Intermatic T1905P Manual

Intermatic bryter T1905P

Læs gratis den danske manual til Intermatic T1905P (1 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Intermatic T1905P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

MODEL: T1905P

PROGRAM TIME SWITCH

IN TYPE 3R DUSTPROOF/RAINPROOF ENCLOSURE

SUITABLE FOR POOL EQUIPMENT CONTROL IF

INSTALLED 5 FT.

OR MORE FROM EDGE OF POOL

FOR UP TO 48 TIMING OPERATIONS

SWITCH RATING: 20 AMP. 125-480 VOLTS A.C. 1/2 HP-125V 1 HP-250V.

WIRING INSTRUCTIONS

This Time Switch can be wired to control two circuits as Single Pole

Double throw, or to control one circuit as Single Pole Single Throw. Either

normally open (NO) or normally closed (NC). To wire switch see wiring

diagram above.

TO PROGRAM TIME SWITCH, Depress tripper(s) into dial at desired

time(s) operation(s) is/are required.

• ON TIME: First tripper turns on the load for 16-20 minutes. Each

additional tripper will lengthen the on time by 15 minutes.

• OFF TIME: First tripper in raised position turns off the load for

10-14 minutes.Each additional space will lengthen the of time by 15

minutes.

SET TIME-OF-DAY: Turn dial in clockwise direction only and align

the exact time-of-day (the time now when switch is being put into

operation) to the “TIME” arrow on insulator.

TIME

DIAL

INSULATOR

MANUAL

LEVER

CAP

NUTS

CLOCK

MOTOR

SUPPLY

NORMALLY CLOSED CIRCUIT

NORMALLY OPEN CIRCUIT

FIG. 1 WIRING DIAGRAM

CLOCK

COM.

N.C.

N.O.

N.C.

LOAD

NO.

LOAD

OPERATING INSTRUCTIONS

TO CONTROL LOADS MANUALLY, Move manual lever (See Figure

1) up. This lever will close normally open circuit and open the normally

closed circuit. To return, to automatic control, move lever back to its

original position .

IN CASE OF POWER FAILURE, reset dial. See step (2) of programming

instructions.

INTERMATIC INCORPORATED

SPRING GROVE, ILLINOIS 60081-9698

158TS10969

CLOCK MOTOR: 125 VOLTS - 60 HZ.

CLOCK MOTOR VOLTAGE AND CYCLE MUST BE AS SPECIFIED. TO ORDER

REPLACEMENT, INDICATE PART NO. (WG--) ON MOTOR COVER.

LR3730

Produkt Specifikationer

Mærke:	Intermatic
Kategori:	bryter
Model:	T1905P

Har du brug for hjælp?

Hvis du har brug for hjælp til Intermatic T1905P stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

bryter Intermatic Manualer

Intermatic T1871BR Manual

29 Juli 2025

Intermatic T1471BR Manual

29 Juli 2025

Intermatic T106M Manual

29 Juli 2025

Intermatic T1471BCR Manual

29 Juli 2025

Intermatic T1976 Manual

29 Juli 2025

Intermatic DTAV40Q Manual

19 Juli 2025

Intermatic T7401B Manual

15 Juni 2025

Intermatic T103M Manual

10 Juni 2025

Intermatic T106R Manual

9 Juni 2025

Intermatic T1905E Manual

9 Juni 2025

bryter Manualer

Nyeste bryter Manualer

Emko Trans Manual

7 September 2025

BZBGear BG-MKVM41R Manual

6 September 2025

Speaka SP-HSW-300 Manual

6 September 2025

Speaka SP-KVM-340 Manual

6 September 2025

Alcatel OmniSwitch 6450 Manual

6 September 2025

Raritan T1700-LED Manual

4 September 2025

Gefen EXT-MFP Manual

4 September 2025

Generac RTSW100K3 Manual

3 September 2025

Generac RTSW100J3 Manual

3 September 2025

Generac RTSW400A3 Manual

3 September 2025