Jensen MPQ914 Manual

Jensen Modtager MPQ914

Læs gratis den danske manual til Jensen MPQ914 (1 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Jensen MPQ914, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

With the unit on, to display clock time. Press andlong press DISP

hold DISP until the hours or minutes begin to flash, then

release. Rotate the to adjust the time.volume knob

Long press to finish the clock setting.DISP

,then press DISP

Touch PS to recall each preset station that has been

stored in memory for each band.

(Available with the Dual Smart Remote App only)

Wireless Charging Operation

Preparation

Pairing a New

Device

Bluetooth®

Before using a Bluetooth device, it must be paired and

connected. Ensure that Bluetooth is activated on your

device before beginning the pairing process.

The head unit broadcasts the pairing signal constantly

when no devices are connected. Complete the pairing

sequence from your Bluetooth device. Refer to the

owner’s manual for your device for more details.

The device name is "Jensen Media Player"

Streaming Audio

Troubleshooting

•Press

to skip to the next available audio track.

•Press

to skip to the previous audio track.

•Press

to toggle between play and pause during

playback.

Note: The head unit can be in any mode of operation

when pairing is performed.

The head unit supports A2DP wireless streaming audio

from a Bluetooth mobile device directly to your head unit.

The following functions can be used to control the music:

Operation

The Jensen Smart App is the ultimate wireless remote control for your

Please remove any pop sockets or cases the have metal holding ring,

this will prevent the charging pad from working and may damage the device.

Also thick cases or metal cases will prevent the pad from charging the

phone or may cause the phone to overheat, please use caution.

receiver. You can download Jensen Smart app from Apple App Store or

Google Play Store and install it on your smartphone or tablet.

Please scan the following QR code to download Jensen J Link APP P2 to

your smart phone.

APP Operation

NOTENOTE

Voice Activation Operation

Bluetooth should be paired between your smartphone and the receiver.

Press the voice activation button , and the receiver will switch into Bluetooth mode,

This will activate Siri

or Google Assistant

on your smartphone. You will need to

manually switch back to the previous or desired mode once this operation is terminated.

Front panel USB port support 1A charging/Play-

back.

Putting Phone

on Wireless

Charging Pad

Charging Status

Phone Removal

LED Indicator：

LED Indication Standby Normal Charging Fast Charging Full FOD/Error Low Power Over Temperature

LED-A(Red)

Off after

10S On

3S Flashing Off Off Off OffOn

LED-B(Green)

Off 3S Flashing 3S Flashing On

0.5S Flashing 0.5S Flashing

Off

MPQ914

Wiring Diagram-Inputs/Outputs

IGNITION / ACC 12V(+) RED

BATTERY 12V (+) YELLOW

CHASSIS GROUND BLACK

REMOTE TURN-ON(+)

POWER ANTENNA (+) DARK BLUE

WHITE

WHITE/BLACK

GRAY

GRAY/BLACK

GREEN

GREEN/BLACK

VIOLET

VIOLET/BLACK

FRONT LEFT SPEAKER

FRONT RIGHT SPEAKER

REAR LEFT SPEAKER

REAR RIGHT SPEAKER

TYPICPAL FRONT-LOAD DIN

MOUNTING METHOD

Wireless Charging sequence USB Charging

Wireless Charging Caution

Step #1

Press OPEN to open or close the

wireless charging pad.

Step #2

Open phone holder on the

bottom of the pad.

Note – Use the phone holder

on the top of the pad in order to

hold the smartphone more firmly.

Step #3

Step #4

Place the smart phone on the wireless

charging pad to begin charging.

Note: LED Indicator for Charging Status

Charging: Flashing Red or Green

Fully Charged: Solid Green

Press OPEN to close the wireless

charging pad.

Note: Before retracting the

charging pad, make sure to close

the phone holder. The pad will not

retract if the holder is open.

www.jensenmobile.com

NSA1019-V01

Step #5

For phones that do not support wireless charging, insert the charging cable

that came with your phone into the USB port and place the phone on the

phone mount pad.

USB

Namsung America Inc.

1-888-921-4088

Radio removal keys

To download a complete owner’s manual

visit www.jensenmobile.com

or call customer service

1-888-921-4088

(Monday-Friday,9AM-5PM EST)

1.Mute/Power

2.Voice Activation

3.Open

4.End Call

5.USB Port

6.Aux Input

7.Preset 6/Folder Up

8.Preset 5/Folder Down

9.Preset 4/Play/Pause

Button Operation

Press the Open button on the front panel, and the

Wireless Charging Pad will automatically slide

out from the unit. Open the phone holder at the

bottom after the pad has completely slid into

the position. Lift the buckle on the top of the

pad to securely support the phone (Only supports

phones with wireless charging feature).

After the phone enters charging mode, the LED

status indicator will begin to flash at the bottom

of the pad. Normal charging mode will be

indicated by a flashing red and green LED. Fast

charging mode will be indicated by a flashing

green LED indicator. When charging is completed,

the LED will remain solid green.

Once the phone has completed charging, remove

the phone and close the phone holder at the

bottom of the pad. Press the Open button to

retract the pad. If the phone holder on the pad is

not closed, the charging pad will not retract.

10.Preset 3/Intro Scan

11.Preset 2/Random

12.Preset 1/Repeat

13.Band/Disp

14.Mode

15.VOL Up/Down/Menu

16.Tune/Track Up

17.MIC

18.Tune/Track Down

Produkt Specifikationer

Mærke:	Jensen
Kategori:	Modtager
Model:	MPQ914

Har du brug for hjælp?

Hvis du har brug for hjælp til Jensen MPQ914 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Jensen Manualer

Jensen XDA95RB Manual

10 December 2024

Jensen MPR210RGB Manual

24 Oktober 2024

Jensen VX3518 Manual

2 Oktober 2024

Jensen CAR710-4 Manual

6 September 2024

Jensen CMR270 Manual

6 September 2024

Jensen CAR710-4BC Manual

6 September 2024

Jensen CMR2724 Manual

6 September 2024

Jensen MPR420 Manual

2 September 2024

Jensen MPQ914 Manual

1 September 2024

Jensen CAR1013 Manual

28 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Sirus I-Amp 1.300T Manual

30 Juli 2025

PAC AP4-FD32 Manual

30 Juli 2025

CYP PUV-1540S-RX Manual

30 Juli 2025

ART USB Dual Pre Manual

29 Juli 2025

SSL Pure Drive Quad Manual

29 Juli 2025

SSL Pure Drive Octo Manual

29 Juli 2025

CYP PUV-1550SRX Manual

29 Juli 2025

SSL SMC70B Manual

29 Juli 2025

UNiKA NBB-1616 Manual

29 Juli 2025

PAC AP4-GM81 Manual

29 Juli 2025