Description:
The Hestia-915 is the next generation in versatile wire operated alarm systems. The control panel provides eight
protection zones: FIRE, TAMPER and six programmable loops. All loops are balanced with End Of Line resistors. Most
control panel functions are programmable, resulting is a very flexible system. Control panel is offered in different housing
options (H-915C - plastic housing with built in keypad & display, H-915M - metal housing, H-915P - plastic housing
without keypad & display, H-915B - only main board, H-915K - external keypad).
An assortment of optional devices can be connected to the control panel (detectors, external keypads, remote controls,
telephone dialers, etc.). Refer to your Jablotron catalog for more details, or contact your local Jablotron dealer. Please
note that Jablotron strongly recommends professional installation of this system.
SPECIFICATIONS:
power:
transformer required: 15VAC/20VA or DE-20-15
backup battery required: 12V, from 1.2Ah to 40Ah
stand-by consumption: 25mA
back-up power output: 12V, max. 500mA
inputs:
eight loops: FIRE, TAMPER and 6 fully programmable loops
type of loops: balanced with End Of Line resistor 10k
remote control inputs: digital bus for external keypads, programmable optional pulse input
outputs:
overswitching relay contact: 1A at 60 V
external siren output: 0.5A at 12 V
backup siren output: +BS
fire alarm output: 0.2A to GND
arm output: 0.2A to GND
panic output: 0.2A to GND
internal siren: 0.2A to GND (H-915C built-in)
codes:
Master code, five user codes, panic code, One Time Use code and installer code: all codes are four digits. All codes
and settings are stored in non-voltage memory
FRONT PANEL
(The following description is for the control panel of the H-915C as well as for the front panel of the external keypad
model H-915K)
Display:
1 POWER - (Green LED) continuously lit indicates that the power supply is properly functioning . A blinking led means
that the system is powered only by the back up battery. If this LED is off, the system has no A.C. power and the back-up
battery is discharged.
H-915 installation manual 11/2 TBT502 01
