JBL Power P180.2 Manual

JBL Modtager Power P180.2

Læs gratis den danske manual til JBL Power P180.2 (8 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om JBL Power P180.2, eller vil du spørge andre brugere om produktet?

Side 1/8
Power Series Amplifiers
P80.2, P180.2, P80.4, BP150.1, BP300.1, BP600.1, BP1200.1 Owner’s Manual
GENUINE JBL
Before drilling or cutting holes, use a
utility knife to remove unwanted fabric
or vinyl to keep material from snagging
in a drill bit.
When routing cables, keep input-signal
speaker wires.
When making connections, make
certain they are secure and properly
insulated.
If the amplifiers fuse must be replaced,
use only the same type and rating as
that of the original. Do not substitute
another kind.
2
Installation Warnings and Tips
Always wear protective eyewear when
using tools.
Turn off all audio systems and other
electrical devices before you start.
Disconnect the () negative lead from
your vehicles battery.
Check clearances on both sides of a
planned mounting surface before
drilling any holes or installing any
screws. Remember that the screws can
extend behind the surface.
At the installation sites, locate and
make a note of all fuel lines, hydraulic
brake lines, vacuum lines and electrical
wiring. Use extreme caution when
cutting or drilling in and around these
areas.
Thank you for purchasing a JBL Power
Series amplifier. In order that we may
better serve you should you require
warranty service for your new amplifier,
please retain your original purchase
receipt and return the enclosed warranty
registration card.
Warning: Playing loud music in an auto-
mobile can permanently damage your
hearing as well as hinder your ability to
hear traffic. We recommend listening at
low levels while driving your car. JBL
accepts no liability for hearing loss, bodily
injury or property damage resulting from
use or misuse of this product.
Important: Installation of automotive
stereo components can require extensive
experience in performing a variety of
mechanical and electrical procedures.
Although these instructions explain, in a
general sense, how to install Power
Series amplifiers, they may not show
the exact installation methods for your
particular vehicle. If you feel you lack the
necessary tools or experience, ask your
authorized JBL car-audio dealer about
professional installation options.
Choosing a Location and
Mounting the Amplifier
Amplifiers need air to stay cool. Suitable
locations are under a seat (provided the
amplifier doesnt interfere with the seat
adjustment mechanism), in the trunk or
in any other location which provides
enough air for the amp to cool itself. Do
not mount the amplifier with the heat
sink facing downward, as this makes
convection cooling of the amplifier
impossible.
Mount the amplifier so that it is not
damaged by the feet of back-seat pas-
sengers or shifting cargo in the trunk.
Mount the amplifier so that it remains
dry never mount an amplifier outside
the car or in the engine compartment.
Using the amplifier as a template, mark
the location of the mounting holes on
the mounting surface, drill pilot holes,
and attach the amplifier to the mounting
surface with screws. Make sure the
amplifier is mounted securely.


Produkt Specifikationer

Mærke: JBL
Kategori: Modtager
Model: Power P180.2

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL Power P180.2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Modtager JBL Manualer

JBL

JBL DCR 600 II Manual

24 Juli 2025
JBL

JBL GTR-1001 Manual

24 Juli 2025
JBL

JBL AVR480 Manual

23 Juli 2025
JBL

JBL DCR 600 Manual

23 Juli 2025
JBL

JBL AVR580 Manual

23 Juli 2025
JBL

JBL M3 Manual

21 Juli 2025
JBL

JBL M1 Manual

21 Juli 2025
JBL

JBL DA850 Manual

21 Februar 2025
JBL

JBL DA1650 Manual

21 Februar 2025

Modtager Manualer

Nyeste Modtager Manualer