson Valley
Kategori: Lys
Model: Verona Beach 7614

Har du brug for hjælp?

Hvis du har brug for hjælp til Hudson Valley Verona Beach 7614 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lys Hudson Valley Manualer

Hudson Valley

Hudson Valley Glimmer 5351-AGB Manual

7 December 2025
Hudson Valley

Hudson Valley Verona Beach 7614 Manual

7 December 2025
Hudson Valley

Hudson Valley Southold 3938-AGB Manual

7 December 2025
Hudson Valley

Hudson Valley Lina BKO252-AGB Manual

6 December 2025
Hudson Valley

Hudson Valley Times Square 3806-AGB Manual

30 Juni 2025
Hudson Valley

Hudson Valley Times Square 3810-AGB Manual

30 Juni 2025
Hudson Valley

Hudson Valley Amboy 1504-AGB Manual

29 Juni 2025
Hudson Valley

Hudson Valley Collins 2938-PN Manual

29 Juni 2025
Hudson Valley

Hudson Valley Woodlawn 1728 Manual

28 Juni 2025
Hudson Valley

Hudson Valley Ovid 1920-AGB Manual

27 Juni 2025

Lys Manualer

Nyeste Lys Manualer

Forte Lighting

Forte Lighting 2765-01 Manual

8 December 2025
Forte Lighting

Forte Lighting 2679-01 Manual

7 December 2025
Ansmann

Ansmann Survival TS1000RF Manual

7 December 2025
Forte Lighting

Forte Lighting 2746-01 Manual

7 December 2025
Forte Lighting

Forte Lighting 2747-01 Manual

7 December 2025
Lightcraft

Lightcraft Shineball XL Manual

7 December 2025
Forte Lighting

Forte Lighting 5748-03 Manual

7 December 2025
Schonbek

Schonbek Priscilla BC7110N-44PBZ Manual

7 December 2025
Forte Lighting

Forte Lighting 2757-03 Manual

7 December 2025
Forte Lighting

Forte Lighting 2757-01 Manual

7 December 2025