La Crosse Technology 308-1911V2 Manual


Læs gratis den danske manual til La Crosse Technology 308-1911V2 (2 sider) i kategorien Termometer. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om La Crosse Technology 308-1911V2, eller vil du spørge andre brugere om produktet?

Side 1/2
TIME ALARM
1. Hold the ALARM button to enter alarm time set mode. The
hour will flash. Press the + or - button to adjust alarm hour.
2. Press the ALARM button to confirm and move to minutes.
Press the + or - button to adjust the alarm minutes.
3. Press the ALARM button to confirm and exit.
Note: When you finish alarm settings, the alarm is active. The
bell icon will show.
Activate/Deactivate Alarm:
From normal time display, press and release the ALARM
button to deactivate or to activate the alarm. The alarm
time will show for 2 seconds.
When active, the Bell Icon will show.
When the icon is not showing, the alarm is not active and
will not go o.
Page | 2 Page | 3 Page | 4
Indoor Temperature and Humidity Station
Model: 308-1911v2
DC:011618
POWER UP
1. Insert 2 AAA batteries into the back of the station.
2. Set language, time, calendar, and temperature units.
Hold the SETTINGS button to enter settings mode.
Press the + or - button to adjust the values.
Press the SETTINGS button to confirm adjustments and move
to the next item.
Press the ALERTS button at any time to exit.
Setting menu order:
1. Language (English | Espol | Francais)
2. Beep ON/OFF
3. Hour
4. Minutes
5. Year
6. Month
7. Date
8. Temp Fahrenheit / Celsius
SETTINGS
SET HI/LO HUMIDITY ALERT
Set Alerts:
1. Hold the ALERTS button 2 seconds to enter alert setting.
2. HI Humidity Alert OFF will show. Press the + button to arm
the alert in order to set it.
If you do not wish to arm the alert, press the ALERTS Note:
button to move to the LO Humidity alert.
3. When HI ALERT ON is showing, press the + or – buttons to
adjust alert value.
4. Press ALERTS to move to the LO Humidity Alert. Press
ALERTS button again to exit if you do not want to set a LO
Humidity Alert.
Arm/Disarm Humidity Alerts:
1. Hold the ALERTS button 2 seconds to view HI Humidity
2. Press the button to arm an alert. +
3. Press the button to disarm an alert.
4. Press ALERTS button to move to the LO Humidity alert.
5. Press the button to arm an alert. +
6. Press the button to disarm an alert.
AAA
AAA
CUSTOM WEEKDAY | DATE DISPLAY
• Press and release the SETTINGS button to display either
the full Weekday, or three letter Weekday, Month, & Date.
• The station will remain on the date display chosen.


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Termometer
Model: 308-1911V2

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 308-1911V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig