Ikan RB5-3PT-KIT Manual

Ikan Lys RB5-3PT-KIT

Læs gratis den danske manual til Ikan RB5-3PT-KIT (4 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Ikan RB5-3PT-KIT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

www.ikancorp.com

713.272.8822

CHECKED BY

QUICKSTART GUIDE

RB5-3PT-KIT

Kit with 3x Rayden Bi-Color Half x 1 LED Soft Light

What’s Included

3 x Half x 1 Bi-Color LED Light

3 x Heavy Duty Stand

3 x Gold Mount Battery Plate

3 x V-Mount Battery Plate

1 x Light Kit Bag (ID-500-3L)

1 x Stand Bag

Getting to know your RAYDEN lights

PRECAUTIONS:

• Keep the ﬁxture away from water and all ﬂammable gases or liquids.

• Use only the recommended batteries.

• Handle the unit with care.

• DO NOT attempt to disassemble or repair the unit without ﬁrst contacting service department at

ikancorp.com.

• Keep the unit clean and free of dust. The unit can be cleaned with a soft dry cloth.

• Use only parts provided by the manufacture.

• Always use caution when plugging in the ﬁxture.

Mounting the Rayden to a Stand:

The Rayden LED Light comes with a pre-installed yoke and combo mount. This allows the ﬁxture to easily

sit and adjust on any stand. The 30° yoke gives the light free-range motion without obstructions. The Baby

" and Junior 1-

" Combo Pin allows the user a wide range of stands. The light can be mounted either

horizontally or vertically on a

" baby pin.

Power the LEDs:

The Rayden light comes with an included AC power supply and 6 foot cable. This allows the user to plug

into any standard 120-240v electrical outlet. The Rayden LED light can be powered from either an AB

Mount pro battery, or a V-Mount battery. The ﬁxture comes standard with either AB-Mount or V-Mount

plates. The plates can be easily removed and replaced for the type of batteries that are available.

Adjusting the Color & Brightness of the Light:

The Rayden LED light is controlled by the large yellow knob on the rear of the ﬁxture. The knob was

designed with the idea that it could be reached and adjusted when the light is up on a stand. The knob

has three push settings.

1. The default setting is the brightness from 10%-100% brightness.

2. By pressing in on the knob the color temperature can be adjusted. (Bi-Color Lights)

Changing the Pro Battery Plate

Adding or removing the pro battery plate on the back of your ﬁxture can be easily achieved.

NOTE: The ﬁxture comes pre-installed with the Gold-Mount battery plate.

The process starts with the removal of the four screws on the four corners of the plate. Once the screws

are removed, separate the plate from the back of the ﬁxture. Unplug the 2-pin connector from the ﬁxture.

Store the screws and the Gold-Mount in a safe place.

Reattaching the V-Mount plate is a simple process. Plug the wired 2-pin connector into the ﬁxture where

we just unplugged the Gold-Mount plate at the back of the light. Orient the holes on the plate to match up

with the screw holes on the back of the ﬁxture. Using the screws supplied with the V-Mount plate, screw

in the plate until it is snug against the back of the ﬁxture. Do not over-tighten the screws.

You’re now ready to install your battery to the V-Mount plate.

Produkt Specifikationer

Mærke:	Ikan
Kategori:	Lys
Model:	RB5-3PT-KIT
Antal pr. pakke:	3 stk
Produktfarve:	Sort
Pakkevægt:	20400 g
Husmateriale:	Plast
Strømforbrug (maks.):	150 W
Strømkilde type:	Vekselstrøm
Strålevinkel:	50 °
Farvetemperatur (maks.):	5600 K
Lys output (maks.):	1218 lm
Antal lysdioder:	6082
Farve-gengivelse (CRI):	95