JL Audio Stealthbox SB-GM-SLVCTR2/10W3v3/BK Manual

JL Audio Ikke kategoriseret Stealthbox SB-GM-SLVCTR2/10W3v3/BK

Læs gratis den danske manual til JL Audio Stealthbox SB-GM-SLVCTR2/10W3v3/BK (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 23 anmeldelser. Har du et spørgsmål om JL Audio Stealthbox SB-GM-SLVCTR2/10W3v3/BK, eller vil du spørge andre brugere om produktet?

Side 1/8
I N S T A L L A T I O N G U I D E
for the
SB-GM-SLVCTR2/10W3v3
SKU# 94350 - 94353
2007 - 2013 Silverado, Sierra, Avalanche, Suburban, Tahoe, Yukon & Yukon XL
with Front Row 40/20/40 Split Bench Seating
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper installation, your new vehicle-
specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation
professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle
properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your
authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox ® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
S T E P 1
Remove any contents from the front seat area.
Flip the center seat back / storage bin in the up position.
Continued on Next Page
S T E P 2
Move both front seats all the way forward.
From the passenger side of the vehicle, look to the side of
the center seat back / storage bin.
Remove the black plastic push clip.
Remove the plastic trim.
S T E P 3
From the driver’s side of the vehicle, look to the side of the
center seat back / storage bin.
Remove the bolt and plastic trim.
SB-GM-SLVCTR2/10W3v3_INSTR_SKU#011248
INSTALLATION
D I F F I C U L T Y :
25
OUT
OF
ESTIMATED TIME:
12 HOURS
Continued on Next Page
SB-GM-SLVCTR2/10W3v3_INSTR_SKU#011248
S T E P 7
Remove the plastic tray from vehicle.
S T E P 6
Grab a hold of the bottom cushion and pull forward.
Remove the bottom cushion from the vehicle.
S T E P 5
From the passenger’s side of the vehicle, look to the side of
the center seat back / storage bin.
Use an hex key to remove the black bolt that secures the
gray bracket to the center seat back / storage bin.
S T E P 4
From the driver’s side of the vehicle, look to the side of the
center seat back / storage bin.
Use an hex key to remove the black bolt that secures the
gray bracket to the center seat back / storage bin.
Page 2 • JL Audio, Inc 2016
S T E P 9
Remove the four front nuts that secure the seating to the
floor.
S T E P 1 1
Slide the rear of the Stealthbox® into the mounting area first,
then drop the front of the Stealthbox® into place.
S T E P 1 0
Run speaker wire from the amplifier location to the
Stealthbox® location.
S T E P 8
Remove the four rear bolts that secure the seating to the
floor.


Produkt Specifikationer

Mærke: JL Audio
Kategori: Ikke kategoriseret
Model: Stealthbox SB-GM-SLVCTR2/10W3v3/BK

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-GM-SLVCTR2/10W3v3/BK stil et spørgsmål nedenfor, og andre brugere vil svare dig