Selectable band:
: FM1/FM2/FM3/AM/SW1/SW2
: FM1/FM2/FM3/AM
• “ST” lights up when receiving an FM stereo broadcast with sufficient signal
strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.
Search for a station
1 Press SRC repeatedly to select RADIO.B
2 Press BAND repeatedly (or press #FM+/*AM– on the remote control)
to select the band.
3 Press / (or press / (+) on the remote control) to S T S T
search for a station.
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
• Press and hold one of the number buttons (1 to 6).To store a station:
• Press one of the number buttons (1 to 6) (or To select a stored station:
press one of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
(using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a station frequency.
3 Press ENT to search for a station.IW
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
Other settings
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
Default: [XX]
[TUNER SETTING]
[SEEK MODE] Selects the searching method for
S T /
buttons when pressed.
[AUTO1] [AUTO2]: Automatically search for a station. ; : Search for a preset
station. ; : Manually search for a station.[MANUAL]
[LOCAL SEEK]*1 [ON] [OFF]: Searches only stations with good reception. ; : Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
[AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;
[NO]: Cancels.
• Selectable only if is selected for . (Page 5)[NORMAL] [PRESET TYPE]
[MONO SET] [ON]: Improves the FM reception, but the stereo effect will be lost. ;
[OFF]: Cancels.
*1 : AM/SW1/SW2 stations only.
: FM stations only.
