In Lite Spike Manual


Læs gratis den danske manual til In Lite Spike (2 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6 anmeldelser. Har du et spørgsmål om In Lite Spike, eller vil du spørge andre brugere om produktet?

Side 1/2
SPIKE & SPIKE 22
in-lite introduces the SPIKE and SPIKE 22. These
newcomers to the accessory range make it possible
to install ground lights like the FUSION, HYVE and
FLUX easily and securely in loose surfaces like
grass and gravel. The ground lights are easily to
place using the SPIKE ground spike. The SPIKE and
spotlight are then pushed into the desired location
in the yard. To make it even easier to install a spot
with the SPIKE, it is advisable to first dig or drill
an appropriately sized hole first. The SPIKE can
then easily be pushed into place by hand and the
hole filled with sand, gravel or soil.
The result: a securely placed
in-lite ground spot.
SPIKE & SPIKE 22
SPIKE
suitable for use with FUSION, HYVE, FLUX and PUCK
67 mm x 215 mm / 2.67 inch x 8.46 inch (diameter x height)
nylon casing
suitable for installing in gravel, soil or grass
SPIKE 22
suitable for use with FUSION 22 RVS, HYVE 22 RVS
and PUCK 22
28 mm x 170 mm / 1.10 inch x 6.69 inch (diameter x height)
nylon casing
suitable for installing in gravel, soil or grass
ACCESSORY
EASY TO USE
Pull the cable through
the duct and push the fixture
into the hole in the SPIKE.
Cable duct


Produkt Specifikationer

Mærke: In Lite
Kategori: Lettelse
Model: Spike

Har du brug for hjælp?

Hvis du har brug for hjælp til In Lite Spike stil et spørgsmål nedenfor, og andre brugere vil svare dig