Klein Tools VDV427-805 Manual

Klein Tools Ikke kategoriseret VDV427-805

Læs gratis den danske manual til Klein Tools VDV427-805 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Klein Tools VDV427-805, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

OPERATING INSTRUCTIONS

Impact Punchdown Tool

(VDV427-013)

Punchdown Multi-Tool

(VDV427-047)

CUT

INSTRUCCIONES DE OPERACIÓN

Herramienta ponchadora de impacto

(VDV427-013)

Multiherramienta ponchadora

(VDV427-047)

INSTRUÇÕES DE OPERAÇÃO

Ferramenta de Impacto

(VDV427-013)

Ferramenta de impacto multiuso

(VDV427-047)

DIRECTIVES D'UTILISATION

Outil d'insertion à impact

(VDV427-013)

Outil d'insertion de

câble polyvalent

(VDV427-047)

KLEIN TOOLS, INC

Chicago, IL USA

110 TYPE PUNCHDOWN INSTRUCTIONS

1. Insert the 110 terminating blade into the punchdown tool.

2. Choose the correct end of the blade depending whether or not the wire is to be cut

off. (Figures 10 & 11 show use of the cutting end).

3. Select the proper force setting – LO for all 110 type connections.

4. Lay the wires in the wire slots (see below).

5. Slide the blade into the wire slot and verify the

orientation of the punchdown blade before moving to step

6 (Figure 10). (This is to avoid cutting wire unintentionally

during the punchdown operation; refer to step 2.)

6. Push down on the cushion-grip end of the punchdown

tool with the palm of your hand until it clicks (Figure 11).

7. Slide the blade out of the wire slot and make sure

the wire is properly seated in the bottom of the wire slot between the insulation

displacement connector’s (IDC) blades.

8. Verify that the punchdown tool has seated the wire completely and correctly in the

IDC. Proper use of the punchdown tool should ensure this is done correctly, but it is

always a good idea to verify and test.

Impact (force)

Setting 66 Panel/Block/

Terminal 110 Cross-connect Panels

/Blocks/Keystones Jacks

LOW

24-26 gauge conductors All

23 and larger

gauge connectors

DO NOT USE

56 8

4687

66 TYPE PUNCHDOWN INSTRUCTIONS

1. Insert the 66 terminating blade into the punchdown tool.

2. Choose the correct end of the blade depending whether or not the wire is to be cut off.

(Figures 12 & 13 show use of the cutting end).

3. Select the proper force setting depending on the application. (see table below).

4. Lay the wires in the openings on the post, (see below).

5. Slide the blade over the post and verify orientation of

the punchdown blade before moving to step 6 (Figure

12). (This is to avoid cutting the wire unintentionally

during punchdown operation, refer to step 2.)

6. Push down on the cushion-grip end of the

punchdown tool with the palm of your hand until it

clicks (Figure 13).

7. Slide the blade off of the post and make sure the wire is properly seated at the bottom

of the post between the insulation displacement connector’s (IDC)blades.

8. Verify that the punchdown tool has seated the wire completely and correctly in the IDC.

Proper use of the punchdown tool should ensure this is done correctly, but it is always

a good idea to verify and test.

Fig.11

56 8

4687

56 8

4687

CUT

Punchdown tools and accessories

Tool / Blade / (Acc.) Blade / Acc.

Cat. No. Tool with

Blade Cat.No

Impact Punchdown

Tool Chassis

N/A VDV427-013 &

VDV427-047

110 Blade - 110 Cut / 110 Terminate

VDV427-015

VDV427-805

66 Blade - 66 Cut / 66 Terminate

VDV427-016

N/A

66 / 110 Combination Blade

66 Cut / 110 Cut

VDV427-017

VDV427-800 &

VDV427-806

66 / 110 Combination Blade

66 Cut / 110 Cut with

WorkEndsTM

Kit

VDV427-017 & VDV770-

050

†

VDV427-807

DURABLADE

VDV427-104

N/A

WorkEndsTM Kit: Kit includes adapter

and 4 driver bits (#1 and #2 Phillips

and 3/16” and 1/4” Slotted).

VDV770-050 † N/A

ENGLISH ESPAÑOL

Fig.12 Fig.13

Produkt Specifikationer

Mærke:	Klein Tools
Kategori:	Ikke kategoriseret
Model:	VDV427-805

Har du brug for hjælp?

Hvis du har brug for hjælp til Klein Tools VDV427-805 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Klein Tools Manualer

Klein Tools VDV826-705 Manual

12 August 2025

Klein Tools VDV826-602 Manual

12 August 2025

Klein Tools 66188 Manual

29 Juli 2025

Klein Tools 56334 Manual

15 Juli 2025

Klein Tools 56074 Manual

15 Juli 2025

Klein Tools SPF50LOT15 Manual

15 Juli 2025

Klein Tools SPF50SPY55 Manual

15 Juli 2025

Klein Tools 60956 Manual

9 Juli 2025

Klein Tools 50550 Manual

13 Juni 2025

Klein Tools VDV826-704 Manual

3 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech ARK-2230L-3S51 Manual

15 August 2025

Advantech ARK-3520P-U7A1E Manual

15 August 2025

JBL Tune 245 NC Manual

15 August 2025

Advantech WISE-4210-APNA Manual

15 August 2025

Advantech ADAM-3600-C2GL1A1E Manual

15 August 2025

Advantech ARK-2121L-3S51 Manual

15 August 2025

Advantech AMAX-5570-E2200A Manual

15 August 2025

Advantech ARK-1124U-S1A3 Manual

15 August 2025

Advantech ACP-4000MB-50F Manual

15 August 2025

Advantech WOP-208K-NAE Manual

15 August 2025