Icom IP110H Manual

Icom Ikke kategoriseret IP110H

Læs gratis den danske manual til Icom IP110H (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Icom IP110H, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

– – 1

Thank you for choosing this Icom product. READ

ALL INSTRUCTIONS carefully and completely

before using this product.

INSTRUCTION MANUAL

PROGRAMMING SOFTWARE

CS-IP110H

The CS-IP110H is an application software to setup the IP110H from your PC.

To use the software, a computer system and some items described in “System requirements” are required.

LThe instructions are based on using Microsoft Windows 10.

•Operating System (OS)

Microsoft Windows

11 (64bit)

Microsoft Windows 10 (32/64bit)

LExcept for Windows on ARM.

•USB port

A USB 1.1, 2.0, or 3.0 port

LIcom is not responsible for problems using a PC with

an OS other than one of the above installed.

•Cables

The USB cable supplied with the transceiver

OPC-478UC or OPC-478UC-1 programming cable

+ OPC-1655 programming adapter cable

System requirements (As of September 2024)

NOTE for the OPC-478UC :programming cable

•The OPC-478UC is not usable with Windows 11.

•Conrm your OPC-478UC has a “B” on its

label. Only the cables with a “B” are usable with

Windows 10.

Operation notes

•The contents of this sheet, the software associated

with the CS-IP110H, and the appearance of the

CS-IP110H are all subject to change without notice.

•The displays, indications, or operations may differ

slightly, depending on your system settings, type of

OS, and its service pack level.

Procedure outline

To setup from a PC, rst follow the steps described below.

Step 1 Preparations

Conrm the system requirements in these instructions.

Step 2 CS-IP110H installation

Install the CS-IP110H following these instructions.

Step 3 USB driver installation

Install the USB driver following these instructions and the optional programming cable’s installation guide.

Step 4 Connection

Connect the transceiver and a PC following these instructions, and then turn ON the transceiver.

Produkt Specifikationer

Mærke:	Icom
Kategori:	Ikke kategoriseret
Model:	IP110H

Har du brug for hjælp?

Hvis du har brug for hjælp til Icom IP110H stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Icom Manualer

Icom ST-ID50A Manual

1 Juli 2025

Icom ST-4003A Manual

1 Juli 2025

Icom CT-M500 Manual

27 Juni 2025

Icom OPC-478UD Manual

26 Juni 2025

26 Juni 2025

26 Juni 2025

26 Juni 2025

26 Juni 2025

Icom OPC-2350LU Manual

26 Juni 2025

Icom IC-F6400D Manual

21 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Adventys MO4NL Manual

1 November 2025

Adventys GL 3000 DIR Manual

1 November 2025

Dahua Technology HAC-HFW2241T-Z-A-VP-0622 Manual

1 November 2025

Moultrie Edge Solar Manual

1 November 2025

Dahua Technology XVR5416L-4KL-I2 Manual

1 November 2025

Dahua Technology PFM802P Manual

1 November 2025

EtherWAN EX94000 Manual

1 November 2025

EtherWAN EX87000 Manual

1 November 2025

Techno Line TR-40315 Manual

1 November 2025

Dahua Technology HAC-HFW1239TLM-A-LED Manual

1 November 2025