Kenwood Excelon XM802-5 Manual

Kenwood Modtager Excelon XM802-5

Læs gratis den danske manual til Kenwood Excelon XM802-5 (10 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Kenwood Excelon XM802-5, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

X802-5

XM802-5

CLASS D FIVE CHANNEL POWER AMPLIFIER

INSTRUCTION MANUAL

AMPLIFICATEUR DE PUISSANCE 5 CANAUX CLASSE D

MODE D’EMPLOI

AMPLIFICADOR DE POTENCIA DE 5 CANALES CLASE D

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best performance from

your new power amplier.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the

space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for

information or service on the product.

Model X802-5 / XM802-5 Serial number

US Residence Only

248 mm (9-3/4 )

53 mm

(2-1/16)

169 (6-5/8 ) mm 

Accessories / Accessoires / Accesorios

①

Ø4×16 mm

Self-tapping screws

Vis taraudeuses

Tornillo autorroscantes 4②Speaker level input cable

Câble d’entrée de niveau d’enceinte

Cable de entrada del nivel de altavoces 1

Dimensions / Dimensions / Dimensiones

KENWOOD

JVCKENWOOD Corporation

■

/ @

KIMV00D

@ / " @

Safety precautions

WARNING

To prevent injury or re, take the following precau-

tions:

• Mounting and wiring this product requires skills and

experience. For safety’s sake, leave the mounting and

wiring work to professionals.

• When extending the ignition, battery, or ground wires,

make sure to use automotive-grade wires or other

wires with the range of 5 mm2 (AWG 10) or more to

prevent wire deterioration and damage to the wire

coating.

• To prevent a short circuit, never put or leave any metal-

lic objects (such as coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells,

turn off the power immediately and consult your

KENWOOD dealer.

• Do not touch the unit during use because the sur-

face of the unit becomes hot and may cause burns if

touched.

CAUTION

To prevent damage to the machine, take the follow-

ing precautions:

• Be sure the unit is connected to a 12 V DC power sup-

ply with a negative ground connection.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of water

splashing.

• When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating

may cause your unit to malfunction.

• To prevent a short circuit when replacing a fuse, rst

disconnect the wiring harness.

NOTE

• If you experience problems during installation, consult

your KENWOOD dealer.

• If the unit does not seem to be working right, consult

your KENWOOD dealer.

Cleaning the unit

If the front panel gets dirty, turn o the power and wipe

the panel with a dry silicon cloth or soft cloth.

CAUTION

Do not wipe the panel with a hard cloth or a cloth damp-

ened by volatile solvents such as paint thinner and alco-

hol. They can scratch the surface of the panel and / or

cause the indicator letters to peel o.

To prevent battery rise

When the unit is used in the ACC ON position without

turning the engine ON, it depletes the battery. Use it after

starting the engine.

Protection function

The protection function is activated in the following

situations:

This unit is equipped with a protection function for

protecting this unit and your speakers from various acci-

dents or problems that can occur.

When the protection function is triggered, the power

indicator goes o and the amplier stops operating.

• When a speaker wire may be short-circuited.

• When a speaker output contacts ground.

• When the unit malfunctions and a DC signal is sent to

the speaker output.

• When the internal temperature is high and unit won’t

operate.

Wiring

• Take the battery wire for this unit directly from the bat-

tery. If it’s connected to the vehicle’s wiring harness, it

can cause blown fuses etc.

• If a buzzing noise is heard from the speakers when the

engine is running, connect a line noise lter (optional)

to each of the battery wire.

• Do not allow the wire to directly contact the edge of

the iron plate by using Grommets.

• Connect the ground wire to a metal part of the car

chassis that acts as an electrical ground passing elec-

tricity to the battery‘s negative terminal. Do not turn ⊖

the power on if the ground wire is not connected.

• Be sure to install a protective fuse in the power cord

near the battery. The protective fuse should be the

same capacity as the unit’s fuse capacity or somewhat

larger.

• For the power cord and ground, use a vehicle type

(reproof ) power wring cord. (Use a power wiring cord

with the range of 5 mm2 (AWG 10) or more.)

• When more than one power amplier are going to be

used, use a power supply wiring wire and protective

fuse of greater current-handling capacity than the total

maximum current drawn by each amplier.

Speaker selection

• Using speakers with smaller input ratings than the

amplier’s output power would result in smoke gener-

ation or equipment failure.

• The impedance of the speakers that are going to be

connected should be 2 Ω or greater (for stereo con-

nections, amplier SUB), or 4 Ω or greater (for bridged

connections). When more than one set of speakers are

going to be used, calculate the combined impedance

of the speakers and then connect suitable speakers to

the amplier.

Combined

impedance

■

___

..,;;..ii

____

---·

80~

Produkt Specifikationer

Mærke:	Kenwood
Kategori:	Modtager
Model:	Excelon XM802-5

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenwood Excelon XM802-5 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Kenwood Manualer

Kenwood X5001-1 Manual

24 Juli 2025

Kenwood X8001-5 Manual

23 Juli 2025

Kenwood X3001-4 Manual

23 Juli 2025

Kenwood DMX6523DABS Manual

14 Juli 2025

Kenwood eXcelon DMX9724XDS Manual

21 Juni 2025

Kenwood eXcelon DAX8000XDS Manual

20 Juni 2025

Kenwood DMX9724XS Manual

19 Juni 2025

Kenwood Excelon X303-4 Manual

20 Februar 2025

Kenwood Excelon X803-5 Manual

20 Februar 2025

Kenwood Excelon X503-1 Manual

18 Februar 2025

Modtager Manualer

Nyeste Modtager Manualer

CYP AU-A220 Manual

30 Juli 2025

Sirus I-Amp 8.150T Manual

30 Juli 2025

AER Colourizer 2 Manual

30 Juli 2025

Sirus I-Amp 1.300T Manual

30 Juli 2025

PAC AP4-FD32 Manual

30 Juli 2025

CYP PUV-1540S-RX Manual

30 Juli 2025

ART USB Dual Pre Manual

29 Juli 2025

SSL Pure Drive Quad Manual

29 Juli 2025

SSL Pure Drive Octo Manual

29 Juli 2025

CYP PUV-1550SRX Manual

29 Juli 2025