Kress KUB60.91 Manual

Kress Skruemaskine KUB60.91

Læs gratis den danske manual til Kress KUB60.91 (3 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Kress KUB60.91, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

060817- 1 DR www.elitescreens.com

Manual Pull- Down Projection Screen

Elite Manual Series

USER’S GUIDE

Pre-installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

INSTALLATION

Flush Wall Mounting

1. Measure the distance between the keyholes located on the back of the end cap

2. stalled for the pre- Mark the location of where the screen is to be in drilled hole.

3. the area and drilling the hole, insert the proper After marking screw into the drilled hole and leave

about 1/8” of an inch from the wall to mount the screen.

4. Mount your screen from the keyhole located on back of screen’s left and right end cap.

Back of end cap

Front view

Side view

060817- 2 DR www.elitescreens.com

Flush Ceiling Mounting

1. Measure the distance between the top screw holes located on

the top of the end caps.

2. Mark the location of where the screen is to be installed

for the pre-drilled hole.

3. Drill your hole, use a hollow wall anchor if needed

4. Insert the proper screw into the drilled hole and the secure

screen to the ceiling.

Ceiling Suspended Mounting (additional hardware required)

Optional installation using a chain to hang the screen from the ceiling.

1. You can also hang the screen on a ceiling by using a chain and hang it by the two loops (models 71-120)

located on ea (models 135-170).ch end of the case or by the end cap’s ears

SCREEN OPERATION

Note: Always pull the screen down or let it up in a 90-degree vertical angle. Do not allow the screen to touch

the screen case when the screen goes up or comes down to avoid damaging the screen material.

Note: Chain and U bolt/D ring not included.

Produkt Specifikationer

Mærke:	Kress
Kategori:	Skruemaskine
Model:	KUB60.91

Har du brug for hjælp?

Hvis du har brug for hjælp til Kress KUB60.91 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skruemaskine Kress Manualer

Kress KUB33.91 Manual

25 August 2024

Kress KUB30.9 Manual

25 August 2024

Kress KUB30.91 Manual

22 August 2024

Kress KUD12.91 Manual

22 August 2024

Kress KUB50.2 Manual

22 August 2024

Kress KUB35.91 Manual

22 August 2024

Kress KUB60.9 Manual

22 August 2024

Kress KUB30.2 Manual

22 August 2024

Kress KUB61.91 Manual

22 August 2024

Kress KUB60.2 Manual

22 August 2024

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

Milwaukee M18 2658-20 Manual

13 August 2025

Milwaukee M18 Fuel 2957-20 Manual

13 August 2025

Milwaukee M18 2663-20 Manual

13 August 2025

Milwaukee M12 FUEL 2564-20 Manual

13 August 2025

Milwaukee M18 Fuel 3060-20 Manual

12 August 2025

Milwaukee M18 Fuel 2869-20 Manual

12 August 2025

Milwaukee M12 Fuel 3453-20 Manual

12 August 2025

Milwaukee M18 Fuel 2867-20 Manual

12 August 2025

Makita DDF489 Manual

11 August 2025

Ozito PXIDS-300U Manual

10 August 2025