Icom IC-756PRO Manual

Icom Modtager IC-756PRO

Læs gratis den danske manual til Icom IC-756PRO (56 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Icom IC-756PRO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/56

INSTRUCTION MANUAL

HF/50 MHz

ALL MODE TRANSCEIVER

i756PRO

IMPORTANT

READ THIS INSTRUCTION MANUAL

CAREFULLY before attempting to operate the

transceiver.

SAVE THIS INSTRUCTION MANUAL. This

manual contains important safety and operating in-

structions for the IC-756PRO.

EXPLICIT DEFINITIONS

RWARNING HIGH VOLTAGE! NEVER attach

an antenna or internal antenna connector during trans-

mission. This may result in an electrical shock or burn.

R NEVER apply AC to the [DC13.8V] jack on the

transceiver rear panel. This could cause a ﬁre or ruin

the transceiver.

RNEVER apply more than 16 V DC, such as a 24 V

battery, to the [DC13.8V] jack on the transceiver rear

panel. This could cause a ﬁre or ruin the transceiver.

RNEVER let metal, wire or other objects touch any

internal part or connectors on the rear panel of the

transceiver. This may result in an electric shock.

NEVER expose the transceiver to rain, snow or any

liquids.

AVOID using or placing the transceiver in areas with

temperatures below –10°C (+14°F) or above +60°C

(+140°F). Be aware that temperatures on a vehicle’s

dashboard can exceed 80°C (+176°F), resulting in per-

manent damage to the transceiver if left there for ex-

tended periods.

AVOID placing the transceiver in excessively dusty en-

vironments or in direct sunlight.

AVOID placing the transceiver against walls or putting

anything on top of the transceiver. This will obstruct

heat dissipation.

Place unit in a secure place to avoid inadvertent use by chil-

dren.

During mobile operation, DO NOT operate the trans-

ceiver without running the vehicle’s engine. When

transceiver power is ON and your vehicle’s engine is

OFF, the vehicle’s battery will soon become exhausted.

Make sure the transceiver power is OFF before start-

ing the vehicle. This will avoid possible damage to the

transceiver by ignition voltage spikes.

During maritime mobile operation, keep the transceiver

and microphone as far away as possible from the mag-

netic navigation compass to prevent erroneous indica-

tions.

BE CAREFUL! The heatsink will become hot when

operating the transceiver continuously for long periods.

BE CAREFUL! If a linear amplifier is connected, set

the transceiver’s RF output power to less than the lin-

ear ampliﬁer’s maximum input level, otherwise, the lin-

ear ampliﬁer will be damaged.

Use Icom microphones only (supplied or optional).

Other manufacturer’s microphones have different pin

assignments, and connection to the IC-756PRO may

damage the transceiver.

PRECAUTIONS

Versions of the IC-756PRO which display the “CE”

symbol on the serial number seal, comply with the

European harmonised standard ETS300 684

(EMC product standard for Commercially Available

Amateur Radio Equipment).

WORD

WARNING

CAUTION

NOTE

DEFINITION

Personal injury, fire hazard or electric

shock may occur.

If disregarded, inconvenience only.

No risk of personal injury, fire or

electric shock.

Equipment damage may occur.

Spurious may be received near the following frequencies.

These are made in the internal circuit and does not indicate a

transceiver malfunction:

6.144 MHz, 8.000 MHz,

12.288 MHz, 12.890 MHz (when spectrum scope is ON),

18.433 MHz, 24.573 MHz

Produkt Specifikationer

Mærke:	Icom
Kategori:	Modtager
Model:	IC-756PRO

Har du brug for hjælp?

Hvis du har brug for hjælp til Icom IC-756PRO stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Icom Manualer

14 Oktober 2024

5 Oktober 2024

5 Oktober 2024

5 Oktober 2024

26 September 2024

22 September 2024

20 September 2024

19 September 2024

16 September 2024

10 September 2024

Modtager Manualer

Nyeste Modtager Manualer

DS18 SMD-300.4AB Manual

16 Juni 2025

DS18 SMD-3000.1D Manual

16 Juni 2025

DS18 GEN-X G3600.1D Manual

16 Juni 2025

DS18 HYDRO NXL-X1000.1D Manual

16 Juni 2025

DS18 SMD-200.4AB Manual

16 Juni 2025

DS18 GEN-X G1000.4D Manual

16 Juni 2025

DS18 GEN-X G4000.5D Manual

16 Juni 2025

Diamond Audio MICRO85U Manual

16 Juni 2025

Planet Audio MB2000.1D Manual

16 Juni 2025

Planet Audio MB2200.5D Manual

16 Juni 2025